How to Draw Chibi Procreate
StyleFrame Team8 min read
To draw a chibi in Procreate, start with a large circle for the head, reshape it with Liquify, add a small body that is roughly the same height as the head, and place oversized eyes low on the face using symmetry and guidelines. Build the character on separate layers (base, guidelines, line art, color, shading) so every piece stays editable. That layered structure also matters if you plan to animate the character later in After Effects or another compositing tool.
What Makes a Chibi a Chibi
Chibi is a stylized, super-deformed take on anime characters. Three traits define it, and every step below serves one of them:
- Proportion: The head is huge, often close to half the character's total height. The body is short and compact.
- Eyes: They're large and take up much of the face. Placing them low on the head makes the character read as cute.
- Soft shapes: Rounded forms dominate. Sharp angles are saved for specific expressions, such as angry, slanted eyes.
Keep these three in mind and you can adapt any tutorial, whether the character is a boy, a self-portrait, or a mascot for a motion piece.
Set Up Your Procreate Canvas
A square canvas of 2500 × 2500 px is a comfortable size for a single-character drawing. For a full-body character who needs room for hair and props, a tall canvas such as 2100 × 3250 px also works well. If the artwork will end up in a video timeline, think about your delivery format now. A larger canvas gives you room to crop and scale in After Effects without softening line work.
Then enable the drawing guide:
- Open the wrench menu and go to Canvas.
- Turn on Drawing Guide, then tap Edit Drawing Guide.
- Choose Symmetry for a mirrored face, or a 2D Grid if you want a proportion reference. A grid is helpful for body-to-head ratios.
Check that Drawing Assist is off on layers where you want freehand marks. It's useful for symmetrical elements, but it can fight you on organic details like hair.
Step 1: Draw and Shape the Head
Pick the Monoline brush from the Calligraphy set. It's a simple, consistent-width brush that suits constructing shapes. Draw a circle near the center of the canvas. If you hold your pen at the end of the stroke, Procreate snaps it into a clean shape. Resting a finger on the screen while holding can constrain it to a perfect circle.
Use Move/Transform with snapping on to center the circle. Fill it with a skin tone by dragging a color onto it. Then use Adjustments > Liquify in Push mode to refine it:
- Pull the chin down slightly to form a soft jaw.
- Nudge the sides to shape the face to your liking.
- Use a smaller brush size for fine adjustments to the jawline.
Liquify lets you try several variations in minutes. Don't aim for realism. A gently rounded, slightly squished circle is usually what you want.
Step 2: Block In the Body and Ears
Create a new layer below the head and use a slightly different skin tone so you can distinguish it while building. Draw a short neck and a compact torso, closing the shape at the top so you can fill it with color. On the same layer, add rounded ears at the sides of the head.
The body should be small. If the character looks awkward, shrink the body before changing the head. A body about equal to the head in height is a solid starting point, and you can make it even smaller for a stronger chibi look.
If you'll be animating later, consider putting the arms, legs, and head on their own layers from the start. It costs little now and saves you from painting hidden areas later.
Step 3: Add Face Guidelines
Create a new layer and pick a sketching brush such as the 6B Pencil. Draw a horizontal line across the middle of the face and a vertical line through the center. Holding at the end of the stroke and tapping a finger on the screen keeps these lines straight.
Place the eyes just below the horizontal line. In chibi, this low placement gives the forehead more room and increases the cute, childlike effect. The mouth is tiny, set well below the eyes, and the nose is often only a small dot or omitted entirely.
Keep guidelines on their own layer. You can lower their opacity or hide them once the features are placed, and they never contaminate your line art.
Step 4: Draw the Eyes and Facial Features
With symmetry on, draw one eye and watch it mirror to the other side. This is the fastest way to get balanced features. Build the eyes in layers:
- Base shape: a large rounded oval or rounded rectangle filled with the iris color.
- Pupil and shadow: a darker shape at the top of the iris to simulate the eyelid shadow.
- Highlights: one or two white shapes, placed in the same position on both eyes so the light direction reads consistently.
