How to Draw in Procreate Step by Step
StyleFrame Team8 min read
To draw in Procreate, create a canvas at 300 DPI in sRGB, block in your shapes with a sketch layer, refine with line art on a separate layer, fill flat color, add shading, and export as PNG or PSD. The whole method is a layered workflow, so every stage stays editable. For motion designers, the useful result is a set of clean, layer-separated frames or style references that can move into After Effects, Nuke, or an AI motion tool such as Styleframe.
Before you draw: set up the canvas
Most beginner frustration traces back to a bad canvas, so spend a minute here.
- In the Gallery, tap the + icon in the top corner.
- Choose a preset, or tap the custom canvas icon to enter your own dimensions.
- Set DPI to 300 if there's any chance you'll print the piece. For screen-only work, pixel dimensions matter more than DPI.
- Leave the color profile on sRGB unless you have a color-managed reason to change it.
- Check the maximum layer count shown for your canvas. It depends on canvas size and iPad model, so a huge canvas gives you fewer layers.
If the drawing will end up in video, match your composition's aspect ratio now. A 16:9 canvas at 3840 × 2160 saves you from cropping and rescaling later. Name the canvas with its dimensions so you can find the right template again.
Step 1: Learn the gestures that save time
Procreate is built around touch shortcuts, and a few of them change how fast you work:
- Two-finger tap undoes. Three-finger tap redoes.
- Hold two fingers to undo repeatedly. Hold three to redo repeatedly.
- Pinch to zoom and twist to rotate the canvas, just like turning paper.
- The two sliders on the left edge control brush size (top) and opacity (bottom).
Rotating the canvas is the one that matters most. Drawing a clean curve is far easier when your hand moves in its natural arc.
Step 2: Choose a brush and test it
Open the brush library and try a few stock brushes before committing. Draw a line, a shaded patch, and a quick stroke with varied pressure. Pencil-style brushes respond to tilt, so using the side of the Apple Pencil produces shading rather than a line. Others scale with pressure.
For a first drawing, a small set is enough:
- A sketching pencil for rough construction
- A monoline or studio pen for clean line art
- A soft or medium airbrush for gradients and shading
- A hard-edged brush for flat fills
You can download third-party brush packs later. Stock brushes are enough to learn the process.
Step 3: Sketch on its own layer
Open the Layers panel, add a new layer, and name it "Sketch." Work loose and light. Use a low-opacity pencil and think in basic shapes, such as circles, boxes, and cylinders, before you think in details.
A few habits help:
- Use a reference. Procreate's split-view and image-insert tools let you keep a reference next to the canvas. Copying structure from reference is a legitimate way to build skill, not a shortcut to apologize for.
- Fix proportions first. Details can't rescue a wrong silhouette.
- Think about composition. The rule of thirds is a simple default. Put your focal point near one of the intersections rather than dead center.
When the sketch reads clearly, lower the layer's opacity to roughly 20–30% so it becomes a guide rather than a competitor.
Step 4: Ink the line art on a new layer
Create a new layer above the sketch, name it "Line," and trace your cleaned-up shapes with the pen brush. Use confident, continuous strokes instead of many short, scratchy ones.
If you're building something symmetrical, such as a character face, an emblem, or a mandala, turn on the Symmetry guide through the Drawing Guide settings. Strokes mirror automatically.
Keep line art on its own layer. Later you'll want to recolor it, hide it, or export it separately.
Step 5: Fill flat color underneath
Add a new layer below the line art and name it "Color." Pick a base color, then either:
- Drag the color circle into a closed shape to fill it, or
- Paint with a hard brush inside the lines.
If a fill leaks, close the gap in your line art. For a more organized file, put each major element (skin, clothing, background) on its own layer. It takes a few extra seconds now and saves large amounts of time when a client asks for a different color.
Choose a limited palette. Four to six colors with deliberate contrast look more professional than a dozen unrelated ones. You can build and save a palette in the Color panel so it's available in every future project.
Step 6: Use Alpha Lock and clipping masks for shading
This is the step where drawings start to look finished. You have two non-destructive options for painting inside shapes:
- Alpha Lock: Lock a layer's transparency. Anything you paint stays inside the existing pixels.
