How to Draw Lineart in Procreate
StyleFrame Team9 min read
To draw lineart in Procreate, sketch roughly on one layer in a light color, drop that layer's opacity to a few percent, and ink on a new layer above it with a stabilized pen such as Studio Pen. Pull long, confident strokes and vary line weight: thicker on outer edges and foreground overlaps, thinner on interior detail. Work on a large canvas (3000 x 3000 px at 300 DPI is a reliable default) so your lines stay crisp when you scale them later in After Effects or any compositor.
Set Up the Canvas Before You Draw
Most lineart problems start before the first stroke. Pixelated, wobbly lines usually trace back to a canvas that was too small or a brush that wasn't configured for the job.
- Canvas size: 3000 x 3000 px at 300 DPI gives you room to zoom in for detail work without making the file unwieldy. If the lineart is destined for video, match your delivery aspect ratio from the start so you don't have to crop or rescale later.
- Layer structure: Keep sketch, lineart, and color on separate layers. You'll want to hide or lock the sketch, and you'll want the lines isolated if you plan to composite them.
- Reference window: Use Procreate's reference feature to keep a view of the whole piece open while you're zoomed in. It's easy to lose the overall shape when you're working on a small section.
- Gesture shortcuts: Under Preferences > Gesture controls, set up Quick Menu and Layer Select so you can move between layers without hunting through the panel. Small time-savers add up over a long inking session.
If you work on an iPad with a stylus, turn on palm rejection and consider a drawing glove. Friction between your hand and the glass is a surprisingly common cause of shaky lines.
Build a Sketch That's Worth Inking
Your lineart can only be as good as the sketch beneath it. Resolve the hard decisions at the sketch stage: anatomy, perspective, hands, overlaps, the way a braid or fold of fabric travels. If the sketch is full of vague gray areas, you'll end up redesigning while you ink, and the lines will hesitate.
Keep the sketch loose but accurate. Capture gesture and energy there so the finished lines inherit that liveliness. A useful rule is to get all your guesswork out in the sketch so the inking pass is about execution, not problem-solving.
Draw the sketch in a light color such as blue or red rather than black. It separates visually from your final lines, which makes it easier to judge what you've actually inked.
Ink Over the Sketch (Without Just Tracing It)
The common failure mode is tracing every sketch stroke so literally that the lineart looks stiff once the sketch is hidden. A few habits help:
- Drop the sketch opacity very low. Somewhere between 3% and 15% is enough. You should be able to barely see it. This forces you to draw the line with intent rather than copy it.
- Change the sketch color. A contrasting hue (a pale blue under black lines) keeps the two from blurring together.
- Lock the sketch layer. Procreate makes it easy to accidentally draw on the wrong layer. Locking prevents it.
- Create a new layer for the lines. Put it above the sketch, and consider a separate layer per major element (character, props, background) if the piece will be animated or composited.
Because you can barely see the guide, you'll sometimes need to zoom out and check your work against it. That's where the reference window earns its keep.
Choose and Tune Your Brush
For clean digital lineart, start with Studio Pen from the Inking set. It's smooth, predictable, and responds well to pressure. If you prefer a textured, more traditional look, the Chalk brush in the Calligraphy set is one artist's favorite for lineart, used with its default settings. If you do edit a brush, duplicate it first so you keep the original.
Two settings matter most:
- StreamLine: This smooths out wobble by correcting your stroke path. Higher values give cleaner curves but can make it harder to draw tight, accurate shapes. Switch back to a lower setting (or a different brush) for hair, hatching, and small circles.
- Pressure response: Make sure pressure controls line thickness, so a lighter touch produces a finer line and heavier pressure thickens it. This is what gives you the classic tapered stroke.
Don't over-tune. Pick one or two brushes you trust and learn how they behave.
Draw Strokes That Look Confident
Technique matters more than tools here.
- Pull, don't push. Draw toward your body with a gliding motion. Pushing a stroke away from you gives you less control.
- Use your shoulder and elbow for long curves, and your wrist for short ones. Rotate the canvas so the line you're drawing is always in your most comfortable arc.
- Draw long strokes and accept the occasional overlap. A single long, slightly imperfect line almost always looks better than a chain of short segments stitched together.
- Use QuickShape for straight lines. Draw a line and hold at the end; Procreate snaps it straight. Keep your finger on the screen to constrain it further.
