How to Draw Stained Glass in Procreate
StyleFrame Team9 min read
To draw stained glass in Procreate, sketch a simplified design on its own layer, trace it with a solid dark line for the lead came, then fill each glass piece with flat color on separate layers. Add glass texture with blend modes, noise, and blur, then finish with highlights and glow so the colors look lit from behind. Build every stage on its own layer and you can export a layered file that is easy to animate later.
What you need before you start
You need an iPad, Procreate, and an Apple Pencil or similar stylus. A brush pack made for stained glass is optional, since most of the look comes from a handful of default tools. Some stained glass designers work with very few brushes. One professional stained glass artist uses just three: a technical pen from the Inking set for crisp lines, a soft airbrush for glow, and a monoline brush from Calligraphy for consistent line weight.
Decide on a subject that survives simplification. Real leaded glass is made of cut pieces, so every shape has to be physically plausible. Tiny slivers, sharp interior angles, and hairline details are poor candidates. A bold animal, a botanical, or a symmetrical window motif gives you clean shapes to work with.
Step 1: Set up the canvas
Create a new canvas with the plus icon in the Gallery. Pick a size that matches your end use. For a motion project, work in pixels at your delivery resolution or higher, such as 3840 × 2160 for a UHD plate or a square 4096 × 4096 for a texture you can crop. If you plan to print a pattern or cartoon, 150 DPI is adequate for line-drawing printouts, but check the maximum layer count at your chosen size. Procreate limits layers based on canvas dimensions, and a stained glass file uses a lot of them.
Pick a dark background color for now. It helps you judge how the glass will glow later, and you can swap it for a lit backdrop at the end.
Step 2: Sketch and simplify
Start with a sketch layer. If you are working from a photo, open the Actions menu (the wrench), choose Add, then Insert a photo. Position it, lower its opacity, and create a new layer above it for your drawing.
Now draw only the major masses:
- Reduce the subject to bold shapes, as if each one were a piece of cut glass.
- Keep shapes large enough to hold color. If a region would be too small to cut, merge it with a neighbor.
- Let lines flow around forms. Radiating lines around an eye or curved lines following a petal read as intentional.
- Use Drawing Guide with Symmetry for rose windows, mandalas, and arches.
Turn on StreamLine in the brush settings to smooth shaky strokes. Close every shape completely, because gaps in the outlines cause color to leak when you fill later.
Step 3: Draw the lead lines
Create a new layer above the sketch and name it "Lead." Trace your sketch with a technical pen or monoline brush in a near-black color. Dark gray with a slight blue or brown tint looks more natural than pure black, and you can restyle it later.
Tips for convincing leading:
- Use a consistent line width. Thin lines read as pen drawing rather than metal. Many artists work around a medium weight and thicken outer borders.
- Join lines cleanly at intersections. Real came meets at junctions, so overshoot slightly and tidy the ends with the eraser.
- Keep the outer frame heavier than interior lines, which suggests structural support.
- Hide the sketch layer and check that every shape is fully enclosed.
Later you can duplicate this layer and add a bevel-like highlight along the top edge of each line, plus a soft shadow below, to suggest a soldered metal ridge.
Step 4: Colorize each piece
Put the colors on layers beneath the Lead layer. Pick a limited palette first. Stained glass looks best with saturated, jewel-like hues, so choose five to eight colors plus a couple of lighter and darker variations of each.
There are two reliable ways to fill:
- ColorDrop: Drag a swatch from the color wheel into a closed shape on a color layer. Set the Color Fill Threshold appropriately, and turn on "Reference" so Procreate reads the Lead layer when it decides where the boundaries are.
- Selection fill: Use the Selection tool in Automatic mode on the Lead layer, then fill on the color layer.
Group your colors by hue, for example one layer for blues, one for ambers, one for reds. This makes later adjustments faster, and you can nudge a whole family of colors with Hue, Saturation, Brightness or Curves without touching the rest of the piece.
Extend color slightly under the lead lines so there are no pale gaps at the edges. Because the Lead layer sits above, the overlap is hidden.
Step 5: Add glass texture
Flat fills look like a coloring book. Glass needs variation. Use Alpha Lock or a Clipping Mask on each color layer so you only paint inside the pieces.
