How to Draw Ocean Waves on Procreate
StyleFrame Team8 min read
To draw ocean waves in Procreate, start with a landscape canvas and sketch the wave's S-curve on its own layer. Block in flat blue-green values underneath, then add shadow, foam, and highlights on separate layers using clipping masks and a textured brush. Keep each element on its own layer so the artwork can also be animated, either in Procreate's Animation Assist or by exporting a layered PSD to After Effects.
Set Up the Canvas for Waves
Waves are wide, horizontal subjects, so use a landscape canvas. If the final piece will end up in a video timeline, match your delivery format from the start. A 3840×2160 canvas gives you a UHD frame, while 3000×2000 works well for a standalone illustration. Large canvases with many layers can be demanding on your device, so plan your layer count before committing to a large format.
A few setup decisions save time later:
- Color profile: Choose a profile that matches your pipeline. If the piece goes to After Effects or Premiere Pro, sRGB is the safest default for predictable color.
- Layer groups: Create groups for Sky, Background Swell, Main Wave, Foam, and Highlights before you begin painting.
- Reference: Pull in two or three photos of the wave type you want. A breaking barrel, a rolling open-ocean swell, and shoreline foam all behave differently.
Step 1: Choose the Wave Type and Plan the Shape
Before drawing, decide what kind of water you are painting. This determines the silhouette more than any brush choice does.
- Rolling swell: Long, low, rounded forms with gentle crests and little foam.
- Breaking wave: A steep face, a lip that curls forward, and heavy foam at the crest and base.
- Shore wash: Thin sheets of water that spread, retreat, and leave lace-like foam edges.
For a first attempt, a breaking wave teaches the most, because it contains the curve, the thin translucent lip, and the foam. Use the QuickShape or StreamLine features sparingly. Waves read as natural when the line has slight irregularity.
Step 2: Sketch the Wave Structure
On a new layer, use a pencil or dry-ink brush at low opacity and draw the main S-curve of the wave. The back of the wave rises gradually, the crest peaks and curls forward, and the face drops steeply to the trough.
Build the sketch in three passes:
- Gesture line: One flowing curve that captures direction and energy.
- Volume: Add the thickness of the lip and the slope of the face. Water has mass, so avoid drawing the wave as a thin ribbon.
- Secondary waves: Sketch smaller swells behind the main wave. Their crests should roughly follow the same direction, with varied spacing, so the surface does not look patterned.
Lower the sketch layer's opacity once the structure feels right. You will paint underneath it rather than tracing every line.
Step 3: Block In Color and Value
Create a new layer under the sketch and fill the main wave shape with a mid-tone. Ocean color is rarely just blue. A believable palette usually includes:
- Deep teal or navy for the base of the wave and the distant water.
- A saturated green-blue where light passes through the thin lip.
- Pale aqua near the crest, where water is thinnest.
- Warm grey or soft violet in shadowed foam.
Turn on Alpha Lock or use a clipping mask for shading layers so you can paint freely without leaving the wave silhouette. Use a soft airbrush to push darker values toward the trough and lighter values toward the crest. The goal is a clear value gradient. If you desaturate the canvas and the wave still reads as a three-dimensional form, the color blocking works.
Add Shadow and Translucency
Make a clipping mask above the base color and set it to Multiply. Paint a darker blue beneath the lip and along the lower face. Then, on another clipped layer set to Add or Screen, paint a thin band of lighter turquoise just inside the crest edge to suggest light passing through the water. This translucency is what separates a convincing wave from a flat blue shape.
Step 4: Paint the Foam and Spray
Foam is where waves tend to look either alive or fake. Make a new layer above your color layers and use a textured brush, such as a chalk, stipple, or grain brush, in off-white rather than pure white.
- Crest foam: Drag short, irregular strokes along the lip, thickest at the top and thinning as they move down the face.
- Base foam: Where the wave collapses, build up a cluster of overlapping, uneven shapes.
- Trailing foam: Streaks of thin foam running down the wave face show the direction water is moving.
- Spray: Flick small dots with a speckle or splatter brush. Vary dot size, and keep most of them close to the crest with only a few drifting farther away.
Use the Eraser with the same textured brush to carve holes into foam clusters. Real foam has gaps, and those gaps reveal the water underneath.
Add a subtle shadow layer under the foam in a cool grey-blue. Foam sits on the surface and has its own volume, so it should cast a small shadow.
Step 5: Highlights, Reflections, and Final Adjustments
Add a final layer for highlights. Place the brightest accents where the light source hits the wave: the tip of the crest, a few ridges on the face, and the edge of foam clusters. Keep them sparse. Too many highlights flatten the form.
Then refine:
- Use the Smudge tool at low strength to soften harsh transitions, particularly where foam meets water.
- Use Liquify lightly to nudge the crest curve if the silhouette feels stiff.
- Apply Color Balance or a Gradient Map adjustment layer to unify the palette.
- Add a faint atmospheric haze on the distant waves so they recede from the foreground.
Step back and view the canvas at a small size. If the wave's shape, light, and foam are still readable as a thumbnail, the composition holds up.
Organize Layers for Animation or Compositing
If you plan to move the waves in video, treat the painting as a set of animation assets. Name and separate layers:
- Background water and distant swells
- Main wave body
- Shadow and translucency layers
- Foam (crest, base, trailing)
- Spray particles
- Highlights
- Sky and horizon
Export as a layered PSD for After Effects, or export PNGs with transparency for individual elements. Painting slightly beyond the visible frame on background layers gives you room to move, scale, or distort them later without exposing empty edges.
Animate Procreate Waves
Procreate's Animation Assist lets you create frame-by-frame loops directly on the canvas. For waves, this works for a short stylized cycle such as a hand-drawn crest curling over in a small number of frames. It is a good fit for traditional-style animation, but it is labor-intensive for long, complex water.
For more control, move the layers into After Effects:
- Parallax: Offset background swells and foreground wave layers on different speeds for depth.
- Displacement: Use Turbulent Displace or a Displacement Map on the water layers for ripple and surface motion.
- Looping motion: Apply the Wiggle expression or Offset effect to create repeating drift on foam and swell layers.
- Foam variation: Animate layer masks or use Fractal Noise as a track matte so foam appears to build and dissolve.
This approach keeps the painted look while giving you the usual compositing tools: color correction, blur, motion tracking, and render control.
Where Styleframe Fits in a Painted-Wave Workflow
Hand-animating every in-between frame of a breaking wave is where many artists stall. Styleframe is an AI video and motion tool that some artists may find useful for bridging Procreate stills to motion. For example, you could use painted waves as reference frames or style references so that generated motion follows your palette and brushwork. Check the tool's current documentation for the specific features, output formats, and integrations available, and then bring the results into your usual compositing workflow, where you can grade, mask, and layer them like any other footage.
Common Mistakes When Drawing Ocean Waves
- Uniform shapes: Repeating the same curve across a row of waves looks artificial. Vary height, spacing, and angle.
- Pure white foam: Use off-white, cool grey, and pale aqua to give foam dimension.
- Flat color: Without value changes and translucency, the wave reads as a graphic shape rather than water.
- Ignoring direction: Foam streaks, ripples, and highlights should all follow the wave's movement.
- Merging everything early: Flattening layers removes your ability to animate or revise. Keep the structure until the piece is final.
Final Thoughts
A convincing Procreate wave comes from structure first: a strong S-curve, a clear value gradient, translucent light near the crest, and irregular foam. Build it in separate layers, and you can finish it as a still, animate it frame by frame, or send it to After Effects for compositing. For longer or more complex motion, AI video tools like Styleframe may help generate movement from your painted stills while you keep control of the look.