How to Draw Cartoon Procreate
StyleFrame Team8 min read
To draw a cartoon in Procreate, build the character from basic shapes on a sketch layer, ink clean lines on a separate layer, drop flat colors under the lines, then add shadows and highlights on clipped layers. Work on a large canvas (2500 × 2500 px is enough for most characters, and 4000 px or more gives you room to crop and scale), and keep every element on its own layer. That structure matters most if the drawing will later be animated or composited.
Set Up the Canvas and Brushes
Start with an RGB canvas, since you'll almost certainly deliver to screen. A square 2500 × 2500 px canvas works well for a single character. If you plan to push the art into a motion project, go larger so you can scale it in After Effects without softening the linework.
Fill the background with a mid-tone color instead of staring at white. It saves your eyes and makes light colors easier to judge. Then pick a small brush kit:
- A sketching pencil. The 6B pencil in the Sketching set keeps early shapes loose.
- An inking brush. The Studio Pen (Inking set) or the Monoline brush (Calligraphy set) gives consistent, controllable lines.
- A shading brush. Anything with soft or textured edges will do. Keep it simple at first.
Load or build a palette before you start drawing. Five to eight colors (skin or fur, a secondary color, an accent, a dark, a light) keep a cartoon cohesive and make later recoloring easy.
Block In the Character with Basic Shapes
Cartoon characters read clearly because they are built from simple forms. Don't try to draw the finished outline in one pass. Instead:
- Draw a circle for the head. Hold your pen in place at the end of the stroke and Procreate's QuickShape snaps it to a clean circle. A second finger on the screen constrains the shape to a perfect circle.
- Add a smaller circle or oval for the snout or jaw, and an oval or bean shape for the torso.
- Place simple lines or ovals for limbs, hands, feet, and tail.
- Check the silhouette. If you filled the whole thing with black, would you still recognize the character? If not, exaggerate the shapes until you would.
Don't worry if the shapes look awkward. This stage exists to get the idea out of your head. Lower this layer's opacity once you're happy with it so it stays out of your way.
Fix Proportions Without Redrawing
Procreate makes proportion changes cheap. Use Select in freehand mode to loop a single body part, then Transform to resize or reposition it. For whole-face adjustments, the Liquify tool (Push mode, with Distortion and Momentum at none) lets you flatten the sides of a head, pull out cheeks, or sharpen a chin.
If a sketch goes wrong entirely, a three-finger scrub across the canvas clears the layer instantly. Starting over is often faster than correcting a bad base.
Use Guides for Facial Features
For a cute, readable face, place the eye line a little below the halfway point of the head. Make a new layer and draw horizontal guide lines for the eyes, the mouth, and the brows. Holding the pen in place and tapping a finger straight-lines each stroke. Larger eyes set low on the head push the character toward a younger, friendlier look. Smaller, closer-set features read as more mature or comedic.
For symmetrical characters, switch on Drawing Guide → Edit Drawing Guide → Symmetry from the Canvas settings. Any layer marked as Assisted will mirror your strokes, which makes faces, masks, and front-facing characters much faster.
Ink Clean Line Art
Create a new layer above the sketch and pick your inking brush. Trace the forms with confident, continuous strokes. Some practical rules:
- Vary line weight on purpose. Slightly heavier lines on the underside of forms and thinner lines on top give the drawing weight without any shading.
- Close your shapes. Gaps in the outline make flat-color filling messy. Overlap line ends slightly or fix gaps with a small brush afterward.
- Keep the stabilization on. Raising the brush's Streamline setting smooths wobbly strokes, which is useful for a clean cartoon look.
- Split the lines across layers if animation is the goal. Putting the head, arms, legs, and tail on separate line layers is tedious up front but makes rigging far easier later.
Once the line art is done, hide or delete the sketch layer. If you want to keep it as a reference, set it to Multiply and drop its opacity so it doesn't show through the final art.
