How to Draw Pine Tree Silhouettes on Procreate
StyleFrame Team8 min read
To draw a pine tree silhouette in Procreate, build the shape from a straight trunk and stacked, jagged tiers that get wider toward the base. Use the Symmetry guide to keep the sides even, fill the shape with a single solid color, and vary heights and spacing so the trees don't look cloned. Keep each tree or tree group on its own layer, then export a transparent PNG or layered PSD so the silhouettes drop straight into After Effects for parallax, wind, and fog.
Why pine silhouettes work well for motion design
A silhouette removes interior detail, so the outline carries everything. Pines suit this because their shape reads instantly: a narrow vertical spine, drooping tiered branches, and a spiky top. That clarity matters in motion work, where a forest might sit behind titles, drift past a camera, or fill the lower third of a transition.
Silhouettes also composite well. A flat shape with a clean alpha channel takes blur, glow, color grading, and displacement without edge artifacts. Drawing them in Procreate gives you an organic, hand-made edge that vector-traced or stock shapes often lack, and you can make a whole forest from a handful of unique trees.
Set up the canvas
Start with a canvas larger than your delivery resolution. If the comp is 3840×2160, draw at least that size, and consider a wider canvas for a ridge of trees you'll pan across. Very large canvases can limit how many layers you can use, so check the layer count in Canvas > Canvas Information before committing to a very large file.
A few setup choices save time later:
- Use a plain light background. Dark silhouettes are easiest to judge against a pale background. You can hide it on export.
- Work in RGB. The default color profile is fine for most motion work, but confirm it matches your After Effects project's color management before you hand off files.
- Name your layers early. "Tree_A," "Tree_B," "Ridge_Back," and so on will carry into the PSD and make the After Effects comp much easier to organize.
Draw one pine tree step by step
1. Turn on the Symmetry guide
Open Actions > Canvas > Drawing Guide > Edit Drawing Guide, choose Symmetry, set it to vertical, and enable Assisted Drawing. Now every stroke on the left mirrors to the right, which gives you a balanced trunk and evenly weighted tiers. You can disable it later to add asymmetry.
2. Draw the trunk and center line
Use a solid brush with some stabilization. In the brush settings, raise Streamline so the line stays smooth. Draw a thin, tapered vertical stroke from base to tip. This is your spine, and you'll cover most of it, but it sets the height and proportions.
3. Block in the tiers
Pines are not smooth triangles. Draw a zigzag silhouette instead:
- Start at the tip and draw a short, narrow downward stroke outward.
- Step the edge inward slightly, then push out again, wider than the last tier.
- Repeat down the trunk, making each tier a bit wider and a bit more drooped.
- Leave a short bare trunk at the bottom.
Let the edge of each tier sag slightly rather than point straight out. Real pine branches droop under their own weight, and that curve is what separates a pine from a generic Christmas tree icon.
4. Fill the shape
Close the outline, then drag the color from the top-right color well into the shape to apply ColorDrop. If the fill leaves gaps at the edge, drag it again while holding on the shape and adjust the fill threshold at the top of the screen. Alternatively, use the Selection tool in Automatic or Freehand mode, fill the selection, and tidy any leftovers with a hard-edged eraser.
Use a very dark neutral rather than pure black. A deep blue-black or warm charcoal gives you room to grade later and avoids the crushed look pure black can have in compositing.
5. Break up the symmetry
Turn off the guide and add irregularity. Remove a branch on one side, add a short broken limb, nudge the top so it leans, and roughen the edges with a small hard brush. Symmetry is useful for the base shape, but a perfectly mirrored tree looks artificial once it repeats across a frame.
Build a forest from a few trees
Draw three to five distinct trees: one tall and thin, one wide and full, one with a broken top, one young and short. Then duplicate and transform them:
- Duplicate the layer, then use the Transform tool to scale, flip horizontally, and rotate slightly.
- Use Uniform scaling to avoid distorting the branch angles.
- Overlap trees so the bases merge into a continuous treeline, but keep clear gaps in places so the sky reads through.
