How to Draw Flares Procreate
StyleFrame Team9 min read
To draw a lens flare in Procreate, build each element (a soft glow, a few thin rings, small hexagonal ghosts, and a streak) on separate layers over a black canvas, then set those layers to Add or Screen so they behave like light instead of paint. Use a soft airbrush for the core, a hard brush or QuickShape for rings and ghosts, and Gaussian Blur and Chromatic Aberration to make the result look optical. Export the flare on black so you can drop it into After Effects with a Screen or Add blend mode.
What a lens flare actually is (and why it matters before you draw)
A real lens flare is light scattering and reflecting between glass elements. That gives you a predictable anatomy:
- Core glow: a bright, soft hotspot where the light source sits.
- Halo or ring: a faint circular edge, often with a slight color fringe.
- Ghosts: small, dim, repeated shapes (circles or polygons matching the lens aperture) strung along a line through the frame center.
- Streaks: horizontal lines on anamorphic lenses, or radial spikes from the aperture blades.
- Veiling glare: a low-contrast wash that lifts the blacks.
If you draw all of these as flat, saturated shapes, the flare reads as a sticker. If you keep each element subtle and separate, you can balance them later. For compositors, that separation is what makes a hand-drawn flare usable.
Set up the canvas
- Create a canvas at the final delivery size, or larger. For video, 3840×2160 is a sensible starting point; you can always scale down. Pick a color profile you will match in your compositing app (Display P3 or sRGB).
- Fill the background layer with solid black. Flares are additive light, so you want to judge them against darkness.
- Create a new layer for each element: Core, Halo, Ghosts, Streak, Glare. Name them now; you will thank yourself when you adjust them.
- Set each flare layer's blend mode to Add (or Screen for a gentler result). Tap the "N" on the layer to change it.
Working this way means your overlaps brighten naturally, the same way they will once the flare is layered over footage.
Step 1: Paint the core glow
Pick a warm off-white (not pure white) such as a pale yellow or peach. On the Core layer:
- Use a soft round airbrush (Procreate's Soft Brush under Airbrushing works well) at a large size.
- Tap once at your light position. Tap again with a smaller size and brighter color to build a hotspot.
- Open Adjustments > Gaussian Blur (Layer mode) and add a little blur to remove any brush texture.
Keep the center bright but not entirely clipped. A small area of true white surrounded by saturated warm color falls off more convincingly than a large white disc.
If you want extra bloom, apply Adjustments > Bloom to the Core layer with a modest transform value and size. Check it against the black background so you do not wash out the whole canvas.
Step 2: Draw the halo and rings
For clean circular shapes:
- On the Halo layer, pick a medium-saturation color (a cyan, magenta, or amber depending on the look you want).
- Draw a circle and hold at the end of the stroke so QuickShape snaps it to a perfect ellipse. Tap Edit Shape and adjust it to a true circle.
- Switch to Alpha Lock off, then apply Gaussian Blur at a low value to soften the edge.
- Lower the layer opacity to somewhere between 20% and 40%.
A ring that is bright on one edge and faint on the other feels more optical than a uniform line. Use the Eraser with a large soft brush to remove part of the ring, or mask it with a layer mask and a soft brush.
Step 3: Add ghosts and bokeh-like shapes
Ghosts are what sell the flare as a lens artifact rather than a glow effect.
- On the Ghosts layer, draw a small hexagon or circle. For polygons, use QuickShape and edit to a polygon with six sides, or just draw it with the Monoline brush.
- Fill it using ColorDrop at a low opacity, or paint it with a soft brush.
- Duplicate the layer and use Transform to scale and place copies along a diagonal line that passes through the canvas center and your light source.
- Vary the size, color, and opacity of each copy. Real ghosts are rarely identical.
To create a ghost with a brighter edge and a dim center, draw a filled circle and then apply a Gaussian Blur at a low value. Next, lower the interior with a large soft eraser pass. The edge-weighted look mimics internal reflections.
Step 4: Create streaks
For an anamorphic horizontal streak:
- On the Streak layer, draw a short horizontal ellipse with a hard brush at a bright cyan or blue.
- Use Transform > Distort or Uniform scaling off to stretch it across most of the canvas width.
- Apply Gaussian Blur to soften the vertical edges, then optionally add Motion Blur along the direction of the streak for a tight directional glow.
