How to Draw Dog Fur Procreate
StyleFrame Team8 min read
To draw dog fur in Procreate, block in the darkest base color, layer mid-tones and highlights over it, and smudge everything in the direction the hair grows. Then add texture with Procreate's built-in hair brushes (Short Hair, Fine Hair, Flowing Hair) in clumps rather than single strands, working from dark to light on separate layers. Finish with a technical pen at low opacity for fine strands, and erase the start of each stroke so the hairs blend into the coat.
The sections below cover the full process, from setup to finishing, plus how to carry a finished fur illustration into a motion pipeline.
What Makes Fur Look Like Fur
Most failed fur drawings come from drawing hairs instead of drawing form. Before you pick a brush, check your reference for four things:
- Direction. Hair follows the anatomy of the dog. It fans out from the nose, flows back along the cheeks, and falls down the ears. Every stroke you make should follow that flow.
- Clumps. Fur grows and settles in groups. Draw clumps of varying size, not uniform strands.
- Gaps. Leave space between strokes so the layers underneath show through. This gap is what makes fur look dimensional.
- Value structure. Light and shadow carry the form. Texture sits on top of a solid value foundation and cannot replace it.
If you keep these four in mind, even default brushes will give convincing results. Specialty fur brush packs speed things up, but they are not required.
Setting Up the Canvas
Work from a reference photo, ideally one with clear lighting so you can read where the shadows and highlights fall. Import it into the Reference window or place it beside your canvas.
Create a sketch layer for the outline, then a new empty layer beneath it for the base color. Keep your canvas large enough for the final use. If the illustration is going into a video timeline, start at or above your target resolution. Upscaling a small canvas later softens the very fine strokes that make fur work.
Plan on many layers. Fur gets built up gradually, and separate layers let you revise a color pass without destroying the work underneath.
Step 1: Block In the Base
Use a medium airbrush or any simple brush. The brush matters little here.
- Fill the dog's silhouette with the darkest color that will appear in the coat. For a warm-toned dog, choose a warm dark brown instead of black.
- Add a slightly lighter layer of color to mark where the major lights will fall.
- Keep everything fairly dark and soft. This layer defines the overall shape and mood.
Starting dark and building toward the light is a more forgiving workflow than the reverse, because highlights placed late have the most impact.
Step 2: Map Color Changes With a Clipping Mask
Create a new layer above the base and turn it into a clipping mask. Anything you paint stays inside the base shape, so you can work freely at the edges.
Color-pick from your reference and lay in the main color zones: a deeper orange or brown in the shadows, a mid-tone across the body, and a lighter tone where light hits. Don't try to make this look good yet. The aim is to know where color shifts occur, which later tells you where to place shadows, highlights, and strand colors.
Step 3: Smudge Along the Direction of Growth
Now soften the blocked colors. Take the medium airbrush or the Studio Pen with the Smudge tool and pull color in the direction of hair growth. Use light pressure and a reduced opacity.
Aim for a soft, painterly base in which the colors flow together and the form reads clearly. Step back and compare it with your reference at a smaller size. If the overall values and colors feel close, you're ready for texture. If they don't, add color and smudge again.
This is where many tutorials stop, but a smudged base alone looks like a blurred photo. The next steps are what make it read as fur.
Step 4: Lay In the First Texture Pass
Create a new layer above your color layers (not clipped, so strokes can extend past the edge). Pick a sharp-tipped brush such as the Studio Pen and, starting with your darkest tone, pull short strokes outward in the direction the fur grows.
Keep this pass loose. You're laying down a base texture that later passes will refine. Add a little dark color under areas like the ears and jaw to anchor them.
Use the Smudge tool with a hair brush such as Fine Hair to soften areas that need to be smoother. Short-coated dogs need much smoother fur than a long-haired breed.