Create depth with value layers
Separate the forest into at least three depth planes: foreground, midground, and background. Assign each plane its own layer or layer group.
- Foreground: largest trees, darkest value, sharpest edges.
- Midground: medium size, slightly lighter, a touch of softness.
- Background: small trees, lightest value, soft edges.
Use Alpha Lock on each layer to recolor it without touching the shape. Lifting the value of distant layers toward the sky color mimics atmospheric perspective, and you can fine-tune that in After Effects anyway. For the farthest ridge, apply a little Gaussian Blur from the Adjustments menu, or leave all blur for the compositing stage so it stays adjustable.
Add texture without losing the silhouette
Keep the silhouette solid, but you can add subtle edge character:
- Use a dry or textured brush along the lower edge of tiers for a needle-like fringe.
- Add a few small pinecone or needle-cluster dots, but only on the edge.
- Clip a grain or paper texture layer to the tree layer with a Clipping Mask at low opacity if you want a printed, screen-print look.
If you're unsure, leave the shapes flat. Texture can be added in compositing with noise, grain, or matte treatments, and that way it stays editable.
Export for After Effects and other tools
Layered PSD
Export as PSD from Actions > Share to preserve layers. In After Effects, import as Composition – Retain Layer Sizes so each depth plane arrives as its own layer, ready for 3D layer toggling and camera moves.
Transparent PNG
For single assets, hide the Background Color layer in the Layers panel and export PNG. The transparency is preserved. In Nuke, treat the PNG as premultiplied if the edges look dark or fringed, and check this in the Read node. In Blender and Cinema 4D, map the PNG to a plane and use the alpha channel for transparency, then space planes along the Z axis for a cheap but convincing 3D forest.
Quick checks before you leave Procreate
- Zoom to 100% and look for stray pixels around the edges.
- Confirm trees on different depth planes are on different layers.
- Keep a copy of the layered .procreate file in case you need to redraw or reposition later.
Animate the silhouettes in After Effects
Once the layers are in, the silhouette style makes several techniques easy:
- Parallax: turn on 3D for the layers, add a camera, and spread the planes along Z. A slow dolly or pan sells depth with almost no extra work.
- Wind sway: apply the Puppet Pin tool to a trunk and tip, or use Turbulent Displace at low amounts for a subtle wobble. Offset the evolution per layer so the trees don't move in sync.
- Fog and light: place a soft gradient or Fractal Noise layer between depth planes, with a blend mode like Screen or Add, to get layered mist.
- Color grading: use Curves or Tint on an adjustment layer to push the whole set toward dusk, night, or dawn without redrawing anything.
Where Styleframe fits in this workflow
Hand-drawn silhouettes give you full control of shape, but you may want to extend them into moving or restyled footage. Styleframe is an AI video and motion tool that can sit beside a Procreate-to-After Effects pipeline.
A few practical ideas:
- Transitions between your own frames: use your own silhouette frames as references, for example a forest at dusk and the same forest under heavy fog, and generate the in-between from those references rather than from a text prompt alone.
- Restyling: apply a reference-driven look, such as a woodcut or watercolor treatment, to footage or frames so they match the silhouette art you drew.
Check Styleframe's current documentation for the features and export options available. You keep your compositing setup and use Styleframe for the parts of the shot that benefit from generation.
Common mistakes to avoid
- Perfect triangles. Add droop, gaps, and uneven tiers.
- Identical copies. Flip, scale, and mix several base trees.
- One flat layer. Splitting depth planes is what makes parallax possible later.
- Pure black everywhere. Slightly varied dark values read as depth and grade better.
- Low-resolution canvases. Drawing small and scaling up softens the crisp edges that make silhouettes work.
Final checklist
- Large canvas, named layers.
- One tree drawn with the Symmetry guide, then broken up by hand.
- Three to five tree variations duplicated into a treeline.
- Foreground, midground, and background on separate layers.
- Exported as layered PSD or transparent PNG.
- Imported into After Effects with layer sizes retained, then animated with a camera, displacement, and fog.
Once the drawing process is repeatable, a full forest takes less time than hunting for stock assets, and you end up with shapes that are entirely yours.