- Duplicate the layer, shrink it, and brighten the color so you have a thin, hot center line over a wider, softer one.
For radial spikes, turn on Drawing Guide > Symmetry in Radial mode, draw one thin tapering stroke from the center, and let the symmetry mirror it. Then blur lightly and reduce opacity so the spikes feel like they belong to the glow.
Step 5: Add color fringing and imperfection
Digital flares often look too clean. A few quick adjustments help:
- Chromatic Aberration: Under Adjustments, apply it to the Halo and Ghosts layers. Use the Perspective or Displace option depending on the effect you want, and keep the amount small.
- Noise: Apply a little Noise to the glare layer. This also hides banding in gradients, which is a common issue in 8-bit pipelines.
- Gradient shifts: Duplicate a ring layer, shift its hue with Adjustments > Hue, Saturation, Brightness, and offset it by a pixel or two.
- Glare: On the Glare layer, fill a large soft airbrush stroke across the frame at 5–10% opacity in a warm tone. This is the veiling haze that lifts shadows around a bright light.
Check the entire composite at 100% zoom and also scaled down. Details that look good enlarged can get lost at video resolution.
Step 6: Export for use in motion work
How you export determines how well the flare behaves in video software.
- Flare on black: Hide any non-flare artwork, keep the black background visible, and export as PNG (or TIFF if your workflow allows it). In After Effects or Premiere Pro, place it above your footage and set the blend mode to Screen or Add. The black drops out.
- Transparent PNG: You can hide the black layer and export with transparency, but additive blend modes inside Procreate do not carry over once the layers are flattened over nothing. Colors can look dimmer or fringed. If you need transparency, test it against your footage before committing.
- Separate elements: Export the core, rings, ghosts, and streaks as separate files. In After Effects you can then animate each on its own, offsetting ghosts along the flare axis as the light source moves, which is how real flares behave.
Remember that Procreate files are 8-bit per channel in most workflows. If you plan to grade heavily afterward, add noise or grain in your compositing app to prevent banding in glow falloffs.
Common mistakes to avoid
- Pure white everywhere: It makes the flare look like a clipped highlight instead of colored light. Keep most of the flare tinted.
- Perfect symmetry: Real flares are slightly asymmetric. Nudge, rotate, and vary opacity.
- Wrong blend mode: Normal mode over footage gives you a visible gray halo. Use Screen or Add.
- Ignoring the light source: Ghosts must line up on an axis through the frame center and the source. If the source moves in your shot, the ghosts must move with it.
- Overuse: A flare that draws attention away from the subject is usually too strong. Lower the opacity before adding more elements.
Taking hand-drawn flares into a motion pipeline
Once you have the flare elements, a few habits make them production-friendly:
- Build a small library. Save a set of flares in different color temperatures and sizes. Reuse and recolor them instead of redrawing.
- Animate in After Effects. Position the core at the light source, then link the ghosts' positions with expressions or a null object so they slide along the flare axis. Add subtle flicker with the Wiggle expression on opacity.
- Match the footage. Add a touch of blur, grain, and lens distortion to the flare so it shares the plate's characteristics. A flare that is sharper than the footage will look pasted on.
- Keep it non-destructive. Use adjustment layers and keep Procreate's layers separated until the end, so you can retint or rebalance without redrawing.
Where Styleframe fits
Hand-drawn flares are one piece of a larger look. If you are developing styleframes or short animated sequences, is an AI video and motion tool you can explore alongside your Procreate work.
A practical use: take your Procreate artwork, including flare overlays you drew yourself, and use it as a reference so a generated sequence keeps your lighting and color intent. Then bring the results into After Effects or another compositing app, where you can layer your hand-drawn flare plates with Screen or Add and finish the composite as usual. Your flares stay under your control.
Quick checklist
- Black canvas, separate layers for core, halo, ghosts, streak, and glare
- Add or Screen blend modes on every flare layer
- Soft airbrush for glow, QuickShape for rings, Radial Symmetry for spikes
- Gaussian Blur, Chromatic Aberration, and light Noise for realism
- Export on black and composite with Screen or Add
- Keep elements separate so you can animate and rebalance them in After Effects
Draw the flare as light, not as paint, and keep each element adjustable. That approach gives you a result that holds up in motion work, whether the shot is a quick title sequence or a full composite.