How to Draw Wave Swells in Procreate
StyleFrame Team9 min read
To draw wave swells in Procreate, work on a wide landscape canvas and build the water from large, overlapping S-curves, not a single breaking crest. Block in the swell's form with a few dark-to-light values on one layer, add color on a separate layer, then paint soft highlights along the ridges and only a little foam. Keep the water in separate layers or groups so you can export a layered PSD and animate it in After Effects.
What Makes a Swell Different From a Breaking Wave
A breaking wave is a single dramatic event: a curling lip, spray, and a collapsing face. A swell is the long, rolling energy that travels across open water before it reaches shore. It has no curl and very little foam, so it depends on shape, value, and rhythm.
That matters because most Procreate wave tutorials teach the crest-and-foam recipe. If you apply that to a swell, you get a messy surface that looks like surf. For swells, think in terms of:
- Wavelength: the distance between ridges, which shrinks with perspective as the water recedes.
- Amplitude: how tall each ridge is relative to its trough.
- Direction: the angle at which the swell travels, with secondary chop crossing it.
- Light: how the sky reflects on the slopes facing you and how the back slopes fall into shadow.
For a motion designer, a swell is also easier to animate than a breaking wave. It's a repeating, scrolling form you can drive with simple transforms and displacement.
Set Up the Canvas
Start with a landscape canvas that matches your delivery frame. If the piece is headed for video, use 3840×2160 or 1920×1080 so you don't resample later. Pick the smallest size that still holds up at your output resolution.
A few setup choices pay off later:
- Color profile: use sRGB for standard video work. Mixing profiles between Procreate and your compositing project can cause washed-out or oversaturated water.
- Wider than the frame: if the swell will scroll or loop, paint the water layers wider than the frame, even twice as wide, so you have room to move them in After Effects without exposing empty edges.
- Drawing Guide: turn on a 2D grid or isometric-style guide only if you want help aligning horizon lines. Otherwise, a single flat horizon line on its own layer is enough.
Step 1: Thumbnail the Rhythm
Before painting, make a small sketch on a new layer using a pencil or inking brush. Don't draw individual waves. Draw the flow:
- Place the horizon around the upper third or lower third of the frame, depending on whether the sea or the sky is the subject.
- Draw three or four long S-shaped bands that run across the frame and slightly diagonally.
- Make the bands closer together and thinner near the horizon, and wider and more separated in the foreground.
- Vary the spacing so the pattern doesn't feel mechanical. Evenly spaced swells look like a corrugated roof.
Lower the sketch layer's opacity once you've settled on the pattern. You'll paint beneath and over it, not trace it line by line.
Step 2: Block In Values First
Create a new layer under your sketch and fill it with a mid-tone blue-gray. Then, on another layer, paint the form in grayscale or in a single hue:
- Use a soft airbrush or a medium-hardness round brush for broad strokes.
- Paint the front slope of each swell lighter if the light source is behind the water, or darker if the light comes from behind the viewer. Pick one and stay consistent.
- Paint the trough between swells darkest, because it's the area least exposed to the sky.
- Keep edges soft on the ridges and slightly firmer where one swell overlaps another.
Squint at the canvas or temporarily drop the saturation to check that the shapes still read. If you can see rolling forms in grayscale, the color pass will go quickly. If they look flat, fix it now.
Step 3: Add Color on Separate Layers
Place a new layer above your value layer and set its blend mode to Color, or paint on a normal layer and clip it to the values. Clipping masks keep your color inside the shapes you've already defined.
For believable water:
- Reflect the sky. Water takes on the color of what's above it. A warm sunset sky should push warm tones into the highlights of the swell, while the troughs stay cooler and deeper.
- Shift hue, not just brightness. Move the shadows toward teal or deep blue and the lights toward a paler, slightly warmer tone. A single blue lightened and darkened looks like plastic.
- Use atmospheric perspective. Make the distant swells lighter, lower in contrast, and closer to the horizon color. Foreground swells should have the strongest contrast.
Alpha Lock is useful here. Lock a layer and brush color through it without disturbing the shape.
Step 4: Paint Highlights and Surface Texture
Swells catch light as thin, bending streaks. Create a new layer and use a small round or textured brush at low flow:
- Follow the curve of each ridge with broken, tapered strokes. Stronger highlights belong where the surface faces the light source or sky most directly.
