How to Draw Mountains Procreate
StyleFrame Team9 min read
To draw mountains in Procreate, start with a flat sky gradient, then build the range as separate layers of angular silhouettes, lightest and farthest first, darkest and nearest last. Give each layer a lighter, cooler, lower-contrast value than the one in front of it to create atmospheric depth. Then add lit and shadowed planes with a clipping mask, finish with texture, snow, and mist, and export the layers as a PSD so you can animate them in After Effects.
Set Up the Canvas for Motion Work
If the artwork is headed for a timeline, set up the canvas for video rather than print. Create a custom canvas at your delivery resolution, such as 3840 × 2160 for UHD or 1920 × 1080 for HD. Keep your layer count in mind when choosing canvas size, since a larger canvas may limit how many layers you can use. If you plan to push camera moves in After Effects, paint wider than the frame. A canvas that is somewhat wider than your comp gives you room for parallax moves without revealing empty edges.
Work in a color profile you can carry into your compositor. Check the color profile in your canvas settings when you create a custom canvas. Pick one and stay consistent. Mismatched profiles are a common reason a painting looks different once it lands in a comp.
Name your layers as you go. "Sky," "Range 1 far," "Range 2 mid," and "Foreground ridge" will save time when you separate them for animation.
Plan Depth Before You Draw
Mountains read as large because of depth cues, not because of detailed rock. Three cues do most of the work:
- Atmospheric perspective: distant ridges are lighter, bluer or grayer, and softer in contrast.
- Overlap: each range partially hides the one behind it.
- Scale and detail shift: near ranges carry sharper edges and more texture, while far ones stay simple.
Decide on a palette of four or five values before you start. A typical dusk scheme might use a pale peach near the horizon, a dusty lavender for the farthest range, and progressively deeper blue-greens toward the foreground. Sample these into a Procreate palette so you can pick them quickly.
Step 1: Paint the Sky Gradient
Make a new layer called "Sky" and fill it with your lightest horizon color. Use a soft airbrush to push a darker or more saturated color from the top of the canvas downward. Keep strokes wide and overlapping. For a smoother transition, apply Gaussian Blur from the Adjustments menu at a low amount and use Layer mode so the effect applies only to that layer.
Leave the sky mostly clean. Clouds and haze can come later, once the mountains define the composition.
Step 2: Block In the Farthest Range
Create a new layer above the sky. Using a hard-edged brush with some opacity control, such as a basic inking or flat brush, draw a ridgeline across the canvas. Avoid smooth curves. Real mountain silhouettes are made of irregular, mostly angular segments: a steep rise, a short plateau, a sharp peak, a long shoulder that slopes away.
Some tips for convincing ridgelines:
- Vary the length and angle of each segment. Repeating the same slope looks artificial.
- Place one or two dominant peaks and let the rest support them.
- Keep peaks off dead center. Asymmetry feels more natural.
- Use QuickShape sparingly. Holding your stroke at the end can snap a line straight, which helps for planar facets, but too many perfect lines flatten the organic feel.
Once the outline is closed, drag the color swatch into the shape to fill it (Color Drop). Pick a color only slightly darker than the sky at the horizon. The farthest range should barely separate from the background.
Step 3: Stack Additional Ranges
Add a new layer for each range, moving down the canvas and toward the viewer. For each one:
- Draw a new ridgeline that overlaps the previous one, with more variation and larger shapes.
- Fill it with a color that is darker and a bit more saturated than the range behind it.
- Let the lower edges extend past the bottom of the canvas, or below where the next range will cover them. This matters later if you animate, because overlapping pixels let layers move independently without gaps.
Three to five ranges are usually enough. More layers add depth, but they also add management overhead.
Step 4: Add Planes of Light and Shadow
This is the step that turns flat silhouettes into mountains. For each range, add a new layer above it and turn on Clipping Mask so paint stays inside the shape below. Alternatively, lock the base layer with Alpha Lock and paint directly.
Choose a single light direction, such as light from the upper left, and apply it consistently:
- On the lit side of each peak, paint angular shapes in a lighter value. Follow the direction of the ridges, starting from the peak and running down along the slope.
- On the shadow side, use a darker, cooler tone.
- Break up the transition with a few triangular or wedge-shaped facets rather than soft gradients. Hard edges suggest rock. Soft edges suggest haze or snow.
