How to Draw Lips Procreate
StyleFrame Team9 min read
To draw lips in Procreate, build the form first and add detail last. Block in the mouth as a few simple shapes (a midline, a top lip split into two or three "beans," and a fuller bottom lip), fill them with a mid-tone base on its own layer, then shade, highlight, and add lip lines on clipped layers above. Working in separate layers keeps every step editable, which matters if the drawing is headed for animation.
Before You Start: Set Up the Canvas
Open a canvas large enough to survive a crop and a push-in. If the artwork will land in a video timeline, work at or above your final comp resolution. 3840 × 2160 is a sensible floor for a 4K deliverable, and a lip study is often a detail you'll scale up later.
Pick a reference before you draw. A photo of the mouth angle you actually need (front, three-quarter, side, open, smiling) will teach you more than a generic tutorial. Import it onto its own layer, lower the opacity, and draw over it on a new layer above. This is the fastest way to learn where the shapes go, and you can hide the reference when you're done.
Keep your layers organized from the start. A workable stack, from bottom to top:
- Reference (hidden at the end)
- Sketch/structure
- Base color
- Shadow
- Light/highlight
- Lip lines and details
- Optional skin or background
Step 1: Build the Structure
Lips look wrong most often because the proportions are off, not because the rendering is weak. Fix that at the sketch stage.
- Draw the midline. This is the seam where the lips meet. On a closed, neutral mouth it's a gentle curve, usually dipping slightly at the center and at the corners. Everything else hangs off it.
- Mark the corners. Place small points at each end of the midline. The corners tuck back into the cheek, so don't end them in sharp, flat points.
- Block the top lip. Think of it as two rounded shapes on either side of a center notch (the cupid's bow), tapering toward the corners. Many artists simplify this to a "bean" on each side.
- Block the bottom lip. It's usually one fuller, softer shape, often a single wide bean sitting below the midline. It's generally a bit fuller than the top lip, though this varies by person.
- Check the angle. In a three-quarter view, the far side compresses and the near side opens up. In profile, the lips are stacked forms that protrude off the face rather than flat shapes, so think of them as volume, not outline.
Use a light pencil-type brush (6B Pencil or similar from the Sketching set) at low opacity. Keep your lines loose and correct them freely. Undo with a two-finger tap and nudge shapes with the Transform tool when the proportions drift.
Practice the structure from several angles before you commit to a finished piece. Ten fast structure sketches will do more for you than one overworked render.
Step 2: Lay Down a Flat Base Color
Create a new layer under your sketch and fill the lip shape with a mid-tone. Use ColorDrop (drag the color from the top-right swatch into the closed shape) or paint it in with a hard-edged brush.
A few tips:
- Don't pick pure red. Lips are usually a shifted version of the surrounding skin tone: more saturated, a little darker, often warmer or cooler depending on the person. Sample the skin color and push it.
- Keep the base slightly desaturated. You'll add saturation back with shading, and it's easier to push color up than to pull it down.
- Turn on Alpha Lock (two-finger swipe right on the layer) so any painting stays inside the shape. Alternatively, use a Clipping Mask on layers above for a non-destructive version.
I recommend clipping masks over Alpha Lock when you expect to revise, because you can delete or swap a shading layer without touching the base.
Step 3: Shade the Form
Create a new layer above the base, set it as a Clipping Mask, and consider setting its blend mode to Multiply. Paint shadows with a darker, more saturated version of your base. A slightly cool or warm shift often looks richer than just darkening.
Where the shadows go:
- Under the top lip. The upper lip typically overhangs and sits in shadow, so it's often darker than the lower lip.
- The corners of the mouth. Deepen them to anchor the lips in the face.
- Under the bottom lip. A soft cast shadow on the chin side makes the lower lip look like it protrudes.
- Along the midline. This is the darkest, thinnest accent.
Use a soft airbrush (Soft Brush from the Airbrushing set) for gradual transitions and a harder round brush where you want a defined edge. Many artists keep separate color palettes for light and dark areas, so shadows don't drift toward muddy gray.
Step 4: Add Light and Highlights
On another clipped layer (Normal, Add, or Overlay depending on the look), paint light on the planes facing your light source. For lips, that usually means:
- The upper curve of the bottom lip, where the form catches light.
- The peaks of the cupid's bow.
- A soft secondary light on the top lip's front plane, subtler than on the bottom.
For a glossy lip, add a crisp, slightly curved highlight that follows the form, plus a softer glow around it. For a matte lip, keep highlights broad and low-contrast. Resist the urge to paint one bright white dot. Gloss reads best when the reflection wraps around the volume and breaks where the surface changes direction.
