How to Draw Smoke Procreate
StyleFrame Team8 min read
The quickest way to draw smoke in Procreate is to work in light grey or white on a dark canvas, build wisps on separate layers with a soft textured brush or a smoke stamp brush, and then shape them with Liquify and Gaussian Blur. Keep each plume on its own layer so you can move, rotate, and warp it independently. Finish by exporting a transparent PNG or layered PSD, or set the layers to Screen mode over a dark background. That gives you clean smoke elements you can animate or composite in After Effects.
Why Procreate Works for Smoke Elements
Procreate is not a compositing tool, but it is a fast way to get hand-shaped smoke that procedural generators tend to miss. Fractal noise and particle systems give you physically plausible turbulence. They struggle to produce a specific silhouette, such as a curl that wraps around a logo or a plume that follows a character's gesture.
Drawing the shape by hand gives you art-directed smoke. Those assets work well as:
- Stylized smoke for 2D and mixed-media animation
- Alpha mattes or displacement sources in After Effects
- Hero keyframes for look development
- Overlay textures for titles, lower thirds, and transitions
What You Need Before You Start
- Procreate on an iPad with an Apple Pencil
- A soft round brush and a textured brush (stock or imported)
- Optionally, a third-party smoke brush set. Many creators distribute
.brushor.brushsetfiles. Tap the file on your iPad to import it, or open the Brushes panel and use the import option.
Smoke brushes are usually stamp-style, so a single tap lays down a whole wisp. This is faster than painting by hand, but stamping without variation looks repetitive. The steps below are designed to avoid that.
Step 1: Set Up the Canvas
- Create a new canvas at the resolution you will need for delivery. For video, match your comp, such as 3840×2160 for UHD. Procreate limits the number of layers at larger sizes, so check the layer count for your canvas before you start.
- Fill the background layer with black. Select black, then drag the color swatch onto the canvas.
- Add a new layer above it for your first plume.
A black background matters because smoke is a luminance effect. Light on dark lets you judge density and edges the way they will read once you switch the layer to Screen or Add in your compositing app.
Step 2: Lay Down the Base Plumes
Pick a light grey rather than pure white. Pure white clips quickly and leaves no headroom for highlights.
- Select your smoke stamp brush or a textured soft brush.
- Stamp or paint a first wisp on its own layer.
- Add a new layer and stamp again at a different size and opacity.
- Use the Transform tool to rotate, flip, and stretch each layer so no two wisps read the same.
Work from large to small. Big, low-contrast shapes establish the body of the smoke. Smaller, sharper wisps near the source and at the edges sell the detail.
Vary the Direction
Real smoke rises, curls, and thins out as it moves away from the source. Rotate your stamps so the wisps follow one overall flow line. If you have a clear idea of the motion path, sketch it first on a separate layer as a guide, then delete it before export.
Step 3: Hand-Paint Wisps for Control
Stamps give you volume, but hand-painted strokes give you control. On a new layer:
- Choose a soft round brush at low opacity, around 10–20%.
- Draw long S-curves and spirals with light pressure, building density by overlapping strokes.
- Lower the brush size toward the tips so the smoke tapers instead of ending abruptly.
Use the Smudge tool with the same soft brush to drag edges into thin trails. Use the Eraser with a textured brush to carve holes into dense areas. Breaking up solid regions is what makes the plume read as vapor rather than a cloud shape.
Step 4: Shape the Smoke With Liquify
Liquify is the most useful tool for believable smoke, and it is non-destructive only if you duplicate the layer first.
- Duplicate the layer you want to modify.
- Open Adjustments, then Liquify.
- Use Push to drag edges along the flow line, and Twirl to create curls.
- Keep the brush size large and the pressure low. Small, aggressive pushes produce a melted look instead of smoke.
Apply Liquify to individual plume layers, not to a merged flattened image. That keeps each layer's motion independent, which helps later if you animate them separately.
Step 5: Soften and Blend
Smoke should rarely have a hard edge.
- Apply Gaussian Blur at a low percentage to layers that should sit further back. Slide your Pencil across the screen to increase the amount.
- Use Motion Blur on layers where you want directional streaking along the flow.
