How to Draw Graffiti on Procreate
StyleFrame Team8 min read
To draw graffiti on Procreate, sketch your letters on a low-opacity layer, build the shapes with flat edges and angled arrows, ink a clean outline on a new layer, then add fills, shadows, details, and a background on separate layers. Use a pencil brush for the sketch and a stabilized inking pen for the final lines so curves and angles stay smooth. Keep every stage on its own layer, and the piece is easy to revise now and easy to animate later.
What you need before you start
You need an iPad, an Apple Pencil, and Procreate. Everything else is optional. Graffiti-specific brush packs help, but the default Inking and Sketching sets are enough for a complete piece.
If you want a ready-made set, free graffiti brush packs exist in the Procreate community. Brush sets use the .brushset extension and need a reasonably recent version of Procreate. Import them from inside the Brushes panel rather than from the Gallery, or open the file directly from the Files app. If a download arrives as a zip, unzip it on a computer first, then move the .brushset file to your iPad through iCloud Drive.
Set up the canvas and brushes
A square canvas is a comfortable starting point for a single word or a full alphabet. One popular tutorial uses 2048 × 2048 px in sRGB, and that works well for practice pieces. If the piece will end up in a video timeline, go larger. A 4K-wide canvas means you won't have to upscale for a UHD comp. Plan your layer structure before you commit to the dimensions.
Use three brushes to begin:
- A pencil for sketching. The 6B Pencil from the Sketching set works well at a large size with reduced strength, around 40%.
- A stabilized inking pen. Duplicate the Studio Pen from the Inking set, open its settings, and raise StreamLine to the maximum. Set stabilization to about 50%. This trades a little responsiveness for much smoother curves and cleaner angles.
- A solid, hard-edged brush for fills. Any flat brush with consistent opacity will do. Some artists use a dedicated solid brush from a lettering pack.
Duplicate brushes before editing them so you keep the defaults intact.
Step 1: Sketch the letter skeletons
Start with the bare structure of the word. Draw each letter as a simple stick-figure skeleton, with a long stroke for the main spine and a slightly tilted crossbar if the letter has one. At this stage you're deciding on rhythm, spacing, and overall slant.
Draw the sketch on its own layer, then lower its opacity to roughly 15%. Create a new layer on top and redraw over it, this time thickening the strokes and adding the shape of the letter body. Repeat this once or twice. Each pass tightens the form, and you can delete or hide the previous layer once it has served its purpose. Merge layers down when a pass is finished so you aren't managing dozens of sketch layers.
This "sketch on sketch" approach is slower than going straight to ink, but it helps you get balanced letterforms.
Step 2: Build the letter structure
Plain skeletons become graffiti when you start exaggerating them. On the new layer, try these moves:
- Flat, angled ends. Instead of rounded terminals, cut the ends of strokes at deliberate angles. Vary the angle between letters so the word feels hand-cut rather than mechanical.
- Arrow-like tips. Extend a stroke into a pointed, arrow-shaped end and connect it back into the neighboring letter.
- Extensions and cuts. Push a top or bottom edge a little further than the letter needs, then cut back in. These small overshoots give the piece its energy.
- Connected letters. Let strokes overlap or join so the word reads as one unit rather than separate characters.
- Thicker weight. Bulk up the strokes so there is room for fills, highlights, and shadows later.
Keep reviewing the whole word instead of perfecting one letter at a time. Graffiti legibility comes from consistent weight, spacing, and angle across the piece.
Step 3: Ink a clean outline
Create a new layer above your sketch and switch to the stabilized Studio Pen. Zoom in so each stroke is a deliberate, confident pull rather than a series of corrections. Draw the outline in black. Work in long strokes where possible, and where a curve fails, undo and redraw it rather than patching it.
Tips for clean lines:
- Draw with your whole arm and use short strokes for tight corners.
- Rotate the canvas so your stroke always travels in your most natural direction.
- Keep the sketch layer visible at low opacity underneath, then hide it once the outline is complete.