Step 5: Draw the Lip Lines and Texture
Real lips have fine vertical creases, especially on the lower lip. These are best added last and kept subtle.
- Use a textured brush (many artists use a fine-tip ink brush or a custom grain brush) on a new layer.
- Paint short, slightly curved strokes that follow the form, not straight vertical lines.
- Lower the layer opacity until the lines read as texture, not stripes.
- Break up the lines with an eraser so they fade at the edges.
For line art, a pressure-sensitive pen brush such as Studio Pen or Technical Pen from the Inking set works well. Vary the line weight: heavier on the midline and corners, lighter on the outer edges. Many illustrators drop outlines altogether in a rendered style and let value changes define the shapes.
Drawing Open, Talking, and Yelling Mouths
A common question is how to draw lips when the mouth is moving. The key is that the structure changes, not just the pose:
- Open mouth: the midline becomes an opening. The top lip stretches upward and flattens, the bottom lip drops and stretches. Add the inner mouth: teeth under the top lip, tongue in the lower shape, and a dark cavity behind.
- Smiling: the corners pull outward and up, the midline curves, and the lips thin as they stretch.
- Pursed or "oo": the lips compress into a rounded, protruding form with radial creases.
- Yelling: a wide open shape, with the lips pulled thin around it and visible tension at the corners.
Reference photos are essential here. Sketch the shape of the opening first, then wrap the lips around it.
Taking Procreate Lips Into a Motion Pipeline
If you're an animator or motion designer, a lip drawing is rarely the end product. A few habits make the artwork far more useful downstream.
Keep parts separate. Put the upper lip, lower lip, teeth, tongue, and mouth interior on distinct layers. That lets you rig a mouth in After Effects with puppet pins or shape swaps, or build a set of mouth shapes for dialogue.
Draw a mouth chart. For lip sync, create a small set of mouth poses (closed, open, wide, rounded, and so on) at a consistent scale and position. Consistent registration makes swapping between them in a timeline much easier.
Export deliberately. Procreate can export layered PSD files, which After Effects imports as a composition with layers intact. Check that blend modes and clipping masks survive the trip, and flatten or merge anything that doesn't. Export PNGs with transparency when you only need isolated elements.
Use Procreate's Animation Assist for rough tests. It's useful for a quick flipbook-style check of timing before you build the final version in your compositing app.
Where Styleframe Fits After the Drawing
Once you have a lip design you like, the next question is often how to extend it: a stylized mouth moving through a shot, restyled in the look of a different reference, or turned into a consistent asset. Styleframe (styleframe.ai) is an AI video and motion tool built for artists who want control over the result rather than a one-click black box. A few of its tools map directly onto this kind of work:
- Frames-to-Video is keyframe-driven. You supply the start and end frames, for example your closed-mouth and open-mouth drawings, and guide the motion between them.
- Restyle and Ink-and-Paint use reference images to transfer a look, so you can push a Procreate study toward a specific illustrated style while the drawing stays the source.
- Remove Background isolates your artwork cleanly for compositing.
- 4K Upscale brings the output up to production resolution.
- 2D-to-3D and Turntable can help if you want to explore a stylized face or mouth form from other angles.
Generations are driven by your reference images, clips, and keyframes. Export formats and compositing integrations can change, so check Styleframe's current documentation for what is supported.
As with any generative step, check results frame by frame. Mouths are one of the places viewers notice errors fastest, so expect to review, adjust keyframes, and composite the final pass yourself.
Common Mistakes to Avoid
- Outlining everything in black. It flattens the form. Use colored or varied lines, or drop them.
- Making both lips identical. Subtle asymmetry looks more natural.
- Skipping the corners. Without defined corners, the lips float on the face.
- Overdoing highlights. A glossy look needs restraint and edge variation.
- Working flat. Painting everything on one layer makes every correction destructive.
- Ignoring the rest of the face. Lips read correctly only in relation to the nose, chin, and cheeks. Check them in context.
A Simple Practice Routine
- Draw ten structure sketches from different angles over a reference, 2 to 3 minutes each.
- Pick two and render them fully using the layer stack above.
- Repeat with an open and a smiling mouth.
- Build a small mouth chart and import it into After Effects to test a short line of dialogue.
Procreate gives you a forgiving, layer-based space to learn lip anatomy. Master the structure and keep your layers clean, and the same drawing will serve illustration, animation, and compositing alike.