For distant ranges, keep this step minimal. A single large light plane and a single shadow plane are enough. For the nearest range, add more planes and secondary ridges that run down the slopes like folds in fabric.
Step 5: Texture the Rock
Texture should increase as mountains get closer. Use a dry or chalky brush, a charcoal brush, or a textured rock brush from the default sets or a third-party pack, and keep these habits:
- Paint texture on a clipped layer so you can adjust opacity or erase without damaging the base shape.
- Follow the form. Strokes should run along slopes, not across them.
- Use Multiply for shadow texture and Add or Overlay for highlight texture, with low opacity.
- Stop earlier than you think you should. Over-texturing is a common reason mountains look muddy.
A quick option is to use the Selection tool with Feather to isolate a shape, then paint or smudge inside the selection to keep edges crisp while the interior stays soft.
Step 6: Paint Snow Caps
Snow is mostly negative space and value contrast. Create a clipped layer above your nearest or mid-range peaks and paint the snow with a near-white that is slightly tinted by your sky color. Pure white often looks pasted on.
Place snow where it would naturally collect:
- On upper slopes and flatter ledges.
- Along ridge tops, with jagged lower edges that follow the rock's structure.
- Less on steep faces, which shed snow.
Add a shadow tone to snow on the side facing away from the light, usually a pale blue or lavender. This single detail does a lot to sell the form.
Step 7: Add Mist, Clouds, and Foreground
Atmospheric haze ties the ranges together. Create a new layer between two ranges and paint a soft horizontal band of the horizon color with a large airbrush at low opacity. Repeat between other ranges, adjusting the intensity. Because each haze layer lives between mountain layers, it will be easy to animate drifting fog later.
For the foreground, add a dark band of hills, trees, or rocks. Simple silhouettes are fine. Pine trees can be drawn as a series of narrow triangles with a custom or default brush, then duplicated and scaled for variation. Keep the foreground the darkest, most contrasting element so the eye reads the range receding behind it.
Finish with a few clouds in the sky, using a soft brush and a smudge tool for edges, and adjust the overall color with Curves or Color Balance.
Common Mistakes to Avoid
- Too much symmetry: peaks that mirror each other look like triangles, not mountains.
- Uniform contrast: if all ranges have the same value range, depth collapses.
- Pure black shadows: tinted, cooler darks look more natural and sit better in a color-graded comp.
- Soft brushes everywhere: hard edges for rock and soft edges for haze make a clear visual distinction.
- Merging layers too early: keep separate layers until you have exported, because flattened art cannot easily be animated.
Export Layers for After Effects
Procreate can export a layered PSD through the Share menu. Check that your layer count and blend modes survive the trip. Some Procreate blend modes and effects may not translate exactly, so open the PSD in After Effects or Photoshop and compare it to your Procreate canvas.
In After Effects, import the file as a Composition with Retain Layer Sizes, or as a Composition if you want everything at canvas size. Then:
- Enable 3D on each layer and space them along the Z axis for true parallax with a camera, or use scale-compensated position moves for a 2.5D look.
- Animate the haze layers with slow horizontal drift.
- Add a subtle Turbulent Displace or a Fractal Noise-based effect for moving clouds, and use a light wrap or glow to tie the layers together.
- Grade the whole scene with an adjustment layer rather than baking changes into the paint.
If you plan to take the scene into Cinema 4D or Blender, export the layers as separate PNGs with transparency and place them on planes, or use them as textures on simple displaced geometry.
Where Styleframe Fits After the Painting
A Procreate mountain scene often works as a styleframe, a locked look that a larger piece must follow. Styleframe (styleframe.ai) is an AI video and motion tool that you may want to explore for extending a painted landscape into motion.
Final Checklist
Before you export or hand off, check that:
- Each mountain range, haze band, and foreground element is on its own named layer.
- Values get lighter and cooler as ranges recede.
- Light direction is consistent across all planes and snow.
- Layers extend beyond their visible edges so they can move without gaps.
- The canvas is large enough for your intended camera move.
Mountains are an ideal Procreate subject because the process is repeatable: silhouette, depth, planes of light, texture, atmosphere. Once you build the habit of painting in separated layers, the same artwork can serve as a standalone illustration, a parallax shot in After Effects, or a style anchor for the rest of a motion project.