How to Draw Flames in Procreate
StyleFrame Team8 min read
To draw flames in Procreate, paint a dark background, then lay in the flame colors from pale yellow at the core to deep red at the edges. Soften them with Gaussian Blur, drag the shapes upward with Liquify to create tongues of fire, and add a glow layer set to a light-based blend mode such as Add or Screen. For a more painterly look, use the built-in Flames brush from the Elements set or a textured round brush, then finish with sparks and embers on separate layers.
The method below produces a clean still. It also gives motion artists layered assets they can bring into After Effects or another compositing tool.
What You Need Before You Start
Procreate's built-in tools cover everything in this tutorial. You don't need a custom brush pack, though one can speed up the painterly pass.
- Canvas: A large canvas gives you room to scale the flame in After Effects later. Something near 3800×2800 px, or 4K (3840×2160) if the art is headed for video, keeps edges clean.
- Brushes: The Flames brush in the Elements category, plus a textured round brush such as a gouache or oil-style brush for hand-painted edges.
- Palette: Five to six colors. A pale cream-yellow, a saturated yellow, orange, red-orange, deep red, and a near-black for the background.
- Input: An Apple Pencil helps. Pressure-sensitive strokes are what give flames their tapered tips.
Set the canvas color or a bottom layer to a very dark brown or near-black. Flames read as light sources, so they need a dark field behind them to look hot.
Step 1: Block In the Flame Shape
Create a new layer and sketch the overall silhouette with a hard brush in mid-orange. Flames follow a few simple rules:
- They are wider at the base and taper into curved tips.
- The outer flame is made of several tongues of different heights, not one smooth teardrop.
- Tongues lean slightly in a shared direction, which implies airflow.
Keep the silhouette loose. You will blur and push it later, so precision here is wasted effort. Odd numbers of tongues (three, five, seven) tend to look more natural than even ones.
Step 2: Build the Colors From Light to Dark
Fire is hottest at the core and cools toward the edges, so the color layout should do the same.
- Put the palest yellow at the base center of the flame.
- Surround it with a saturated yellow.
- Ring that with orange, then red-orange.
- Let the outermost edges fall to deep red, fading into the dark background.
Paint all of these colors on the same layer. When everything sits on one layer, the blur in the next step mixes the transitions instead of leaving hard seams between color groups. Work in broad, upward strokes that follow the direction of the flame.
If you want more control later, duplicate this layer before blurring so you keep an untouched version.
Step 3: Blend With Gaussian Blur
Open the Adjustments menu (the magic wand icon) and choose Gaussian Blur. Set it to Layer, then slide your pencil across the canvas to increase the blur.
- A moderate amount, enough to dissolve the borders between colors, works best. One reference tutorial blurred to around 44%, which is a reasonable starting point.
- Too much blur turns the flame into a smudge. Too little leaves visible bands.
The result looks like a soft gradient glow, and that's intended. The shape comes back in the next step.
Step 4: Pull Flame Tongues With Liquify
Go to Adjustments and choose Liquify. Select the Push mode and drag upward from the base of the glow to stretch it into licking tongues.
- Use a moderate brush size and modest pressure, and drag in short, curved gestures.
- Vary the length of each pull so the tongues don't match.
- Curve some tips slightly sideways. Straight vertical pulls look like candles, not wildfire.
- Use a smaller size for fine tips and a larger one for the main body.
Liquify on a blurred base produces the smooth, fluid look that is difficult to get with direct brushwork. If a pull goes wrong, undo and try again at lower pressure.
Step 5: Add a Painterly Pass
At this point you have a soft, glowing flame. To give it the feel of illustration rather than a digital gradient, add a hand-painted layer on top.
Option A: the built-in Flames brush. Select Flames from the Elements set and make quick, upward strokes in orange and yellow. This is the fastest way to get recognizable fire shapes, and it works well for icons and quick concept art.
Option B: a textured round brush. Use a gouache or oil-style brush and paint flame shapes directly. Pull from the base upward, lift the pencil at the end of each stroke so the tip tapers, and layer lighter colors over darker ones.
In both cases:
- Keep the brightest, palest color near the base and center.
