How to Draw Fire Procreate
StyleFrame Team9 min read
To draw fire in Procreate, paint on a dark background and build the flame in layers from a saturated red-orange base up to a pale yellow-white core. Blend the colors with soft brushes, Gaussian Blur, and Liquify, then add a glow on a separate layer set to Add or Screen. Keep the flame shapes asymmetrical and curling, because uniform shapes are what make hand-drawn fire look fake. If you animate it, the same layered setup carries over to a frame-by-frame cycle you can export and composite in After Effects.
What You Need Before You Start
Fire is mostly a lighting problem. You are painting a light source, not an object, so the setup matters more than the brush.
- A dark canvas. Fill the background with near-black or a deep desaturated brown. Flames only read as bright when they sit against darkness.
- A soft round brush. Procreate's default Soft Airbrush is enough. A textured brush can add character later, but the base should be smooth.
- A palette of four to five values. Think deep red, orange, yellow, pale yellow, and near-white. Pick them before you paint so you aren't improvising in the middle of a blend.
- Separate layers for the fire, the glow, and the object it burns. Keeping these apart lets you adjust each without repainting the others.
For canvas size, work larger than you think you need. If the fire is going into a video project, start at your delivery resolution or higher so you aren't scaling up painted edges later.
Step 1: Block In a Burning Source
Fire needs something to sit on. Paint a simple log, torch head, candle wick, or ember bed on its own layer. It doesn't need detail, since most of it will be lit or covered by the flame. A rough silhouette gives the flame a base and gives you a sense of scale.
Leave generous room above the source. Flames travel upward and sideways, and the tips are the most expressive part of the drawing.
Step 2: Draw the Flame Shapes With Gesture Lines
Create a new layer above the source. Choose a saturated red-orange and use a small brush to draw loose flame gestures: curved, tapering strokes that start wide at the base and thin out toward the tips.
A few rules keep the shapes believable:
- Avoid symmetry. Real flames lean, twist, and fold over themselves. Let a curve fall back on itself and you get the sharp-looking corner that makes fire feel alive.
- Vary the heights. A cluster of tongues at different lengths reads as one fire. Evenly spaced tongues read as a pattern.
- Let some tongues detach. Small, separated wisps near the top suggest turbulence and heat.
- Think in layers of depth. Larger outer flames sit behind smaller, brighter inner ones.
At this stage, work fast and loosely. You are establishing rhythm, not rendering.
Step 3: Build Color From the Outside In
Fire is hottest and brightest at its core and cooler toward its edges. Paint in that order:
- Outer flame: deep red to red-orange, filling the full silhouette.
- Middle flame: orange, painted inside the outer shape but not reaching all the way to the edges.
- Inner flame: yellow, smaller again and concentrated near the base.
- Core: pale yellow or near-white at the hottest point, usually low in the flame.
Use a soft brush at moderate opacity so each color fades into the next. One approach is to paint all the flame colors on a single layer so they blend into each other when you smudge or blur. Another is to separate them onto different layers for more control later. The single-layer method is faster and gives smoother gradients. The multi-layer method is better if you plan to animate or adjust color afterward.
Don't be afraid of a muddy first pass. The blur and liquify steps below tighten everything up.
Step 4: Blend With Gaussian Blur and Liquify
Two adjustments in Procreate do most of the heavy lifting on fire.
Gaussian Blur softens the transitions between colors and gives the flame its glowing, gaseous quality. Apply it to the flame layer and slide your Apple Pencil across the canvas to set the amount. A moderate blur is usually right, enough to dissolve hard color bands while leaving the overall silhouette recognizable.
Liquify then restores the upward flicker. Use a modest size, and drag from the base toward the tips in short, curving motions. You are pulling the blurred color into tongues. Vary pressure and direction so no two flames move identically. Small sideways flicks at the tips produce the curl that blur alone removes.
You can repeat the cycle: blur lightly, liquify, then repaint highlights with a small soft brush. Several light passes look better than one heavy one.
Step 5: Add Glow With Blend Modes
The glow is what makes the fire feel like a light source instead of an orange shape.
- Create a new layer above the flame and set its blend mode to Add or Screen.
