How to Draw Fireworks Procreate
StyleFrame Team8 min read
To draw fireworks in Procreate, start with a near-black canvas and a sparkle-style brush with its spacing increased. Paint a filled circle of scattered dots, duplicate that layer, and apply Perspective Blur to the copy so the dots stretch into radial trails. Then set the blurred layer to Screen or Add and layer a sharp copy of the dots on top for bright points. For willow or chrysanthemum bursts, use radial symmetry with a thin brush instead. Either way, build each burst on its own layer so it can be recolored, scaled, and animated later.
What You Need Before You Start
Procreate's stock brushes are enough. The Luminance set includes a Glimmer brush that already scatters light-like dots, and you'll duplicate and modify it. You'll also use:
- A dark canvas. Pure black or deep navy. Fireworks are additive light, so everything depends on contrast.
- An Apple Pencil. Pressure variation changes dot size, which gives bursts a more organic look.
- A canvas at least 3000 px on the long side if you plan to composite the art into video. Blur and glow effects fall apart when upscaled aggressively.
If you're building this for a motion project, create the canvas at your comp's aspect ratio (16:9 for most video work) so you don't have to crop or reposition later.
Method 1: The Dotted Burst (Peony Style)
This is the quickest way to a convincing firework, and every result comes out slightly different.
Step 1: Set Up the Canvas
Create a new canvas in landscape. Open the Layers panel, tap the background color, and set it to black or a very dark blue. A dark blue background reads more like a night sky, and it gives you room to add a faint gradient near the horizon later.
Step 2: Duplicate and Modify the Brush
Open the Brush Library and find Glimmer in the Luminance set. Swipe left on it and choose Duplicate so the original stays intact. Open the duplicate, go to Stroke Path, and raise Spacing until individual dots separate from one another. Somewhere in the 60% range is a good starting point. If the dots overlap into a solid line, push it higher.
Step 3: Pick Your Color and Size
Choose a warm gold or a saturated color rather than white. White clips quickly when you add glow, and you can't recover hue after that. Set the brush size fairly small, around 10–15%, and opacity to 100%.
Step 4: Paint the Dot Field
On a new layer, draw a filled circle of dots near the center of the canvas, leaving generous space on every side. Work in a spiral from the middle outward, or lay down concentric rings. Even spacing matters here. Clumps turn into blobs once you blur them, and gaps turn into dark wedges.
Press harder on some strokes and lighter on others. The size variation becomes brightness variation after blurring, which is what makes the burst feel alive instead of mechanical. If it looks wrong, undo and redo it. The dot field takes seconds to paint and is the biggest factor in how the finished burst looks.
Step 5: Duplicate and Blur
Duplicate the dot layer. Hide the original for now and select the copy. Open Adjustments, then Perspective Blur. You can use either the Positional or the Directional mode. Drag to increase the blur, and the dots smear outward into streaks. You're aiming for streaks long enough to read as trails while leaving some shape from the original ring.
Step 6: Recombine With Blend Modes
Set the blurred layer to Screen or Add (Procreate calls it Add in the blend list). Turn the original dot layer back on above it. Now you have soft trails underneath and crisp bright points on top. Reduce the opacity of the sharp layer if it fights the trails.
For glow, duplicate the blurred layer once more, apply a Gaussian Blur of 5–10%, and set that copy to Add at a lower opacity. This is the layer that sells the light.
Method 2: Radial Symmetry Line Bursts
For willow, chrysanthemum, and palm-style bursts, dots are the wrong tool. You want thin tapered lines radiating from a center.
- Open Actions → Canvas → Drawing Guide → Edit Drawing Guide, and choose Symmetry. Set the source to Radial.
- Turn on Drawing Assist for the layer you're working on.
- Pick a fine tapered brush from the Inking or Calligraphy sets, or a thin Glimmer variant.
- Draw one short curving stroke outward from the center. The symmetry engine repeats it around the axis.
- Add a second pass with shorter strokes at different angles to fill gaps.
Willow-style fireworks are a good fit for this method. Draw each stroke with a slight downward arc and let the tips fade. Use a lower-opacity brush at the tips, or erase the ends with a soft eraser so they taper into the sky.
Because the symmetry is mathematically even, it can look too clean. Break it up by selecting parts of the layer and nudging them slightly, or by drawing a second asymmetrical layer over the top.
Method 3: Brush Packs and Stamps
If you need volume rather than hand-built bursts, free community firework brush packs in Procreate's Folio contain dozens of stamp-style bursts. These are single-tap bursts, so they're good for a dense finale or a background full of distant fireworks.
A few cautions when using packs:
- Check the license before using them in client work. Free doesn't always mean commercial use is allowed.
- Stamp the same brush at different sizes and rotations, or viewers will see the repetition immediately.
- Recolor stamps with Hue, Saturation, Brightness adjustments instead of re-stamping, so edits stay quick.
A hybrid approach works well: hand-build one or two hero bursts with Method 1 or 2, and use stamps for small background bursts at lower opacity.
Composing the Scene
A burst alone is a graphic. A burst in a scene looks like a photograph or an illustration.
- Foreground silhouette. Add a skyline, hills, a lake edge, or rooftops on a layer in near-black. Silhouettes give scale and depth.
- Reflections. If there's water, duplicate the burst layer, flip it vertically, lower the opacity, and apply a Motion Blur.
- Smoke. Real fireworks leave haze. Paint a soft, large-radius cloud in a muted version of the burst's color on a layer beneath it, set to Screen at low opacity.
- Light spill. Add a faint colored glow on the horizon or nearby clouds using a big soft airbrush on a Screen layer.
- Scale variety. Use two or three burst sizes at different brightness levels. Distant ones should be smaller, dimmer, and slightly blurred.
Color Choices That Hold Up
Pick one or two main hues and one accent, not a rainbow per burst. Gold and deep red, teal and magenta, or white-blue with a pink fringe all read as intentional. Keep the highest-value highlights slightly desaturated so Add blending doesn't push them into flat white. When the glow stacks, hue shifts happen: reds drift toward orange and blues toward cyan. Check the result on a calibrated display if the art is going into a broadcast or streaming deliverable.
Common Mistakes
- Dots too uniform. Vary size and pressure.
- Blur too heavy. Keep a hint of the original dot structure.
- Everything on one layer. You lose the ability to recolor, move, or animate individual bursts.
- Pure white cores. Use a warm or tinted near-white so the core still has hue.
- Light background bleed. If your canvas isn't truly dark, Screen and Add layers will lift the whole sky into gray.
Taking Procreate Fireworks Into Motion
Procreate is good for designing the look: the dot structure, palette, and glow. It's less suited to producing a long, controllable burst animation. Most professional workflows export layered art and move into a motion tool.
The straightforward route is to export a PSD, or PNGs per layer, and bring them into After Effects. The black background drops out with a Screen or Add blend mode on each layer. From there you can scale each burst up from a point, animate opacity and glow, add trails with a particle tool, and composite over footage with proper color management.
Quick Workflow Summary
- Create a dark, high-resolution canvas at your delivery aspect ratio.
- Duplicate Glimmer and increase its spacing.
- Paint a varied dot field, then duplicate it.
- Apply Perspective Blur to the copy and set it to Screen or Add.
- Layer a sharp dot copy and a soft glow copy on top.
- Use radial symmetry for line-based bursts.
- Add silhouettes, smoke, and reflections for context.
- Export layered files for animation in After Effects or your tool of choice.
Spend most of your time on the dot field or the base strokes. The blur, blending, and glow are quick, repeatable steps, and the base shape decides whether the burst looks hand-made or generic.