How to Draw Eyelashes Procreate
StyleFrame Team8 min read
To draw eyelashes in Procreate, use a tapered, pressure-sensitive brush such as a fine liner, and draw each lash as a single curved flick on its own layer, starting at the lash line. Keep the lashes short and gently curved at the inner corner, then longer and more curved toward the outer corner. Vary the length and angle of every stroke, and add a few darker roots and small highlights to give them volume.
What You Need Before You Start
You don't need a custom brush pack. Procreate's stock inking and sketching brushes handle lashes well. Set up the canvas first:
- A sketch layer with the eye shape, eyelid crease, and iris already placed.
- A dedicated lashes layer above the eye, separate from the skin and eyeball.
- A high-resolution canvas. Lashes are thin, so a larger canvas lets you zoom in and keep the strokes clean when you scale the art later.
- An Apple Pencil or pressure-sensitive stylus. Tapering depends on pressure and speed, and a finger won't give you the same result.
Keeping the lashes on their own layer is the most useful habit here. You can erase, recolor, transform, or mirror them without touching the eye underneath, and it matters even more if the art is headed into animation.
Step 1: Choose and Tune the Brush
Pick a fine-tipped brush with a natural taper. A technical pen or fine liner works, as does a tapered inking brush. What you want is a stroke that starts thicker at the root and thins to a point at the tip.
Then adjust the brush in its settings:
- Size: Keep it small enough that a single stroke reads as one hair, not a stripe. Resize per eye as needed, because lash thickness is relative to the face.
- Stroke taper: In the brush's Stroke Properties and Taper settings, increase the end taper so each lash finishes in a point. A small start taper stops the root from looking blunt.
- StreamLine: A modest amount smooths the curve of each flick, which helps if your hand wobbles at small sizes. Too much makes strokes feel slow and lagging.
- Pressure response: Check that light pressure thins the line. If the brush feels flat, adjust the pressure curve in the Apple Pencil settings.
Test the brush on a blank area before drawing. Pull out five or six flicks and see whether they taper the way you want.
Step 2: Establish the Lash Line
Before drawing any hairs, define where they grow from. On your sketch layer, trace the upper lid edge and the lower lid edge. Lashes emerge from the lid margin, not from the skin above it, so this line determines whether the eye looks believable.
On the upper lid, make the lash line a little heavier, as a thin, slightly thicker stroke. This sits at the base of the lashes and works as a natural liner. On the lower lid, keep it lighter or skip it, and let the individual lashes define the edge.
Step 3: Draw the Upper Lashes
Work on your lashes layer and pull each stroke away from the lid in one confident motion. Slow, hesitant strokes produce wobbly lines with no taper.
- Start at the inner corner. Draw shorter lashes with less curve. They point more directly outward and slightly downward.
- Move to the center. Lengthen the strokes and increase the curl. The longest lashes usually sit between the center and the outer third of the lid.
- Finish at the outer corner. Lashes here sweep outward along the direction of the lid, and are often slightly shorter than the longest ones.
- Vary everything. Change length, angle, and spacing. Real lashes clump, cross, and fan out unevenly. Perfectly parallel strokes look like a fringe.
- Add a second layer. Place a few shorter or longer lashes behind the first row, especially toward the outer corner. This builds volume without making a solid mass.
Flip your canvas horizontally now and then. Procreate's canvas flip (in the Actions menu, under Canvas) exposes lopsided curves and uneven spacing that you stop noticing while drawing.
Step 4: Draw the Lower Lashes
Lower lashes are shorter, finer, and sparser. Use lighter pressure and a smaller brush size if needed.
- Space them more evenly than the upper lashes.
- Curve them less, and angle them slightly downward and outward.
- Leave gaps. Overdrawing the lower lid is a common cause of a heavy, tired look.
- Group a few in small clusters, then leave open space.
Keep them on the same layer or a separate one. A separate layer lets you lower its opacity if the lower lashes compete with the upper ones.
Step 5: Add Depth with Shading and Highlights
Flat black strokes read as a drawn fringe. A bit of tonal variation makes them read as hair.