- Undo freely. Redrawing a bad stroke is faster than trying to fix it.
Control Line Weight
Line weight is what separates flat outlines from lineart that reads as designed. A few practical principles:
- Thicker outer contour, thinner interior detail. The silhouette gets the heavier line; folds, textures, and small features get lighter ones.
- Foreground over background. When two shapes overlap, the line on the front shape should be thicker than the one behind.
- Add weight where shapes meet. A slight thickening at intersections and in shadowed areas grounds the drawing.
- Taper curves deliberately. Lines that are thin at the ends and heavier in the middle feel energetic. Reverse it (thick, thin, thick) for a more stretched feel. Try both and see which fits your style.
For animation, consistency matters more than variety. If the lineart will be redrawn across many frames, pick a small set of line widths and stick to them.
Clean Up and Refine
Once the inking is done, hide the sketch and look at the lines alone. Then:
- Erase stray marks and overshoots with a hard eraser at a small size.
- Close gaps in outlines if you plan to fill with a bucket tool; open gaps cause color to leak.
- Use Selection or Liquify sparingly to correct proportions, and check that distortion doesn't thin out your lines.
- Step back and view the whole piece at a small size. Lineart that reads at thumbnail scale will hold up at full resolution.
Turn a Photo Into Line Art (As a Reference Base)
Sometimes you need a quick line base from a photograph, perhaps as a construction reference. A common approach in Procreate:
- Insert the photo (Actions > Add > Insert a photo).
- Duplicate the layer and desaturate it (Adjustments > Hue, Saturation, Brightness, with saturation at zero).
- Duplicate again, then either invert the colors with Curves and set the blend mode to Color Dodge, or set the duplicate to Divide.
- Apply a Gaussian Blur to the top layer until edges appear. Adjust the amount to taste; a few percent is often enough.
- Merge the two layers, then use Curves to push the contrast so the background goes white and lines go dark.
If your lines look like a high-contrast photo rather than a drawing, the blur amount or blend mode is usually the culprit. Treat the result as a base to redraw over, not a finished piece. Auto-generated edges tend to be noisy and have uniform weight.
To color it, set the lineart layer to Multiply and place your color layers beneath.
Export for a Motion Pipeline
If your lineart is headed into After Effects, Premiere Pro, Nuke, or a 3D tool, a few export habits will save you trouble:
- Hide the background layer and export in a format that supports transparency, such as PNG.
- Export layers separately when you need to animate elements independently. Check Procreate's export options for a layered format your compositor can import.
- Keep a flattened reference alongside the layered export for checking your composite against the original.
- For frame-by-frame work, consider Procreate's animation tools, and check which export formats are available for your pipeline.
Where Styleframe Fits After the Lineart Is Done
Procreate handles the drawing. The harder question for motion work is often what happens next: how to get a hand-drawn look to move, shift styles, or become a shot, without redrawing every frame. That's where Styleframe can sit beside your existing tools.
Styleframe is an AI video and motion tool built around artistic control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes, so the lineart you drew stays the source of truth. A few ways it can connect to a Procreate workflow:
- Frames-to-Video: Draw your start and end keyframes in Procreate, then use keyframe-driven Frames-to-Video to generate the motion between them, rather than inbetweening every frame by hand.
- Restyle and Ink-and-Paint: These are reference-driven style transfer tools. Use your own lineart or a painted frame as the style reference to push footage or renders toward that look.
- 2D-to-3D and Turntable: Explore a drawn character or object from other angles when you need a quick spin or a 3D starting point.
- Remove Background and 4K Upscale: Isolate your subject for compositing, and deliver production-ready 4K output.
Iteration is non-destructive, so you can try variations without losing earlier results. Styleframe exports image sequences and works alongside After Effects and Nuke, with an After Effects plugin on the way, so compositing stays where you already do it. As with any generative tool, results depend on your inputs, so test with a short clip before committing a full sequence.
Quick Checklist
- Canvas at 300 DPI, sized for your final delivery
- Sketch in a light color, resolved before inking
- Sketch layer at 3 to 15% opacity and locked
- Studio Pen (or another pen) with moderate StreamLine
- Long pulled strokes, deliberate line weight
- Clean-up pass, then check at thumbnail size
- Transparent PNG or a layered format for compositing
Lineart improves mostly through repetition. Pick one drawing, ink it twice with different line-weight choices, and compare. The difference will teach you more than any setting.