How to Draw Tree Silhouette on Procreate
StyleFrame Team8 min read
To draw a tree silhouette in Procreate, build the shape from tapered trunk and branch strokes, add foliage as clustered masses with a textured brush, then fill everything with one solid color on a transparent layer. Keep the outline readable on its own: uneven branch angles, gaps of sky between clumps, and a rough canopy edge matter more than any interior detail. Export the result as a transparent PNG or layered PSD and it drops straight into After Effects as a matte, a parallax layer, or a foreground frame.
Set Up the Canvas for Motion Work
Procreate tutorials usually assume a print-style canvas, such as A4 at 300 DPI. For a silhouette headed into a comp, set the canvas up for the timeline instead.
- Match your composition size. Create a custom canvas at 3840×2160 (or your project's resolution). If you plan to scale the tree up in a camera move, go larger. Larger canvases can limit how many layers you get, so check what your iPad allows.
- Keep the background layer separate. Leave a pale gray or sky-colored layer underneath so you can see the silhouette, then hide it before export so the file has real transparency.
- Work in solid black or a single dark value. Color is irrelevant for a silhouette, and you can tint it later in After Effects with a Fill or Tint effect.
- Plan layers early. If you want parallax, draw the trunk, branches, and foliage clusters on separate layers. Splitting a flattened silhouette afterward is tedious.
Choose the Right Brushes
A silhouette needs two kinds of brush: a clean one with pressure-sensitive taper for wood, and a textured one for foliage.
For trunks and branches: The Studio Pen in the Inking set works well. Choose a pen whose strokes start thin, thicken in the middle, and can end thin again, and add a little stabilization if long curves wobble. Taper is what makes branches read as growing rather than pasted on.
For foliage: Pick a brush with irregular edges, such as a dry brush, a sponge-like texture, or a textured brush from the Organic set. A hard-edged square brush used in loose dabs also works. The goal is a ragged boundary, since a perfectly smooth canopy looks like a cloud or a bush.
Step-by-Step: Draw the Silhouette
1. Gather reference and decide the species
Trees are recognizable by their overall shape, so pick one type and commit to it.
- Oak or maple: wide, rounded canopy with thick, crooked limbs
- Pine or spruce: tall, narrow, layered triangular tiers
- Birch or willow: slender trunk with drooping or fine branches
- Bare winter tree: the branching structure itself is the whole silhouette
- Palm or acacia: minimal trunk with a distinctive crown
Keep a photo shot against the sky nearby as reference. Backlit photos already show you the silhouette, including where light gaps appear.
2. Block in a rough gesture on a sketch layer
Create a new layer, lower its opacity, and use a pencil to mark the overall envelope: trunk height, canopy width, and the main direction of lean. Real trees are rarely symmetrical, so push the mass to one side and let one limb extend farther than the others.
Keep this stage loose. You are deciding proportions, such as how much of the height is trunk versus canopy, not drawing details.
3. Draw the trunk and primary limbs
On a new layer, start at the base. Draw the trunk with a slight flare at the bottom where roots spread. Then draw the main limbs from the trunk outward and upward:
- Start each limb thick at the join and let the stroke thin as it travels.
- Fork in twos and threes, with different angles at each fork.
- Alternate sides, and let a few branches cross in front of or behind each other. In a flat silhouette this overlap reads as a single tangle, which adds realism.
A useful technique from a Procreate community tutorial is to draw strokes toward the trunk, from the tips inward, using a pen that goes from thin to thick. Branches then merge into the trunk naturally instead of looking attached.
4. Add secondary and twig-level branching
Reduce brush size and add progressively finer branches. For a bare tree, this is where most of the time goes. Twigs should feel chaotic but not random: they tend to follow the direction of the limb they grow from, fanning out at shallow angles.
Stop adding detail when it would disappear at the intended on-screen size. A tree that fills a quarter of a frame does not need hundreds of hair-thin twigs.
