How to Draw Square Procreate
StyleFrame Team8 min read
To draw a square in Procreate, sketch a four-sided shape with your Apple Pencil and hold at the end of the stroke until QuickShape snaps it into a clean quadrilateral. While the Pencil is still down, rest a second finger on the canvas to lock the shape into a perfect square. If it doesn't snap cleanly, tap Edit Shape in the top bar and choose the square option, or use the Drawing Guide for exact sizing.
Everything below is practical detail for getting reliable squares, fixing the cases where QuickShape fails, and moving those shapes into a motion workflow.
Method 1: QuickShape with the second-finger snap
This is the fastest route and the one most people want.
- Pick a brush and a solid color. A fine, fully opaque brush such as the fine tip brush from the Inking set works best.
- Draw four sides and close the shape, ending the stroke where you started.
- Don't lift the Pencil. Hold still for a moment until the stroke snaps into a straight-edged quadrilateral.
- With the Pencil still on the canvas, place a finger from your other hand on the screen. The shape snaps a second time, turning a rectangle into a true square.
- Lift the Pencil first, then your finger.
The two-stage snap is the part people miss. The first snap makes the shape geometric, and the second constrains it to equal sides. If you release too early, you get a rectangle that is close to square but not exact.
Scale and rotate before you release
While you're still holding, drag to scale and rotate the shape. Add a second finger while dragging and rotation moves in 15-degree increments, which makes it easy to land on exactly 45° for a diamond or return to 0° for an upright square.
Method 2: Use Edit Shape to convert to a square
If the finger-snap feels awkward, you can convert the shape after it snaps.
- Draw a rough square, close it, and hold until QuickShape engages.
- Lift off. An Edit Shape button appears in the notification bar at the top of the canvas.
- Tap it. The options shown depend on the shape you drew, and for a four-sided shape you'll find a square option.
- Tap the square option to correct the proportions.
- Adjust any corner by dragging its transform nodes, or drag the body of the shape to scale uniformly.
- Tap anywhere on the canvas to commit.
Edit Shape is slower than the finger-snap but more forgiving. It's also the better route when you want to nudge individual nodes afterward, such as when you want a nearly square panel with one deliberately skewed corner.
Method 3: Draw to an exact size with the Drawing Guide
QuickShape gives you a perfect ratio but not a specific pixel dimension. When the square has to match a layout, such as a 1080 × 1080 social frame or a grid of storyboard cells, use the Drawing Guide.
- Open Actions → Canvas and switch on Drawing Guide.
- Tap Edit Drawing Guide and adjust it to suit your layout. Lower the guide's opacity so it stays visible without competing with your linework.
- Draw your square along the guide lines.
This approach suits comic panels, UI-style layouts, and any case where several squares must be identical. You can pair it with QuickShape: draw on the grid, snap the shape, and the guide keeps your placement consistent.
Method 4: Build the square from straight lines
This slower method is useful when QuickShape refuses to cooperate or when you want full control over each edge.
- Draw a line and hold at the end until it snaps straight. Keep the second finger down if you want to constrain the angle.
- Lift off, then duplicate the layer.
- Rotate the duplicate by 90° using the magnetic increments, and position it so the ends meet.
- Merge, duplicate again, and repeat until all four sides are in place.
A related fix: if your snapped shape is open on one side, duplicate the layer, flip it horizontally, line up the halves, and merge down. It's a manual workaround, but it gets you a symmetrical result when the shape never fully closes.
Troubleshooting: when QuickShape won't make a square
Squares and rectangles can be hard for QuickShape to detect. Instead of a quadrilateral you may get a polyline or an ellipse. A few things help.
- Check your canvas and brush. Detection is known to be harder on very large canvases combined with small brushes, or with brushes set to lower opacity. Increase brush size, raise opacity to 100%, and try again.
- Close the shape deliberately. If the end of your stroke overshoots or falls short of the start, the shape reads as open. Aim to finish right at the starting corner.
- Draw with more confident corners. Rounded, hesitant corners push the recognition toward an ellipse. Make four distinct, fairly sharp turns.
- Review your gesture settings. Go to Actions → Prefs → Gesture Controls → QuickShape and confirm that Draw and Hold is enabled. You can also adjust other QuickShape touch and Pencil settings there.
- Switch methods. If detection fails repeatedly, fall back to Method 3 or 4 rather than fighting the gesture.
Filling and outlining your square
Because QuickShape works with whatever brush you're using, the result is a stroked outline, not a shape object. You can't currently apply a separate stroke to a shape after the fact, so decide on stroke weight before you draw. To fill the square, fill the enclosed area with your chosen color. For a filled shape with a different outline color, put the fill on its own layer beneath the outline.
If you need dozens of identical squares, draw one, then duplicate and move the layer rather than redrawing. Repeated QuickShape gestures can introduce small variations in size and position that you won't want in a grid.
Which method should you use?
Getting Procreate squares into a motion pipeline
Procreate is a raster app, so a square drawn there is pixels, not a vector. That has consequences for motion work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke.
- For clean geometric squares that need to scale or animate, build them natively. Shape layers in After Effects stay resolution-independent and animate cleanly. A perfectly straight Procreate square adds little there.
- For hand-drawn boards, panels, and style references, Procreate is the right place. Squares drawn there can serve as frame borders, panel layouts, mattes, or animatic elements with a sketched feel.
- Match the canvas to your comp. Create the Procreate canvas at your comp resolution, or at a multiple of it, so you aren't resampling later. Procreate canvas size also affects QuickShape reliability, so test at your target size before committing.
- Export with transparency where you need it. Hide the background color layer and export a PNG, or export a PSD to preserve layers for separation in After Effects.
- Keep line layers separate from fills. It makes recoloring, track mattes, and expression-driven changes much easier in compositing.
Where Styleframe fits after the drawing
Once your squares become part of a storyboard, a set of style frames, or hand-drawn key poses, the next problem is motion. Styleframe is an AI video and motion tool built for artistic control rather than one-click output, and it picks up from the stills you've made in Procreate.
A few practical ways it connects to this kind of work:
- Frames-to-Video. Use drawn frames as keyframes and let Styleframe generate the motion between them. Your Procreate boards define the start and end states instead of a text prompt guessing at them.
- Restyle and Ink-and-Paint. These are reference-driven style transfer tools. A frame with your hand-drawn linework can serve as the style reference, so footage or generated sequences pick up that look.
- 2D-to-3D and Turntable. If a drawn object, such as a box or a prop built from your squares, needs to be seen from other angles, these tools help extend a flat drawing into a rotating view.
- Remove Background and 4K Upscale. Useful for cleaning up scanned or exported art and delivering at production resolution.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can revisit a result without losing earlier versions. Output is production-ready 4K, and Styleframe exports image sequences that drop into After Effects or Nuke. An After Effects plugin is on the way. Your compositing workflow stays intact: Procreate for drawing, Styleframe for generating motion from your art, and After Effects or Nuke for the final composite.
Quick recap
- Draw four sides, hold until QuickShape snaps, then add a second finger for a perfect square.
- Use Edit Shape → square when you want a menu-based fix or node-level adjustments.
- Use the Drawing Guide when the square must match exact dimensions or sit on a grid.
- If QuickShape misreads your shape, increase brush size and opacity, close the stroke cleanly, check Gesture Controls, or build the square from straight lines.
- For animation, use native shape layers where you need clean geometry, and keep Procreate for hand-drawn work that benefits from its texture and imperfection.