- Upper lid line: a slightly thicker stroke across the top of the eye, which adds weight and character.
Use Clipping Masks for shading inside the eye. A clipping mask restricts paint to the shape below it, so a gradient or shadow can never spill outside the iris.
For eyebrows and mouth, keep strokes simple. A small curve for a smile, a tiny open oval for surprise, a short slanted line for a brow. Expressions in chibi come from a few exaggerated marks, not from detail.
Step 5: Build the Hair
Hair is usually the biggest shape after the head, so treat it as a graphic mass first:
- Sketch the overall silhouette on a new layer above the head, covering the top and sides.
- Fill it with the base color on a separate layer.
- Add strands and a fringe with bold, curved shapes rather than individual hairs.
- Clip a new layer to the base for shadow shapes beneath the fringe, and another for highlights.
Round, flowing shapes keep the style cohesive. Hair that is too angular or too detailed will fight the simplified face.
Step 6: Line Art, Color, and Shading
Finish line art on its own layer with a brush that gives you some pressure response, like the Studio Pen. Many chibi artists use a slightly thicker outline around the outer silhouette and thinner lines inside. Colored line art, where the outline is a dark version of the fill rather than pure black, tends to feel softer and more cohesive.
For color, build a limited palette of five to eight swatches and save it in Procreate's Palettes panel. Then:
- Use Alpha Lock to recolor a flat layer without leaving its edges.
- Use clipping masks for shadows (multiply-style darker tones) and highlights.
- Add a soft blush on the cheeks with a soft airbrush on a clipped layer.
Keep shading simple: one shadow tone and one highlight tone per material is plenty.
Common Mistakes to Avoid
- Eyes too high: Moving them lower on the face fixes most "off" looking chibis.
- Body too large: Shrink it until the head clearly dominates.
- Too much detail: If the face needs lots of lines to read, the shapes aren't strong enough.
- Flattened layers too early: Merge only at the very end, and keep a layered copy.
- No reference: Even stylized work benefits from a pose or hairstyle reference.
Taking Your Chibi Into Motion
Once the drawing is finished, many motion designers want to see it move. Procreate has its own Animation Assist, but a professional pipeline often goes through After Effects, Premiere Pro, or Nuke for compositing and finishing. A few prep habits make that handoff easier:
- Name your layers (head, eyes, mouth, hair front, hair back, body).
- Export as a layered PSD for rigging in After Effects, or as transparent PNGs for individual pieces.
- Keep resolution high enough to scale up in a comp without visible softness.
If you want to explore motion without rigging everything by hand, is an AI video and motion tool built for artist-directed control rather than one-click output. You can use your finished chibi as a reference in several ways:
- Frames-to-Video: Set keyframes, such as a neutral pose and a smiling pose, and Styleframe generates the motion between them, so you decide the start and end of the action.
- Restyle and Ink-and-Paint: Use reference-driven style transfer to carry your line and color treatment onto other footage or frames, so new material matches your drawing.
- 2D-to-3D and Turntable: Turn the flat character into a 3D form and generate a turnaround to check how the design holds up from other angles.
- Remove Background: Isolate the character cleanly for compositing.
- 4K Upscale: Bring the final output to production-ready resolution.
Every generation is driven by your reference images, clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier versions. Styleframe exports image sequences, which you can bring into a compositor such as After Effects or Nuke. Your compositing workflow stays intact: Procreate for the character design, Styleframe for generating motion and variations, and your usual compositor for the final grade, effects, and delivery.
Practice Plan
To get comfortable with the style, try this progression:
- Draw five chibi heads using the same circle-and-guideline method with different expressions.
- Draw a full-body chibi using a single base and swap hair and clothing.
- Create a three-pose set (neutral, happy, surprised) on a consistent layer structure.
- Bring those poses into your motion tool of choice and test a short loop.
The workflow is the same each time: shape, guide, features, color, then export with layers intact. Once those steps are automatic, you can spend your time on the parts that carry personality: expression, silhouette, and motion.