- Clipping mask: Add a layer above your color layer and choose Clipping Mask. Painting on it only appears where the layer beneath has content.
Clipping masks are generally safer because shading lives on a separate layer you can erase, adjust, or delete without touching the base color.
Pick a single light source and commit to it. Add shadow shapes on one side with a darker, slightly more saturated version of your base color, then place a few highlights on the opposite side. Soft airbrush works for rounded forms. A hard brush gives a flatter, graphic look.
Step 7: Refine with adjustments and effects
Open the Adjustments menu (the magic wand icon) for global tweaks:
- Hue, Saturation, Brightness to shift color relationships
- Curves for contrast and tonal control
- Gaussian Blur for soft backgrounds and depth
- Noise or Grain to add texture and reduce a digital look
Apply these to individual layers rather than flattening the file. A slightly blurred background layer and a crisp subject layer make the image feel dimensional in a way no single brush can.
Step 8: Export for the next stage
Tap the Actions menu (wrench icon), choose Share, and pick a format:
- PSD keeps layers, which is the best choice if you'll rebuild the piece in After Effects or Photoshop.
- PNG preserves transparency for individual elements.
- JPEG is fine for quick previews, but avoid it for production assets.
- Animated formats and video are available through Animation Assist, covered below.
If a design is destined for motion work, export a flattened version for review and a layered file for production.
Using Procreate in a motion pipeline
Procreate is a drawing tool, not a motion tool, but it fits motion work in three practical ways.
Animation Assist. Procreate includes Animation Assist, a frame-by-frame animation mode. It suits short loops, quick motion tests, and rough animatics. It isn't a replacement for a compositing environment.
Layered PSD to After Effects. Draw characters or props with separated limbs, eyes, and shadows, then import the PSD into After Effects as a composition with layers intact. From there you can rig with the Puppet tool, parent layers, and animate with expressions. Separate your layers deliberately as you draw, because retrofitting separation later is tedious.
Style frames and boards. For pitch work, Procreate is fast for painting style frames, color scripts, and storyboard panels you'd otherwise build in Photoshop or by hand.
Where Styleframe fits after the drawing
Once you have a few finished drawings, you can use them as controlled inputs for , an AI video and motion tool built around artistic control rather than one-click generation. The practical hand-off looks like this:
- Frames-to-Video: Export two or more Procreate frames as start and end keyframes, and Styleframe generates the motion between them. Because you drew the keyframes, composition, character design, and color stay yours.
- Restyle and Ink-and-Paint: Use a finished drawing as the style reference and apply its look to other footage or images. Both are reference-driven style transfer, so your hand-drawn style leads the result instead of a text prompt.
- Remove Background: Pull a subject cleanly off its canvas when you need a standalone element.
- 2D-to-3D and Turntable: Turn a character or prop drawing into a 3D-style asset or a rotating view, useful for checking design consistency across angles.
Each generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try a variation without losing the earlier one. Output can be exported as image sequences, which drop straight into After Effects or Nuke for compositing, grading, and finishing.
This isn't a substitute for learning to draw. The better your keyframes and style references are, the more predictable the result.
Common mistakes to avoid
- Drawing everything on one layer. You lose the ability to fix anything cleanly.
- Skipping the sketch. Jumping straight to line art locks in early proportion errors.
- Using too many colors. A restrained palette looks more intentional.
- Ignoring canvas size. Too small and you can't upscale cleanly. Too large and you run out of layers.
- Flattening too early. Keep a layered master file until the client signs off.
A simple practice routine
Pick one small subject, such as a mug, a plant, or a simple character. Run through the full process: canvas, sketch, line, flat color, clipped shading, adjustments, export. Repeat it with a new subject each day for a week. By the end you'll have the sequence memorized, and the habits that matter in production, such as clean layer naming, deliberate palettes, and a consistent light source, will be automatic.
Procreate's own Beginners Series is a good companion for the interface, while the steps above give you the structure for a complete drawing you can actually use in a motion project.