5. Build the foliage as clumps, not a blob
On a new layer, use the textured brush to stamp foliage in clusters around branch ends. Think in groups: large masses, medium clusters, and small isolated leaf pads hanging off the edges.
- Leave gaps where sky shows through. These "sky holes" are what keep a canopy from reading as a solid lump.
- Vary the cluster sizes and spacing so the outline has rhythm.
- Let a few branches poke out past the foliage. They break the silhouette edge and add believability.
For evergreens, replace clumps with tiers: drooping, slightly irregular layers that get narrower toward the top.
6. Unify with a solid fill
Once the shape is right, merge the trunk, branch, and foliage layers (or duplicate them first so you keep the originals), then use Alpha Lock to fill with one flat color. Drag the color from the top-right circle onto the layer to flood-fill it while Alpha Lock is on. Everything inside the drawn shape becomes the same value, which gives you a true silhouette.
If you draw outlines first and fill after, use ColorDrop and adjust the threshold slider until the fill reaches the edges without leaking. Zoom in and check the thin branch tips, since those are where fills usually fail.
7. Clean the edge
Zoom to 200 percent and inspect the outline. Remove stray specks with the eraser, fix pinched branch joins, and check that no sky holes are accidentally closed. If the silhouette will be scaled up in the comp, make sure edges are crisp at full resolution rather than depending on soft brush falloff.
Common Mistakes That Make Silhouettes Look Fake
- Perfect symmetry. Rotate or mirror your canvas while drawing, then adjust one side so it differs.
- Uniform branch thickness. Always taper.
- Lollipop canopy. A circle on a stick looks like an icon, not a tree. Break the canopy into clusters.
- Branches that grow downward from the top. Limbs should generally reach up and out, with gravity affecting only the thin outer shoots on species such as willow.
- Too much interior detail. In a one-color shape, internal texture is invisible. Spend your effort on the outer contour.
Prepare the File for After Effects
How you export depends on how you will use the tree.
As a single transparent PNG: Hide the background layer, then use Share > PNG. Check that the checkerboard is visible behind the artwork before exporting. Import into After Effects and it arrives with its alpha channel.
As a layered PSD: Share > PSD preserves layers. In After Effects, import as Composition – Retain Layer Sizes so each element, such as trunk, mid branches, and foliage clusters, can move independently.
Common uses in a comp:
- Parallax foreground: Place several trees at different Z depths in 3D space with a camera. Larger, darker, blurrier trees near the camera sell depth.
- Atmospheric depth: Use slightly lighter values and a small blur on background trees, keeping the nearest ones fully dark.
- Wind sway: Apply the Puppet tool to branch tips, or use a Wave Warp or Turbulent Displace at a low amount on the foliage layer.
- Matte: Use the silhouette as a luma or alpha matte to reveal video, texture, or gradient skies inside the tree shape.
- Variation: Duplicate and flip a single tree, then scale and offset the copies. Do not reuse an identical copy side by side, since the repetition is easy to spot.
Where Styleframe Fits in the Pipeline
Procreate is the right tool when you want to draw the shape by hand. Some projects start from a photo or footage rather than a blank canvas, or need many stylistically consistent variations, and that is where may be worth a look. Check its current features and export options to see whether they fit your pipeline. Your hand-drawn Procreate silhouettes can stay as the source of truth for the shape.
Quick Checklist
- Canvas matches comp resolution, with a separate background layer
- Trunk and limbs drawn with tapered pressure strokes
- Foliage built from clusters with visible sky gaps
- Final shape filled with one solid color via Alpha Lock
- Edges inspected at high zoom
- Background hidden before export; PNG or PSD saved with transparency
- Layers split by depth if parallax is planned
A good tree silhouette comes down to a strong contour, a believable branching structure, and clean transparent output. Get those right in Procreate, and the file will behave predictably the moment it lands in your timeline.