- Set key layers to Screen or Add so overlaps brighten naturally instead of stacking opaque grey.
- Reduce opacity on the back layers to create depth.
A useful structure is three depth groups: a dim, blurred background plume, a mid-density body, and a sharp foreground layer with fine wisps. Group them so you can export or hide each one separately.
Step 6: Color and Atmosphere
Grey smoke is often too flat for a finished shot. Add color on top of the layers instead of painting it in.
- Add a new layer above a plume and set Clipping Mask.
- Fill or paint with a warm color near a light source, or a cool one in shadow areas.
- Set the layer to Overlay, Soft Light, or Color.
Keep the original grey layers intact. If the shot changes, you can recolor in After Effects with Tint, Colorama, or a gradient map instead of repainting.
Step 7: Export for Motion Work
How you export depends on how you will use the smoke.
- Transparent PNG: Hide the black background layer and export. This gives you a flat smoke element with alpha. Because soft grey edges on transparency can look dirty when composited, test it against your actual background.
- Layered PSD: This opens in After Effects with layers preserved, so you can animate each plume separately. Make sure blend modes survive the import, and recheck them in the comp.
- Black background, no alpha: Export a flattened image and use Screen or Add in the comp to drop the black. This often gives the cleanest soft edges for smoke.
Animating Your Smoke
Procreate can animate frame by frame through Animation Assist, and its separate Procreate Dreams app is built for timeline animation. For hand-drawn smoke, you can step through a few frames on loop and export a sequence. Frame-by-frame smoke is time-consuming, so many artists draw a few strong key poses and move the rest of the work into compositing.
Moving Smoke in After Effects
If you export a layered PSD or a single smoke plate, these tools do most of the work:
- Turbulent Displace to add organic wobble without redrawing
- Fractal Noise as a displacement map to drive evolving motion
- CC Vector Blur or Motion Blur for directional smear
- Position, Scale, and Opacity keyframes on each plume layer to create rise and dissipation
- Time remapping to loop a short drawn sequence
In Cinema 4D or Blender, you can use the exported plates as textured cards or as density-mask inputs. In Nuke, they work as plates for roto-free overlays with Screen or Plus merges, and STMap or IDistort nodes can warp them.
Where Styleframe Fits
Drawing every frame of smoke is slow, and procedural smoke is hard to art-direct. Styleframe is an AI video and motion tool that may offer a middle path.
Two possible uses for smoke you've drawn in Procreate:
- Keyframes to video: Export two or three of your smoke drawings as keyframes, such as a tight plume at the start and a dispersed one at the end, and use a keyframe-driven tool to generate motion between them, so your drawn shapes define the look and the motion path.
- Style reference: Use your drawing as a style reference to carry its look onto other footage or renders, so your hand-drawn smoke style stays consistent across a shot.
Check Styleframe's current documentation for the features and export options available. Your Procreate drawing remains the creative source, and your comp remains where the final grade and integration happen.
Common Mistakes to Avoid
- Repeating the same stamp: Rotate, scale, and flip, and mix in hand-painted strokes.
- Using pure white: It clips fast and leaves no highlight range.
- Over-liquifying: Heavy pushes smear detail. Keep strokes light and large.
- Flattening too early: Keep plumes on separate layers until you are sure of the composition.
- Skipping the comp test: Smoke that looks good on black can look gray and muddy on a bright background. Always test the blend mode in the final context.
- Working at low resolution: Smoke is soft, but upscaling a small canvas introduces blur you cannot recover. Start at delivery size.
Quick Workflow Summary
- Create a canvas at delivery resolution with a black background.
- Stamp base plumes in light grey on separate layers.
- Hand-paint wisps and smudge edges for tapering detail.
- Use Liquify on duplicated layers to shape the flow.
- Blur back layers and set blend modes for depth.
- Add color through clipped layers instead of repainting.
- Export a PSD, transparent PNG, or black-background plate.
- Animate and composite in After Effects, Nuke, or a 3D package, or explore keyframe-driven tools such as Styleframe to generate motion between your keyframes.
Smoke drawn this way gives you a distinctive, controllable element. How much you animate by hand, procedurally, or with keyframe-driven tools depends on the shot's budget and style.