How to Draw Mirror Image in Procreate
StyleFrame Team8 min read
To draw a mirror image in Procreate, open Actions (wrench) → Canvas, turn on Drawing Guide, tap Edit Drawing Guide, choose Symmetry, and pick Vertical, Horizontal, Quadrant, or Radial under Options. Then tap Done and draw on a layer with Drawing Assist enabled, and every stroke is reflected in real time across the guide line. If you only need to mirror artwork you've already finished, duplicate the layer, open Transform, and tap Flip Horizontal or Flip Vertical.
Which one you use depends on whether you're drawing from scratch or reflecting something that already exists.
Method 1: Draw with the Symmetry guide
The Symmetry guide is the right choice for work in progress: character halves, logos, ornamental patterns, hard-surface concepts, and mandala-style textures.
Step 1: Turn on the Drawing Guide
- Tap Actions (the wrench icon).
- Go to Canvas.
- Toggle Drawing Guide on.
- Tap Edit Drawing Guide.
This opens the Drawing Guides screen. By default you'll see a grid, so the symmetry options are one tap away.
Step 2: Choose Symmetry and a mode
Tap Symmetry at the bottom of the screen. A vertical guide appears down the middle of the canvas. Tap Options to switch modes:
- Vertical: whatever you draw on the left appears on the right, and vice versa. This is the usual choice for faces, characters, and front-view designs.
- Horizontal: the canvas mirrors top to bottom. It suits reflections in water or glass, and it's awkward for anything you'd normally draw upright unless you rotate the canvas or your hand.
- Quadrant: vertical and horizontal guides combine, so a stroke in one quadrant repeats in the other three. Useful for tiles and icon patterns.
- Radial: the canvas splits into eight segments with diagonal guides, and a stroke in one segment repeats in all the others. Good for mandalas, snowflakes, and kaleidoscope-style graphics.
Step 3: Mirrored vs. Rotational
New guides use Mirror Symmetry, which reflects and flips your strokes across the line. Toggle Rotational Symmetry and the copies are rotated instead, which means they're flipped both horizontally and vertically at once. For a face or a symmetrical logo, stay with Mirror. For spinning, pinwheel-like patterns, Rotational is what you want.
Step 4: Position the guide
Two nodes control the guide:
- The blue node moves the whole guide across the canvas.
- The green node rotates the guide lines.
This matters because your mirror axis doesn't have to sit in the center or run straight up and down. You can angle it to build a diagonal reflection, or shift it off-center to mirror just one part of a composition. To go back to the default position, tap a node and then tap Reset.
You can also adjust the guide's color, opacity, and thickness on the same screen. Lowering the opacity keeps the line visible without competing with your linework.
Step 5: Tap Done and make sure the layer is "Assisted"
Tap Done to commit the guide. Then check your layer. Symmetry only applies to layers with Drawing Assist turned on, and those layers show the word "Assisted" under their name. If you draw and nothing mirrors, this is almost always the cause. Tap the layer and switch on Drawing Assist.
This is also useful on purpose. You can keep a symmetrical base on an assisted layer and put asymmetrical details, such as a scar, a hairline, or an off-center prop, on a normal layer above it.
Method 2: Flip a finished drawing
Symmetry works while you draw. When you already have artwork and want a mirrored version, flipping is faster.
- In the Layers panel, swipe left on the layer and tap Duplicate.
- With the duplicate selected, tap the Transform tool (the arrow icon).
- In the bottom toolbar, tap Flip Horizontal (or Flip Vertical).
- Drag the flipped copy into position. Turn on Snapping if you want it to align cleanly with the original.
- Deselect Transform, then merge the layers if you want a single piece of artwork.
For a half-drawn character, a common approach is to draw one half, duplicate and flip it, then merge. For a reflection (a figure standing over a glossy floor), flip vertically instead, then lower the opacity of the copy and add a gradient mask.
Which method should you use?