- Let darker reds frame the outside.
- Leave gaps between tongues so the dark background shows through. Negative space makes flames look alive.
Step 6: Create the Glow
A flame is a light source, so it should illuminate what's around it.
- Duplicate your flame layer and merge the copy if needed.
- Apply a large Gaussian Blur to the duplicate.
- Set that layer's blend mode to Add or Screen.
- Lower the opacity until the glow feels natural rather than foggy.
Add a second, tighter glow layer for the hot core. Then create a new layer set to Color Dodge or Add with a soft airbrush in orange, and paint ambient light onto nearby objects such as logs, rocks, or a character's face. Warm light cast on surroundings does more to sell fire than anything on the flame itself.
Step 7: Sparks, Embers, and Smoke
Finish on separate layers so you can adjust or remove them without touching the flame.
- Embers: Use a small hard brush with scattered dots in yellow and orange. Make some larger and brighter, and keep most small and faint.
- Sparks: Use thin, short strokes angled upward with slight curves.
- Smoke: Use a soft textured brush in dark gray at low opacity above the flame, then smear it upward with the Smudge tool.
Keeping each on its own layer pays off if you export for animation.
Common Mistakes to Avoid
- Painting on many layers before blending. Colors won't merge smoothly.
- Using pure black for the whole background. Very dark brown or blue-black gives richer contrast.
- Making every tongue symmetrical. Real flames are irregular and asymmetrical.
- Skipping the glow. Without it the flame looks like a sticker.
- Over-saturating the core. The hottest area should be near white or pale yellow, not bright orange.
Taking Procreate Flames Into a Motion Workflow
Still flames are useful as concept art, title treatments, or texture elements. If you're a motion designer or VFX artist, a few habits make the artwork more reusable.
Export for compositing. Hide the background layer and export a transparent PNG. In After Effects, you can also keep the flame on black and set the layer's blend mode to Add or Screen, which drops the black out and preserves the glow.
Animate in Procreate or in your compositor. Procreate's Animation Assist lets you draw flame cycles frame by frame, and you can export the result as video, GIF, or stills. In After Effects, you can alternatively take a single painted flame and animate it with effects like Turbulent Displace, Wave Warp, or Glow, then layer multiple copies at different scales and timings.
Keep layers separate. Export the core, outer flame, glow, sparks, and smoke individually so you can time, blur, and color-grade each one in your compositor.
Where Styleframe Fits
Procreate is excellent for designing the look of a flame. Turning that look into motion at production resolution is a different job, and it's where Styleframe can help. Styleframe is an AI video and motion tool built around artistic control instead of one-click generation. Every generation is driven by reference images, video clips, and keyframes that you supply, and iteration is non-destructive, so you can revise without losing earlier versions.
A few practical ways it can work with a flame illustration:
- Frames-to-Video: Paint a start frame and an end frame of your flame in Procreate, such as a small flicker and a roaring burst. Use them as keyframes to generate the motion between them, guided by your own art instead of a text prompt alone.
- Restyle and Ink-and-Paint: These are reference-driven style transfer tools. Use your Procreate flame as the style reference to carry its hand-painted look onto other footage or animation, so fire elements share a consistent visual language.
- Remove Background: Isolate a flame element from its backdrop for compositing.
- 4K Upscale: Bring lower-resolution results up to production-ready 4K output.
Styleframe is designed to slot into the pipeline you already use. It exports image sequences that go straight into After Effects or Nuke. You keep your compositing, color, and finishing steps where they are, and use Styleframe to generate or restyle the flame motion beforehand.
Quick Recap
- Set up a large canvas with a dark background.
- Block in a loose flame silhouette.
- Paint colors light-to-dark on a single layer.
- Apply Gaussian Blur to merge them.
- Use Liquify to pull the shapes upward into tongues.
- Add a painterly pass with the Flames brush or a textured round brush.
- Build glow layers with Add or Screen.
- Finish with embers, sparks, and smoke on separate layers.
Practice the sequence a few times with different palettes and you'll get a repeatable workflow for stylized fire. From there, you can animate it by hand, build it up in After Effects, or use it as the visual reference for generated motion.