- Darken the roots. Lock the layer with Alpha Lock, then paint a slightly darker tone at the base of the lashes. This adds thickness and shadow.
- Soften the tips. If your base color is very dark, shift the tips slightly lighter or more transparent, so they thin out naturally.
- Add highlights. On a new layer, paint small light accents on a few lashes where the light hits them. Fewer is better. One or two highlights on the longest lashes are usually enough.
- Cast a soft shadow. On a layer beneath the lashes, set to Multiply, paint a faint shadow on the eyelid or the eyeball. This anchors the lashes to the face.
If the light source in your illustration is strong, check that the highlights and shadows agree with it. Inconsistent lighting is more noticeable on small details than you'd expect.
Step 6: Refine
Zoom out to normal viewing size and look at the whole eye. Then:
- Erase or redraw strokes that look too uniform or too thick.
- Use the Transform tool to nudge individual lashes (select a few with the Freehand selection) rather than redrawing everything.
- Add a few stray lashes slightly outside the main groups.
- Check the balance between the two eyes if you're drawing a face. The lashes don't need to match exactly, but their overall weight and curl should be consistent.
Build a Custom Lash Brush
If you draw lashes often, a custom brush speeds things up. One approach is to duplicate a basic round brush and adjust it:
- Push the Stroke Properties taper so the stroke ends in a sharp point, and keep the start taper low so the root stays thick.
- Set a size limit appropriate for fine lines, and tune Dynamics such as falloff and size variance to suit your hand.
- Alternatively, draw a single curved lash, import it as a shape source, and use it as a stamp. Adjust spacing to change how dense the lashes look. When stamping, resize and rotate each stamp, then merge, so the lashes don't look cloned.
Stamp brushes are fast but can look mechanical, so mix stamped lashes with a few hand-drawn flicks.
Common Mistakes to Avoid
- Drawing lashes from the skin instead of the lid margin. They look pasted on.
- Making every lash the same length and curve. It reads as a comb.
- Using too many lashes on the lower lid. The eye looks heavy.
- Ignoring the direction of the eye. Lashes follow the curvature of the lid, not straight lines.
- Working on one layer. You can't fix a single area without damaging the eye art around it.
Taking Procreate Lashes into a Motion Pipeline
If you're a motion designer or animator, the lashes might not be the final deliverable. They may be part of a character that gets rigged or composited in After Effects. A few habits make that handoff easier:
- Separate layers by function. Keep upper lashes, lower lashes, lash line, and highlights on different layers so each can be animated independently.
- Draw the lashes slightly extended. If the eyelid will move, hidden overlap prevents gaps when you rig a blink with Puppet pins or mesh warps.
- Name your layers before export. Procreate can export layered PSD files, which After Effects imports as separate layers.
- Keep a transparent background so the art can sit over any plate or background.
- Draw at the final size or larger. Scaling a small lash drawing up will soften those fine tapers.
For frame-by-frame work, Procreate's Animation Assist can help you rough out a blink, but for longer or more complex shots many artists export the layers and animate elsewhere.
Where Styleframe Fits
Once you have a hand-drawn eye with lashes, you may want to extend that look into moving footage or more frames without redrawing everything. This is where can sit alongside Procreate. It's an AI video and motion tool built around artistic control, driven by your own reference images, video clips, and keyframes instead of one-click generation.
A few practical uses for a lash-heavy illustration workflow:
- Frames-to-Video: Use keyframes, such as an open-eye drawing and a closed-eye drawing from Procreate, to guide a generated transition between them. You decide the start and end states.
- Restyle and Ink-and-Paint: Use your Procreate drawing as a style reference, so the linework and lash treatment carry over to other footage or frames.
- Remove Background: Isolate a character or element so it's ready for compositing.
- 4K Upscale: Bring finished output up to production-ready 4K, which helps when fine details like lashes need to survive delivery.
Think of it as a way to extend your drawn style, not replace the drawing itself.
Quick Reference
Good lashes come down to consistent taper, believable variation, and clean layer structure. Get those right in Procreate and the art will hold up, whether it stays an illustration or moves into an animated pipeline.