Make the mirror look less mechanical
Perfect symmetry is useful for construction, but it often reads as artificial in finished work, especially on organic subjects like faces. A few habits help:
- Build the base symmetrically, then break it. Sketch and block in with Symmetry on, then merge or switch to a normal layer and add small asymmetries in the eyes, hair, clothing folds, and lighting.
- Use Liquify on one side. After flipping a duplicate, nudge shapes slightly so the two halves don't match pixel for pixel.
- Offset the axis. Move the blue node a little off-center when you want a stronger composition than a dead-center split.
- Check the result flipped. Mirror your canvas view or flip the whole image to catch proportion errors your eye has adapted to.
Getting mirrored artwork into your motion pipeline
If you're drawing in Procreate to feed After Effects, Premiere Pro, Blender, Cinema 4D, or Nuke, a few export habits prevent headaches:
- Export as PSD if you want layers, which makes it easier to animate the left and right halves independently. That's handy for a character blink or a radial pattern where each ring rotates at a different speed.
- Export as PNG if you need a single flat asset with transparency. Hide the background color layer first if you want the background to be transparent.
- Draw at the final resolution you need. Symmetry doesn't change resolution, but upscaling a mandala later will soften fine linework.
- Keep your symmetry elements on separate layers, such as outline, fill, and highlights. It makes recoloring and parallax setups much easier downstream.
Where Styleframe fits after the drawing
Procreate is where you build the mirrored design. Styleframe, an AI video and motion tool built for artistic control, is useful once you want to take that artwork into motion or stylize it without redrawing it.
A symmetrical drawing makes a clean reference. In Styleframe, every generation is driven by your own reference images, video clips, and keyframes, so the mirrored design you made stays the source of truth rather than being replaced by a guess. Some practical uses:
- Frames-to-Video: use two or more Procreate frames as keyframes (for example, a closed and an open version of a symmetrical emblem) and generate the motion between them.
- Restyle and Ink-and-Paint: apply a reference-driven style to your mirrored artwork, such as turning clean vector-like linework into a hand-inked look, while keeping the composition you designed.
- 2D-to-3D and Turntable: take a symmetrical character or object from flat drawing to a 3D-style view and rotate it, which is a natural fit because symmetrical designs have fewer ambiguous sides for the model to interpret.
- Remove Background and 4K Upscale: isolate the artwork from its canvas and bring the final output up to production-ready 4K.
Iteration is non-destructive, so you can try several variations of the same Procreate source without losing earlier versions. Styleframe exports image sequences, which drop straight into After Effects or Nuke, so your compositing, color, and finishing workflow stays the same. An After Effects plugin is on the way as well.
Troubleshooting common problems
Nothing mirrors when I draw. Check that Drawing Guide is on and that the active layer has Drawing Assist enabled. New layers don't always inherit it.
The mirror line is in the wrong place. Reopen Edit Drawing Guide, drag the blue node to reposition, or tap a node and choose Reset.
My strokes snap or straighten unexpectedly. Drawing Assist adjusts strokes to follow the guide direction, and it's on by default in Symmetry mode. Turn it off per layer if you want fully freehand marks.
The flipped copy doesn't line up. Turn on Snapping before you drag.
I need to stop mirroring for one part of the drawing. Switch to a layer without Drawing Assist, or turn the Drawing Guide off in the Canvas menu, and your strokes go back to normal.
Quick recap
- For drawing in real time: Actions → Canvas → Drawing Guide → Edit Drawing Guide → Symmetry → Options → Done, then draw on an Assisted layer.
- For existing art: duplicate the layer, Transform, Flip Horizontal or Vertical, then position and merge.
- Use Vertical for characters, Radial for mandalas, Quadrant for tiles, and Rotational for pinwheel effects.
- Export as PSD or PNG, and take the artwork into After Effects or Nuke, or into Styleframe if you want to turn it into motion or restyle it from your own references.