- Use the Selection or Transform tool to nudge a single letter if the spacing is off. Do this before you start filling.
Keep the outline on its own layer. Everything you add later should sit beneath or above it without touching it.
Step 4: Fill the letters
Add a light gray or neutral background layer first. A neutral base makes it easier to judge your color choices than a pure white canvas does.
Next, duplicate the outline layer and set the copy aside, for example recolored to white, so you have a shape you can use for fills and highlights. Create a fill layer beneath the outline and paint in the main color with a solid brush. If the outline is closed, you can use ColorDrop, but check the edges afterward because gaps will leak color. Clean any leaks with the eraser.
For a more graffiti-style fill, try:
- A flat base color with a gradient layered above it, clipped to the base using a clipping mask.
- Two-tone fills, with a lighter color on the upper-left of each stroke and a darker one on the lower-right.
- Alpha Lock on the fill layer so you can paint inside the shapes without leaking out.
Step 5: Add shadows, highlights, and details
Detail is what separates a flat sticker from a convincing piece. Add each effect on its own layer:
- Inner outline. Draw a thin, offset second outline inside the letters. This is the classic graffiti "double-line" look.
- Highlights. Add short white strokes or small shapes along the edges that face your imagined light source. Sharp, simple highlights read better than soft ones.
- Cast shadow. Duplicate the outline layer, fill it with a dark color, offset it down and to one side, and place it beneath the main letters. A hard-edged offset shadow is the fastest way to add depth.
- Texture and sparkles. Use a grain or splatter brush for spray-paint texture, and add small stars or glints at the corners of the strongest highlights.
Restrain yourself with texture. A few well-placed marks do more than a full layer of noise.
Step 6: Finish the outer area and background
The last pass is the area around the letters. Add a contour outline around the whole word, drips, a halo of color, or a patterned wall. Keep this behind the letters and make sure the background doesn't compete with them. Check contrast by temporarily viewing the piece in grayscale. If the letters still read clearly without color, the design is solid.
Organize layers for motion work
If the artwork will go into a video project, build it with that in mind from the beginning. A well-labeled layer stack makes the handoff painless:
- Sketch (hidden)
- Outline
- Fill
- Inner details
- Highlights
- Cast shadow
- Texture
- Background
Even better, separate each letter onto its own layer or group. That makes per-letter animation, such as staggered reveals or tag-style stroke wipes, much easier.
Export your layers in a format your video software can read, such as a layered PSD. For tools that don't read PSDs well, export PNGs with transparent backgrounds.
Animating your graffiti in After Effects
Once the layers are in After Effects, common treatments include:
- Stroke reveals. Trace each letter's outline with a shape layer and use Trim Paths, then use the traced path as a track matte over the painted outline.
- Per-letter stagger. Offset the start time of each letter layer for a hand-drawn build-on.
- Wall integration. Place the piece on footage using a tracked surface, then apply Multiply or Overlay blend modes and a texture pass so it appears painted onto brick or concrete.
- Camera moves. Convert the layers to 3D and add subtle depth between the background, shadow, and letters.
Common mistakes to avoid
- Inking too early. Skipping the sketch layers gives weak letter structure that no amount of rendering fixes.
- Merging too soon. Flatten the outline into the fill and you lose the ability to recolor or animate it.
- Overusing effects. Too many gradients, glows, and textures flatten the contrast. Lead with shape, then color.
- Inconsistent light direction. Pick one light source and keep highlights and shadows consistent.
- Ignoring export needs. Decide the final resolution and format before you start, particularly if the artwork is headed to a video timeline.
Quick FAQ
What's the best brush for graffiti in Procreate? A stabilized Studio Pen for outlines and a solid brush for fills cover most of the work. Add spray or grain brushes for texture.
Do I need custom brushes? No. The default sets are enough, and custom packs mainly speed things up.
Can I animate the finished piece? Yes. Export layers to After Effects for stroke reveals, staggered builds, and compositing onto footage.