How to Draw Tie Dye on Procreate
StyleFrame Team8 min read
To draw tie dye in Procreate, fill a square canvas with blocks of four or five bright colors, merge them, then use Liquify in Twirl mode to wind the colors into a spiral from one or more center points. Finish with white resist lines, a little texture, and soft edge bleed so it reads as dyed fabric instead of a digital gradient. The result works as a standalone illustration or as a texture you animate in After Effects, Cinema 4D, or Blender.
What You Need Before You Start
You don't need a custom brush pack. Everything below works with stock Procreate tools: Selection, Liquify, Smudge, and a handful of built-in brushes. A watercolor or textured brush set helps with the dye-bleed look, but it's optional.
If the artwork is headed for a motion project, make two decisions up front:
- Canvas size. Start at 4096 × 4096 px, or as large as your iPad's memory allows. Larger canvases mean fewer available layers, so plan to merge often. A big canvas lets you crop, scale, and push in on the texture later without it going soft.
- Color profile. In the custom canvas settings, choose sRGB if the file is going straight into a video pipeline. Display P3 looks richer on the iPad but can shift when it lands in an sRGB composition.
Step 1: Build a Tie Dye Palette
Pick four or five saturated colors. Classic combinations are magenta, yellow, cyan, and purple, or a full rainbow in spectrum order.
Order matters. Colors that sit next to each other on the wheel blend into clean intermediate hues when they twist together. Complementary pairs, such as green beside purple or orange beside blue, tend to mix into brown at the seams. Arrange your blocks so neighbors are analogous, and save the palette as a Procreate swatch set so you can reuse it.
Step 2: Block In the Color Sections
Real tie dye starts as folded fabric with dye applied in sections, so you want to mimic that structure before distorting it.
- Turn on Drawing Guide in the Canvas settings, edit it, and use a 2D grid so your selections snap cleanly.
- Open the Selection tool, choose Rectangle, and drag out a quadrant.
- Fill it by dragging a color from the palette into the selection.
- Repeat for each section on its own layer, or on one layer if you're confident, then merge.
For a classic spiral, four quadrants meeting at the center is the easiest start. For a more radial burst, use wedge-shaped Freehand selections instead.
Merge the color layers, then duplicate the merged layer and hide the original. That untouched copy is your backup. Liquify is destructive, and you will want to restart from the clean blocks more than once.
Step 3: Paint the Resist Lines
Tie dye's signature white lines come from fabric pressed together so dye can't reach it. Create a new layer above your colors and paint thin, slightly irregular white lines along the borders between color blocks and a few across them. A textured or dry-edged brush works better than a perfectly clean one, since the lines should look uneven.
Merge this layer into your color layer before you twirl. If you leave it separate, the lines won't distort with the colors and the illusion falls apart.
Step 4: Twirl the Design With Liquify
This is the step that does the real work.
- Tap Adjustments (the magic wand icon) and choose Liquify.
- Select Twirl Right or Twirl Left from the mode list.
- Set a large brush size so a single touch affects a big area.
- Keep Pressure moderate and Distortion at a mid value. Momentum can add a slightly looser swirl.
- Press and hold at the canvas center. The longer you hold, the tighter the spiral winds.
Release, then move to a second or third point if you want multiple knots, as you'd see on a shirt tied in several places. Small nudges with a smaller brush can pull a lazy arm of the spiral back into shape.
Don't overdo it. Past a certain point the stripes compress into mush and you lose the readable color bands. If that happens, Undo a few steps or restart from your backup layer.
Step 5: Soften the Edges and Add Dye Bleed
A straight Liquify result looks too crisp, like vector stripes. Real dye wicks into fabric.
- Use the Smudge tool with a textured or watercolor brush at low to medium strength, dragging along the boundaries between colors.
- Apply a small Gaussian Blur, just enough to take the digital edge off. Too much blur kills the resist lines.