Step 5: Build Fur in Clumps With Hair Brushes
This is the core of the process. Switch to the built-in hair brushes and work in this order:
- Fine Hair for the first layer of directional strands. Increase the size slightly so each stroke lays down several hairs at once.
- Short Hair for short-coated areas such as the muzzle and the front of the legs. It's soft, so press lightly. Overusing it makes the coat look artificial.
- Flowing Hair for longer fur and accents such as the chest, ears, and tail. Use it sparingly to add variety.
Work through the value range in passes. Start with dark tones, then move to the mid-range, then to the lights. Color-pick from the layer beneath and shift the value slightly each time. Put each color pass on its own layer so you can undo or adjust one without affecting the others.
Throughout, keep these habits:
- Vary stroke length and curvature so the coat doesn't look combed.
- Leave gaps so earlier layers show through.
- Overlap your strokes at different angles at the transitions between body regions, where hair direction changes.
- Use multiple brushes lightly instead of one brush heavily.
Step 6: Add Depth Around the Eyes, Nose, and Edges
Fur around facial features is what makes a dog portrait feel alive. Without it, the eyes and nose look pasted on.
- Eyes. Draw the eye shapes on their own layer, then add clipped layers for the pupil, iris depth, and a small highlight. Then add fur growing in toward the eye so it sits in the face.
- Nose. Build it with shadow and highlight layers, then add texture. Some artists use a texture brush for this, but if it looks too harsh, lower the opacity or paint it by hand.
- Edges. Use a sharp-pointed hair brush to add a few wisps along the outline. This breaks up the silhouette, which otherwise looks cut out. Add extra hairs at the mouth and ears.
Step 7: Fine Detail Strokes
Create a final layer and use a technical pen at reduced size and opacity. Add small strokes in your darkest tone in the creases and shadow areas, then in lighter tones for highlights along ridges where light catches the fur.
To make these strokes look natural, take an airbrush eraser and erase the starting point of each stroke so it fades into the fur beneath. A hard start point is the clearest sign of a drawn-on hair.
Then step back and look at the overall image. Add or remove detail only where it improves clarity. Fine strokes should be the least visible part of the drawing.
Common Mistakes
- Starting with fine detail. Without a form-first base, strand work cannot save the drawing.
- Uniform strokes. Same-length, same-angle strokes look like a comb pattern.
- Overusing the smudge tool. It softens, but it also flattens. Combine it with brushwork.
- One layer for everything. Mistakes become permanent, and color experiments get risky.
- Ignoring anatomy. Fur direction follows the skull and body. When the direction is wrong, the animal looks wrong.
Taking a Procreate Dog Into Motion
If you're a motion designer or animator, you might be drawing the dog as an asset for a title sequence, an explainer, or a character shot. A few preparation steps help:
- Export with layers intact. Keep the base, color, and fur passes separate so you can parallax or animate them in After Effects.
- Paint past the silhouette. Extend body areas beneath overlapping parts, like the ears over the head, so movement doesn't reveal gaps.
- Work at delivery resolution. Fine fur strokes are the first thing to degrade when scaled.
Fur is notoriously difficult to animate by hand. Redrawing thousands of strokes per frame produces flicker, and simple transforms on a flat illustration can feel stiff. Whatever tools you choose for the animation stage, your Procreate drawing remains the creative source, and the compositing workflow you already trust stays in place.
Quick Recap
- Gather a clear reference and set up a high-resolution canvas.
- Block in the darkest base color, then the main lights.
- Use a clipped layer to map color changes.
- Smudge in the direction of hair growth.
- Add a loose first texture pass with a sharp brush.
- Build clumps with Fine Hair, Short Hair, and Flowing Hair, dark to light, on separate layers.
- Add depth around the eyes, nose, and edges.
- Finish with fine technical pen strokes, erasing the stroke starts.
Practice on a simple shape like a tail or ear before tackling a full portrait. Once the layering rhythm feels natural, drawing convincing dog fur becomes much faster, and the layered files you produce are ready to move into animation.