How to Draw Justice League Movie in Procreate
StyleFrame Team8 min read
To draw a Justice League movie scene in Procreate, build the composition from loose gesture shapes, add construction lines for each hero, then ink and color on separate layers. Work on a large canvas with a reference image open in Reference Companion, and keep each character's linework, color, and lighting on its own layers. If the art is going into motion, organize the file so it exports cleanly as a layered PSD for After Effects.
Before You Draw: Reference, Scope, and Canvas Setup
The Justice League film (2017, plus the 2021 Snyder Cut) gives you a clear visual vocabulary: Batman's armored tactical suit and cowl with goggles, Superman's glowing eyes, Wonder Woman's armor, Aquaman's trident and scaled gear, Cyborg's mechanical plating, and the Flash's lightning-trimmed suit. Decide at the start whether you are drawing a single hero or the full ensemble. A group shot is a composition problem first and a rendering problem second.
Collect stills, posters, and costume reference before you open Procreate. Use Procreate's Reference Companion to keep a still visible while you work, so you aren't flipping between apps. Treat the reference as information on costume design and lighting, not something to trace. Fan art for a portfolio or personal study is common practice, but the characters belong to their rights holders, so keep it noncommercial unless you have permission.
Canvas settings for motion work
If this art will feed an animation or a comp, set up the canvas for that from the start:
- Aspect ratio: Match your delivery format. A 16:9 canvas works for title cards and styleframes, though the maximum layer count depends on your iPad's memory at that size.
- Color profile: Pick one profile (sRGB is the safe default for screen delivery) and stay with it, so colors don't shift when you bring the file into After Effects.
- Resolution plan: If your device can't hold many layers at full size, work at a smaller size for sketching and rebuild at final size, or accept fewer, more carefully merged layers.
Step 1: Block Out the Composition with Gesture Shapes
Start on a low-opacity sketch layer with a hard round or pencil-style brush. Rather than drawing faces, place the heads as circles and decide where each character sits in the frame. A classic team shot puts the central figure highest and angles the rest in a loose V or arc, so the eye travels from the focal hero outward.
Tips for the blockout:
- Mark the head circles first. They set scale, hierarchy, and spacing. Stagger them vertically so the group doesn't read as a flat lineup.
- Add a center line to each head to show which way the face is turned. Tilt it for dynamic poses.
- Run shoulder and hip lines to set the action. Opposing angles between shoulders and hips give instant movement.
- Use simple volumes such as ovals for torsos and tubes for arms and legs. They don't need to be perfect, only proportionate and consistent.
Lock in the overall silhouette at this stage. If the shapes read clearly as solid black fills, the final piece will read well too.
Step 2: Construct Each Character
Lower the opacity of the blockout, make a new layer, and refine each hero. Work one character at a time, with each on a separate layer group.
Drawing Batman
Batman is a good test of construction habits. Divide the head with an eye line and a centerline, then add a temple line. Place the cowl's ears at the top of the head shape, then bring the cowl down and out toward the jawline. In the film version, the goggles sit up on the forehead, so mark their position early and place the eyes just under them, with the brow set in a slight frown. The cowl follows the shape of the face, so keep the nose and mouth lines simple. Break the torso into chest and waist sections, then add the armor plating on top of the form.
Drawing the rest of the team
- Superman: Keep the proportions heroic, with broad shoulders and a strong chest. Plan for deep tones with highlights carrying the form.
- Wonder Woman: Use the armor pieces to define the torso. The shield and sword help build a strong diagonal.
- Aquaman: Emphasize bulk and texture in the upper body, and draw the trident as a long, clean vertical or diagonal.
- Cyborg: Split the figure into organic and mechanical zones. Plan the mechanical panels with shape layers or QuickShape for clean geometry.
- The Flash: Use a lean, forward-leaning pose and leave room around the figure for speed lines and light effects.
Use Procreate's tools to speed this up
- Drawing Guide with 2D Grid or Perspective helps keep the group and environment consistent.
- QuickShape gives you clean circles, ellipses, and lines for armor details and weapons.
- Symmetry helps with frontal elements, such as Batman's chest emblem or Cyborg's face plate. Turn it off for anything organic or in motion.