Ways to build the glass quality:
- Streaks and swirls: Paint soft lighter and darker variations of each color inside a piece, using a soft brush at low opacity. Real cathedral glass often has wavy gradients and wispy streaks.
- Noise and grain: In Adjustments, use Noise on a texture layer, then set the layer to Overlay or Soft Light at low opacity for a hammered or rippled feel.
- Blur: Gaussian Blur on a duplicate of a texture layer softens it so the texture feels embedded in the glass, not printed on top.
- Curves: Use Curves on a clipped adjustment layer to shift contrast and make some pieces more translucent, others denser.
Vary the treatment from piece to piece. If every piece has identical texture, the image feels like a filter instead of handcrafted glass.
Step 6: Lighting, glare, and glow
This is the step that makes it look like light is passing through the glass. Create a new layer set to Add (Linear Dodge) or Screen and paint soft highlights with an airbrush. Concentrate light along one direction, as if there is a single source behind the window.
Useful moves:
- Add small, sharp specular highlights on a few edges to suggest glossy glass.
- Use a soft glow layer around bright areas, then blur it. Procreate's Bloom effect in the Adjustments menu can add a gentle halo.
- Add a Multiply shadow layer near the lead lines to suggest depth between the came and the glass.
- Cast a faint colored light pattern on a floor or wall layer if you want the window to appear to illuminate a space.
Keep the effects subtle. If highlights bloom too broadly, the saturated color starts to wash out and the leaded structure loses clarity.
Step 7: Background and export
Replace the dark placeholder with a gradient sky, architectural frame, or simple black. Merge only the layers you are done with, and keep a duplicate of the layered file in case you need to revise.
Export choices for a motion pipeline:
- PSD keeps layers, blend modes, and groups, so it imports into After Effects as a composition with editable layers. Check that blend modes translated correctly, since Procreate has some modes that don't map exactly.
- PNG gives you a flat image with transparency if the background is hidden.
- Individual layers as separate PNGs are useful for parallax or light animation in Cinema 4D or Blender.
Taking the artwork into motion
A layered stained glass piece is a good source for animation because the structure is already separated. In After Effects, you can animate light by moving a mask or gradient on an Add-mode layer, or shift glow intensity with a slow expression-driven opacity wiggle. You can also use the lead layer as a matte for a light-bleed effect or displacement map. In Cinema 4D or Blender, extrude the lead line as geometry and place the colored glass as an emissive or transmissive material behind it.
For a retro, hand-built look, keep the movement simple: slow camera push, drifting light rays, small flickers of glow. Stained glass feels premium when the motion is restrained.
Where Styleframe fits
Procreate is the place to design the artwork itself. Styleframe is useful after that, when you want to extend it into moving footage or new views while keeping control over the look. It is an AI video and motion tool built around reference images, video clips, and keyframes rather than one-click generation.
A few practical uses for a stained glass project:
- Restyle and Ink-and-Paint: Use your finished Procreate window as the style reference and apply that look to a video clip or image. This is reference-driven style transfer, so the result follows your palette and line character rather than a generic prompt.
- Frames-to-Video: Set a start and end keyframe, for example the window in dim light and then fully lit, and generate the transition between them.
- 2D-to-3D and Turntable: Turn a flat illustrated element, such as an ornament, into a 3D asset and rotate it for a closer look at depth.
- Remove Background and 4K Upscale: Isolate a design from its backdrop, or bring a smaller piece up to production-ready 4K.
Iteration is non-destructive, so you can try different references and keyframes without losing earlier versions. Styleframe exports image sequences, which drop straight into After Effects or Nuke, and an After Effects plugin is on the way. Your compositing stays where it is. Generated shots are one more layer in your comp, graded and finished with your usual tools.
Common mistakes to avoid
- Over-detailing: If a shape could not be cut from real glass, simplify it.
- Inconsistent line weights: Mixed thickness reads as sketchy, not leaded.
- Gaps in outlines: Fill leaks are the most common time sink. Zoom in and check closures before filling.
- Flat color everywhere: Add at least subtle gradients and texture to each piece.
- Overdone glow: Too much bloom kills contrast and obscures the lead lines.
- Merging too early: Keep layers separate until the design is approved, especially if the artwork is headed for animation.
Follow these steps and you will have a layered, believable stained glass illustration ready for print or motion work, with a structure that holds up when you open it in your compositing tool.