How to Draw Sky Procreate
StyleFrame Team9 min read
To draw a sky in Procreate, create a large landscape canvas, build a gradient base from two or three colors, then paint clouds on separate layers with soft and textured brushes. Add highlights, shadows, and atmospheric color on top with clipping masks and blend modes, and blend the edges with the Smudge tool. Keep every element on its own layer and the sky stays editable, and it can be exported for animation as well as illustration.
Set Up the Canvas for the Sky
Skies are large, smooth surfaces, so canvas decisions matter more than they do for a character sketch.
- Use a landscape canvas. If the sky will end up in a video, start at 3840 × 2160 or 16:9 at a size your iPad can handle. If you plan to pan across it later, make it wider than the frame.
- Watch your layer budget. Procreate limits the number of layers by canvas size and device memory. A huge canvas gives you fewer layers and can slow your iPad, so find a balance.
- Pick the color profile deliberately. If the artwork is going into a video timeline, sRGB is usually the safest choice. Display P3 can shift when it is brought into a standard video project.
- Sketch nothing yet. Skies rely on value and color shifts, not outlines. Skip the linework.
Step 1: Build the Gradient Base
A sky is a gradient before it is anything else. Real skies are usually deeper and more saturated at the zenith and lighter and warmer near the horizon.
Method A: Gaussian Blur gradient
- Create a new layer and fill the top half with your zenith color and the bottom half with your horizon color. Use ColorDrop or a large flat brush.
- Open Adjustments → Gaussian Blur and choose Layer.
- Drag your pen across the canvas to blur the seam until the transition is smooth.
This gives you precise control over where the transition happens. For a daytime sky, try a mid-saturation blue at the top and a pale cyan or warm cream near the horizon. For a sunset, use a cool blue-violet at the top, a magenta or peach in the middle, and a warm orange or yellow at the horizon.
Method B: Brush-built gradient
For a looser, more painterly result, skip the blur. Use a large soft or textured brush and lay down overlapping horizontal strokes of your colors, then blend them with the Smudge tool at low pressure. This keeps visible brush texture, which suits illustration better than a clean digital gradient.
Method C: Gradient Map
Procreate's Gradient Map adjustment can recolor a grayscale sky quickly. Paint the sky in values first, then map the darks, mids, and lights to your palette. It's useful for testing different moods without repainting, such as a dawn, a stormy afternoon, or dusk, all from the same value structure.
Step 2: Paint the Clouds
Put clouds on their own layers, separate from the gradient. That one habit makes every later correction easier.
Block in the shapes
Create a new layer and use a soft round brush or a cloud brush at low opacity to place rough masses. Think in large shapes first:
- Cumulus has flat bottoms and billowing tops.
- Stratus is long, low, and horizontal.
- Cirrus is thin, streaky, and high.
Don't draw outlines. Build volume with overlapping strokes and let some edges stay soft and others become firmer. A cloud with uniform edges looks like cotton wool, while a cloud with a mix of soft and defined edges looks like it has density.
Add depth with opacity and scale
Distant clouds should be smaller, flatter, lower in contrast, and closer to the horizon color. Foreground clouds are larger, brighter at the lit edge, and darker at the base. Placing these on separate layers lets you adjust each depth band on its own with the layer opacity slider.
Use texture selectively
Textured brushes, such as gouache, chalky, or "gloopy" paint brushes, are a quick way to add richness to large areas. Use them for the base color and mid-tones, then switch to a soft brush for the final blending. Too much texture across the whole sky can look noisy, so reserve it for areas you want the viewer to notice.
Step 3: Light, Shadow, and Atmosphere
This is the step that turns flat shapes into a believable sky.
Clip your lighting
Create a new layer above your cloud layer and turn it into a clipping mask. Anything painted on it stays inside the cloud shapes. Alpha Lock does the same job on the layer itself, but a clipping mask lets you undo or hide the lighting without touching the underlying paint.
- Highlights: Paint on the side facing the light source with a pale warm tone. At sunset, use peach or gold. At midday, use a warm white.
- Shadows: Paint the underside with a desaturated blue, purple, or gray. Avoid pure black or pure gray, which flatten the cloud.
- Rim light: For backlit clouds, a thin bright edge along the sun-facing side adds drama quickly.