- Stabilization (Streamline) on your brush gives smoother linework for long contour lines.
Step 3: Clean Linework and Flat Colors
Create a new layer above your construction layers and ink over the best lines. Vary your line weight: thicker lines on the outer silhouette and in shadowed areas, thinner lines for interior detail. Once the inks are done, hide the sketch layers.
For color:
- Create a flat-color layer under the linework for each character, and fill base colors with ColorDrop or a hard brush.
- Use Alpha Lock or Clipping Masks so shading and highlights stay inside the base shapes.
- Set a restricted palette per hero. Batman gets charcoal and cool grays, Superman deep blue with warm skin tones, Wonder Woman red, gold, and blue, Aquaman orange and teal, Cyborg metallic grays with an electric accent, the Flash red with yellow.
- Pick a unifying light source so characters feel part of the same scene, such as a warm rim from one side and a cool fill from the other.
Step 4: Shading, Lighting, and Effects
Create a Multiply layer clipped to each color layer for shadows, and an Add or Overlay layer for highlights. Keep the light direction consistent. Then add the movie-style touches:
- Atmosphere: A low-opacity gradient or soft airbrush behind the figures creates depth. Smoke, debris, or haze helps unify the group.
- Glow effects: Superman's eyes, Cyborg's lights, and the Flash's lightning work well on separate Add-mode layers. The Glow and Bloom adjustments in Procreate's Adjustments menu can push them further, but keep them on separate layers so they stay editable.
- Color grading: Use Color Balance or Curves on a merged copy to test a teal-and-orange look or a desaturated look before committing. Keep the ungraded version in the file.
Keep your layers organized. Name each group by character and function (for example "BATMAN_line," "BATMAN_color," "BATMAN_light," "FX_glow") so the structure survives the trip to other software.
Step 5: Prepare the File for Motion
Procreate artwork is often a starting point for motion designers, such as a title card, a concept styleframe, or a character that needs to move. A few habits make that handoff easier:
- Export as a layered PSD for After Effects. Check that blend modes carried over, since some Procreate modes and adjustments may not match one-to-one, and be ready to rebuild a few effects in the comp.
- Keep characters on separate layers from backgrounds so you can add parallax, camera moves, or depth-of-field in the comp.
- Paint behind overlaps. If a character's arm crosses the torso, extend the torso underneath it so there are no holes if the arm moves.
- Export a flattened PNG for reference, and keep a transparent-background version of each character.
- Use Animation Assist for quick frame-by-frame tests, such as a flickering energy effect or a short Flash trail, before you commit to a full animation pipeline.
Where Styleframe Fits After the Drawing
Once you have a set of hand-drawn key poses, the question becomes how to get them moving without losing your drawing style. AI video and motion tools such as Styleframe are one option for exploring motion from your key poses. Check the tool's current feature list and export options before building a workflow around it.
Your compositing workflow stays the same: Procreate for the drawing, a motion tool for exploration and style consistency, and After Effects or Nuke for the final comp.
As always, review AI-generated motion carefully. Characters with complex costumes can drift between frames, so treat the results as material to direct and refine, not as finished shots.
Common Mistakes to Avoid
- Skipping construction. Jumping straight to detailed armor or cowls without a solid gesture and proportion base leads to stiff or off-model figures.
- Merging too early. Flattening layers before you've tested the lighting and color makes revisions painful.
- Over-rendering the background. In an ensemble piece, the heroes should stay the focus, so keep contrast and detail highest around them.
- Inconsistent lighting. If each hero is lit from a different direction, the group won't feel like one scene.
- Ignoring handoff. If the art is headed for animation, plan the layer structure and overlaps at the start, not at export.
Final Checklist
- Reference loaded in Reference Companion
- Canvas sized and color profile set
- Gesture blockout with a clear focal hero
- Construction and inking per character on separate layers
- Flat colors under line, with clipped shading and highlight layers
- Unified light source and restricted palettes
- Glow and FX on their own layers
- Layers named and the PSD tested in After Effects
Follow this process and a Justice League piece in Procreate becomes something more useful than a single illustration: a structured, layered asset you can iterate on, animate, and composite.