- Paint extra dye on a new layer set to Multiply, letting colors overlap where saturation would naturally build up.
Alpha Lock and clipping masks are useful here. Lock a color layer's alpha, then paint a slightly different shade inside it to get variation without spilling over the edges.
Step 6: Add Fabric Texture
Add a layer above your artwork and fill it with a cotton or canvas photo texture, or use Adjustments > Noise Filter for a quick grain. Set it to Overlay or Multiply at a low opacity. This helps the image feel printed on cloth and gives later effects, such as displacement, something to catch.
If the piece will be a texture on 3D geometry, keep the fabric grain as its own layer so you can disable it or reuse it as a roughness or bump input.
An Alternative: Draw Tie Dye by Hand With a Brush
If you prefer a drawn, painterly feel over the folded-fabric structure, modify a stock brush rather than using Liquify.
- Duplicate a textured brush such as Blotchy into a new set so you don't alter the original.
- In Brush Studio, increase spacing so the stamps leave gaps, the way folds leave gaps in dye.
- Turn off Scatter and Jitter, and set rotation to Follow Stroke so the shape tracks your path.
- Squash the shape slightly so it reads as a streak instead of a round dot.
- Draw concentric spiral strokes, changing colors on separate layers and letting them overlap.
This gives you more control over each ring, though it's slower and less physically convincing than twirling a block-colored canvas. You can also combine both: twirl for the base, then hand-paint accents.
For symmetrical mandala-style tie dye, turn on the Symmetry drawing guide with Rotational mode and Assisted Drawing. Every stroke repeats around the center, which suits animated, looping designs.
Common Mistakes to Avoid
- Muddy colors. Usually caused by complementary hues sitting side by side. Reorder the palette.
- Over-twirling. Several short passes beat one long hold.
- Skipping the backup. Liquify can't be partially undone after you've moved on.
- Working small. A 1000 px canvas is fine for a tutorial, but it will fall apart when scaled to a 4K frame.
- Flattening too early. Keep texture, resist lines, and color on separate layers until the final merge.
Exporting for Motion Work
Export a flattened PNG or TIFF for a finished frame, or a PSD if you want to keep layers. Keep a copy of the pre-Liquify color blocks too, since you can re-twirl them differently for variations.
In After Effects, a tie-dye still gives you a lot to work with:
- Apply the Twirl effect and keyframe its angle to make the spiral wind and unwind.
- Use Turbulent Displace or a Displacement Map driven by Fractal Noise to make the dye look like it's flowing.
- Scale and reposition inside a precomp for slow push-ins that reveal the fabric grain.
- Use it as a background plate or a texture matte behind type.
In Cinema 4D or Blender, plug the image into a cloth or fabric material's base color, with the grain layer feeding bump or roughness. In Nuke, the same texture can serve as a plate for projection or as an STMap-distorted element.
Taking a Procreate Tie Dye Into AI-Assisted Motion With Styleframe
Procreate gives you a strong hand-built still. Getting it to move, or applying its look to other footage, is where can sit beside your existing tools. It's an AI video and motion tool built around artistic control instead of one-click generation.
A few practical ways it could fit this kind of project:
- Keyframes. Export two or three differently twirled versions of your tie dye and use them as keyframes, so the spiral evolves along a path you defined instead of one an AI guessed.
- Style reference. Use your Procreate artwork as a style reference and push its look onto footage or a rendered clip. Because the reference is your own drawing, the palette and texture stay anchored to your design.
Your compositing, color management, and finishing stay where they already are, and Styleframe just supplies a controlled generation step in the middle.
Final Thoughts
Drawing tie dye in Procreate comes down to a repeatable sequence: block the colors, add resist lines, twirl with Liquify, soften the edges, and layer texture. Work large, keep a clean backup, and think about where the file is going before you start. From there, you can leave it as an illustration, animate it with Twirl and displacement in After Effects, or use it as a reference and keyframe source for a motion piece with a distinctly hand-made look.