- With a large, soft brush at low opacity, paint orange around and behind the flame, and a hint of yellow nearer the core.
- Apply a Gaussian Blur to spread the glow further.
- Create another Add or Screen layer for light cast onto nearby surfaces: the log, the ground, a character's face. Use warm orange and keep it brightest closest to the flame.
Light spill on surrounding objects does more for realism than anything you paint inside the flame itself. If the fire is in a scene, tint the shadows around it a slightly cooler or darker tone so the warm light has contrast to push against.
Step 6: Finish With Sparks, Smoke, and Texture
Small details make the flame feel physical:
- Embers and sparks: tiny bright dots and short streaks drifting upward, brightest near the fire and fading with distance.
- Smoke: a low-opacity gray or brown-gray layer above the flame, smudged or lightly blurred, with softer edges the higher it goes.
- Heat texture: if you want a more painterly look, add a textured brush pass on the outer flame edges. Gouache- or grain-style brushes work well for stylized, illustrated fire without disturbing the smooth core.
If you want a very quick version, Procreate's built-in Flames brush in the Elements set offers a simple way to draw a stylized flame. It's a useful shortcut for thumbnails or simple illustration, though it gives you less control over shape and color than the layered method.
Turning a Procreate Fire Into Animation
For motion artists, a still flame is usually the first step toward a loop. You can build a short frame-by-frame cycle from your drawn poses. A workable approach:
- Keep the source object and background on static layers, and put only the flame on animated frames.
- Draw four to eight distinct flame poses. Each should keep the same overall mass and base but change the tip shapes, with tongues lifting, folding, and breaking away.
- Make the first and last poses flow into each other so the loop doesn't pop.
- Animate the glow layer on its own, with subtle brightness variation, rather than baking it into every frame.
When you're done, export an image sequence rather than a compressed video. If you need to composite the fire over footage, keep the flame on a transparent background. If the fire sits on a black background and you intend to layer it with an additive blend, you can skip transparency entirely and rely on the blend mode.
Compositing Hand-Drawn Fire in After Effects
Once the sequence is in After Effects, a few moves help the drawing sit in a shot:
- Set the blend mode to Add or Screen on black-background flames so the black drops out and the fire adds light to the scene.
- Add subtle motion. A light displacement or warp effect on the flame layer introduces organic variation, so a short loop doesn't look mechanical.
- Duplicate and offset. Stack two or three copies at different scales and time offsets to build a larger, less repetitive fire from one small cycle.
- Add glow and light interaction. Use a glow effect or a blurred, color-matched solid to light the surrounding footage, and animate its intensity with a slight flicker.
- Grade to match. Match black levels and color temperature to the plate so the fire doesn't look pasted on.
Where Styleframe Fits in a Fire Workflow
Hand-drawn fire from Procreate gives you a distinctive look, but drawing every pose is slow, and extending a four-frame loop into a long shot is where artists often stall. Styleframe is an AI video and motion tool that can pick up from the frames you've already drawn, using your own flame poses and references as a starting point so the result follows your drawn shapes rather than inventing a flame from scratch.
It isn't a replacement for drawing fire well. The quality of the result still depends on the strength of your keyframes and references, which is why the Procreate fundamentals above matter.
Common Mistakes to Avoid
- Painting on a light background. Fire loses its glow and looks flat.
- Making every flame the same shape. Repetition is the fastest way to read as clip art.
- Skipping the glow layer. Without light spill, the flame looks cut out.
- Over-blurring. Too much blur removes the tongues entirely. Re-establish shape with Liquify and highlights.
- Using pure white everywhere. Reserve near-white for the smallest hottest core, so the yellows and oranges carry the rest of the flame.
- Baking everything onto one layer before animating. Keep flame, glow, and background separate so you can change them independently.
Quick Recap
Start with a dark canvas and a simple burning source. Sketch asymmetrical flame gestures, build color from red through orange and yellow to a pale core, then blend with Gaussian Blur and Liquify. Add glow on Add or Screen layers, finish with sparks and smoke, and export an image sequence if you plan to animate. From there, composite in After Effects, and use a tool like Styleframe when you need to extend your drawn keyframes into longer, style-consistent motion.