- Add faint, short strokes of chop at an angle to the main swell direction. This secondary pattern sells scale.
- Keep highlight density highest near the horizon where reflections compress, and sparser in the foreground where you see more of the water's depth.
If you want a smoother, more stylized look, use the Liquify tool sparingly to push ridges into cleaner curves, or Smudge with low pressure to blend. Heavy smudging flattens texture, so use it to clean edges, not to build the form.
Step 5: Use Foam With Restraint
Swells in open water rarely have heavy foam. A few wind-driven whitecaps are plenty. Use a textured brush on a dedicated layer to add:
- Small broken patches along the very top of a few ridges.
- A faint trailing streak behind each patch, pulled in the direction of the swell.
- A little extra brightness where light hits the foam, kept subtle.
Keeping foam on its own layer is practical. You can lower its opacity, mask it, or animate it separately without repainting the water.
Structure Layers for Animation
If the artwork is purely a still, layer organization is a convenience. If it's going into After Effects, it becomes the foundation of the shot. A workable group structure, top to bottom:
- Foam and whitecaps
- Highlights and glints
- Chop and fine texture
- Color layers
- Value/form layers (split into near, mid, and far swells if possible)
- Horizon and sky
- Base fill
Splitting the water into near, mid, and far bands lets you move each at a different speed, which creates parallax and depth without 3D. Export as a PSD, then bring it into After Effects as a composition with layer sizes retained. From there you can:
- Apply a displacement map or a wave-warp effect to each band at different amplitudes.
- Offset position slowly across the wider-than-frame layers for travel.
- Animate foam opacity independently to avoid a "pasted on" look.
Procreate also offers Animation Assist for frame-by-frame work. It suits short hand-drawn loops, but for a long, subtle swell, a layered still with procedural motion in After Effects is often more controllable.
Common Mistakes to Avoid
- Uniform spacing and size. Repeating the same wave shape reads as a pattern, not water.
- Too much foam. It turns calm swells into surf.
- Ignoring perspective. Without compression toward the horizon, the sea looks like a wall.
- Painting everything on one layer. You'll have nothing to animate and no safe way to revise.
- Hard black shadows. Water shadow is deep blue or green, rarely neutral gray or black.
- Inconsistent light. If highlights contradict the sky, the whole image feels off, even if viewers can't say why.
Taking Procreate Swells Into Motion With Styleframe
Procreate gets you a strong, art-directed still. The gap is turning that frame into convincing movement without repainting each frame by hand. Styleframe is an AI video and motion tool built for professional artistic control, and it can sit between your illustration and your compositing stage.
A few practical ways artists use it with this kind of artwork:
- Keyframe animation: set your painted swell as a start keyframe and a variation as an end keyframe, for example a different light state or shifted ridges, and generate the motion between them. You decide the beginning and end of the move, which is different from a one-click prompt.
- Restyle: use a reference image or clip to push footage or renders toward your painted look, so a Blender or Cinema 4D water pass can pick up the brushwork of your Procreate swell.
Generation is driven by references, clips, and keyframes. Styleframe exports image sequences, so the results can be brought into your comp like any other plate. Your compositing pipeline stays intact: color management, grading, and final assembly still happen where you already do them.
As always with generative tools, treat results as material to direct and refine, and check the output against your painted reference before it goes into a delivery comp.
Quick Workflow Checklist
- Create a landscape canvas at your delivery resolution, in sRGB.
- Thumbnail the swell rhythm with varied spacing and perspective.
- Block values on their own layer before adding color.
- Add color with clipping masks or Color-mode layers, reflecting the sky.
- Paint highlights, chop, and restrained foam on separate layers.
- Group layers into near, mid, and far bands.
- Export a layered PSD and animate in After Effects, or generate motion between keyframes with Styleframe and bring the sequence into your comp.
FAQ
Which Procreate brushes work best for swells? A soft round or airbrush for form and gradients, a medium round for highlights, and a textured brush for chop and foam. The built-in brushes are enough.
How do I make the swell loop? Paint the water wider than the frame, then animate position or a wave-warp effect in After Effects, and match start and end states. Test the loop at full speed before committing to details.
Can I use Procreate swells in a 3D scene? Yes. Use the painted layers as background plates or as reference for shaders in Blender or Cinema 4D, then match the palette and light direction.