Add Flat Colors
Flat colors are the foundation of cartoon rendering, so keep them on their own layer beneath the lines.
- Make a new layer under the line art.
- Drag a color from the color swatch and drop it into a closed shape. Procreate fills the area instantly. If the fill leaks, close the gap in the line art.
- Repeat for each major color area, ideally on separate layers: skin, clothing, hair, accessories.
Another quick approach is to draw a rough outline of the entire character in one color, fill it, and then use that layer as a base for clipping masks. Details like a lighter belly or contrasting toenails can be added in a clipped layer so color never spills outside the silhouette.
To match a color that already exists in your piece or a reference image, tap and hold the canvas to sample it, then save it to your palette.
Shade and Highlight with Clipping Masks
Cartoon shading is usually graphic and restrained: one shadow tone, one highlight tone, and sometimes a rim light.
- Add a new layer above a flat-color layer and choose Clipping Mask so painting stays inside the shape below.
- Pick a darker, slightly more saturated version of the base color. Pure black or gray shadows tend to look dirty.
- Decide on a single light direction and paint shadows on the opposite side of every form.
- Set the layer to Multiply for shadows. Use Add or Screen for highlights, and adjust opacity to taste.
- Add small highlight shapes in the eyes, since they bring a character to life more than almost anything else.
Finish with a simple background, such as a flat color, a gradient, or a few shapes for the ground, so the character has something to sit in. Keep it on its own layer group so you can remove it later.
Speed Up the Workflow
A few Procreate habits save time on every drawing:
- Reference import. Use Actions → Add → Insert a Photo to bring in a reference image, then trace on a layer above it. Tracing styles you admire builds muscle memory fast.
- Layer discipline. Name layers, group by body part, and lock or hide what you're not touching. This pays off the moment someone requests a revision.
- Transform for composition. If the drawing sits too near the edge, select everything and move it instead of redrawing.
- Brush stamps and character kits. Pre-made face shapes and feature stamps can help you iterate quickly, but treat them as a starting point so your characters don't look generic.
Prepare the Art for Motion Work
If the character is headed into a video or animation project, set it up before exporting:
- Export a layered PSD so After Effects or Photoshop can read each part separately. Check that clipping masks and blending modes survive the round trip, because they don't always translate exactly.
- Export transparent PNGs of individual parts if you plan to rig them with puppet pins or in a tool like Duik.
- Keep the canvas oversized and leave empty margin so limbs can rotate without clipping.
- Match your delivery color space. If you work on an RGB canvas, confirm the color profile before dropping art into a color-managed project.
Procreate also has its own Animation Assist mode for quick frame-by-frame loops, which is fine for rough tests or simple GIFs. For anything with camera moves, compositing, or longer sequences, most professionals bring the art into a proper motion pipeline.
Where Styleframe Fits After the Drawing
Once you have a finished Procreate character, Styleframe can help extend it into motion, using your own images, clips, and keyframes as references. Your original drawing stays the starting point, and anything generated from it becomes one more element in your composite rather than a replacement for your workflow.
Common Mistakes to Avoid
- Skipping the silhouette check. A character with a muddy outline will be hard to animate and harder to read at small sizes.
- Merging layers too early. Flattening line art and color together removes your ability to recolor, fix gaps, or rig parts.
- Overworking the sketch. The sketch is scaffolding. If you're polishing it, you're probably inking too late.
- Using too many colors. A tight palette makes cartoons look intentional and makes lighting consistent.
- Ignoring export needs. If the art is going to After Effects, decide on layer structure and canvas size before you start drawing, not after.
Final Thoughts
Drawing a cartoon in Procreate comes down to a repeatable sequence: simple shapes, clean lines, flat colors, restrained shading. Keeping each stage on its own layer is what turns a nice illustration into a production asset. From there, you can rig it in After Effects, extend it with reference-driven tools like Styleframe, or bring it into 3D, with your original drawing remaining the source of truth.