Use blend modes for atmosphere
Create a new layer above everything and try these:
- Soft Light or Overlay with a warm color near the horizon to push the glow.
- Multiply with a deep blue-violet along the top to deepen the zenith.
- Add or Linear Dodge with a pale yellow for the area immediately around the sun, with the opacity lowered.
Keep these layers at low opacity, then raise them gradually. Skies fall apart when the lighting is pushed too hard.
Smudge sparingly
The Smudge tool is useful for pulling wisps out of a cloud edge or softening a harsh transition. Use a textured or soft brush as the smudge brush and keep the strength modest. Heavy smudging flattens the paint and erases the texture you just built.
Variation: Night Sky
A night sky follows the same structure with a different palette and a few extra layers.
- Gradient: Use deep navy or indigo at the top and a slightly lighter teal or violet near the horizon.
- Nebula or cloud wash: Use a large, soft, low-opacity brush in magenta, teal, or purple. Adjust the brush's spacing and jitter in Brush Studio so the dabs look more grainy and irregular.
- Stars: Create a layer and add stars with a small hard brush or a splatter brush. Vary size and brightness, because a few larger, brighter stars among many tiny ones reads as more natural than uniform dots.
- Glow: Duplicate the star layer, apply a Gaussian Blur, and set it to Add for a soft halo.
- Moon: Draw a circle with QuickShape, fill it, then use Alpha Lock to add a gradient or craters. Place a soft glow layer behind it.
Finish by adding silhouettes of hills or trees on a separate layer so the sky has something to sit behind.
Common Mistakes to Avoid
- Uniform saturation. Skies feel flat when the entire gradient has the same intensity. Let the saturation drop toward the horizon or the sun.
- Clouds that all look the same. Vary size, spacing, and softness.
- Pure black shadows. Use a tinted dark color pulled from the sky itself.
- Merging layers too early. Once the sky is flattened, changing the cloud position or the mood is much harder.
- Ignoring the horizon. A sky needs a reference to read properly, even a thin ground line or silhouette.
Taking a Procreate Sky into a Motion Pipeline
Many motion designers use Procreate for backgrounds, matte paintings, and style frames, then bring them into After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke. A few habits make that transfer smoother.
- Export layered files. Export as a PSD so the gradient, cloud bands, and lighting layers arrive separately in After Effects. You can then give each cloud layer a different parallax speed or animate the lighting layer's opacity for a slow shift in mood.
- Paint beyond the frame. Extend the sky past the visible area so moves and pans don't reveal empty edges.
- Watch for banding. Smooth gradients can band after video compression. Adding a subtle grain or noise layer, either in Procreate or in your compositing app, helps hide it.
- Keep a clean version. Save a copy without the foreground elements so you can reuse the sky behind different shots.
Where Styleframe can fit
A static sky is often only the first step. If you need the painted look to carry into moving footage, Styleframe (styleframe.ai) can be useful as an additional tool beside Procreate and your compositing app, not a replacement for either. You keep your compositing workflow and use any generation step only where it helps.
Quick Workflow Checklist
- Create a landscape canvas sized for your final output.
- Build a gradient base with the Gaussian Blur method or by hand.
- Paint clouds on separate layers, starting with big shapes.
- Separate near and distant clouds by scale, contrast, and color.
- Add highlights and shadows on clipping-mask layers.
- Use blend-mode layers for atmosphere and glow.
- Blend lightly, add grain, and keep layers unmerged.
- Export as PSD or PNG for compositing and animation.
FAQ
What is the best brush for painting a sky in Procreate? Start with a soft round brush for gradients and blending, and a textured brush for cloud bodies. Cloud brush packs can speed things up, but the built-in airbrush and painting sets are enough for a convincing sky.
How do I make a smooth gradient in Procreate? Fill two color blocks on a layer and apply Gaussian Blur to the layer. You can also use a Gradient Map on a grayscale layer.
How do I keep clouds from looking flat? Give them a light side and a shadow side, tint the shadows with a cool color, and vary edge softness. Painting distant clouds separately from near ones also adds depth.
Can I animate a sky I drew in Procreate? Yes. Export it as a layered PSD and animate the layers in After Effects, or use Procreate Dreams for simple animation. For more elaborate motion, you can use the painting as a reference or keyframe in an AI video tool.