How to Draw Cartoon Characters Procreate
StyleFrame Team8 min read
To draw a cartoon character in Procreate, build the figure from simple shapes (circles, ovals, a few guide lines), refine the silhouette with Liquify, ink clean line art on its own layer, and fill flat colors underneath. Keep every body part on a separate layer so the character can be exported and rigged later. Procreate's QuickShape, drawing guides with symmetry, ColorDrop fills, and clipping masks do most of the heavy lifting. If the character is headed for motion work, plan the file structure from the start.
Set Up the Canvas for the Job
Some beginner tutorials use a 2500 × 2500 px square canvas, which is fine for a sticker or avatar. If the character will end up in a comp, set up the canvas differently:
- Size for the delivery format. For a character that will be animated in After Effects, draw large enough that you can scale up without softness. A canvas at or above your comp resolution is a safe starting point.
- Check the color profile. Pick the profile in Canvas settings before you start, and keep it consistent with your comp's working space so your palette doesn't shift on import.
- Pick a background color, not white. A mid-tone or tinted background is easier on the eyes and helps you judge your colors. Hide it before export so you get transparency.
- Make a palette first. Procreate palettes are quick to build, and a small locked set of colors keeps a character consistent across poses.
Start With Construction Shapes
Cartoon characters read well when the underlying shapes are simple and deliberate. Start loose, with a sketching brush such as the 6B Pencil, on its own layer.
- Draw a circle for the head. Hold your pen at the end of the stroke and Procreate snaps it to a perfect circle with QuickShape. Tapping a second finger while holding constrains lines and shapes further, which is useful for horizontal guide lines.
- Add secondary shapes. A smaller circle for a snout, an oval for the torso, and simple tubes or ovals for limbs. These shapes can look awkward at this stage. You're only getting the idea out of your head.
- Center it. Use Transform with snapping turned on to place the head on the canvas's vertical center.
If your character is symmetrical, such as a front-facing head, turn on the drawing guide. Go to Actions > Canvas > Drawing Guide > Edit Drawing Guide > Symmetry, then mark the layer as Drawing Assist. Whatever you draw on one side mirrors to the other, which saves time and keeps features even.
Shape the Head With Liquify
Circles make dull heads. Open Adjustments > Liquify and use Push to reshape the form:
- Pull the bottom down into a chin or a softer jaw.
- Flatten the sides slightly for a more designed, less ball-like silhouette.
- Pull the cheeks out for a younger, cuter read, or narrow the face for a sharper character.
Adjust brush size in Liquify to control how broad the deformation is. A large size gives smooth, sweeping changes, and a small size gives tighter local corrections. Keep Distortion and Momentum at zero for predictable results.
Because Liquify is destructive on that layer, duplicate the layer before big changes. You'll thank yourself when a client asks for a rounder head three rounds in.
Place Features Using Cartoon Proportions
A realistic face puts the eyes at the vertical midpoint of the head. Cartoon characters often break this rule on purpose.
- Lower the eyeline. Placing the eyes below the halfway point gives a larger forehead and a younger, cuter look.
- Find the nose and mouth positions. Draw a guide line halfway between the eyeline and the chin for the nose or mouth, then another line above the eyes for the brows.
- Exaggerate the eyes. Big, simplified eyes communicate emotion at small sizes. That matters if the character will end up on screen at a fraction of canvas size.
- Vary the mouth shape set. Draw a few mouth shapes now (closed, open, smile, "O"). You'll reuse them for lip-sync later.
Guide lines belong on a dedicated layer you can hide. Delete or hide them before final export.
Build the Body and Silhouette
Squint at your sketch, or fill it with a solid color. If the silhouette is readable, with a clear head, torso, and limbs, the character will work in motion. If it isn't, fix the proportions now rather than during animation.
Useful checks:
- Shape language. Round shapes feel friendly, squares feel stable, and triangles feel sharp or dangerous. Pick a dominant shape and let it drive the design.
- Head-to-body ratio. Smaller bodies under big heads push toward cute. Longer bodies push toward comedic or heroic.
- Hands and feet. Simplify them. Three or four fingers and mitten-like feet are acceptable cartoon conventions and are much easier to animate.
Procreate's Select and Transform tools are good for proportion fixes. Lasso a body part, then resize or move it without redrawing. Reference imagery can be imported through Actions > Add > Insert a Photo and traced on a separate layer to build style knowledge.
Ink the Line Art
Create a new layer above your sketch, drop the sketch's opacity, and set it to Multiply if it helps you see it. Then ink with a monoline brush or a studio pen from the Inking set.
- Use a consistent line weight for a clean, graphic look, or slight pressure variation for a more hand-drawn feel.
- Close your shapes. Gaps in line art make ColorDrop fills leak across the whole canvas.
- Use the StreamLine setting on your brush to smooth shaky strokes.
- Undo aggressively. A two-finger tap is faster than erasing.
If you plan to rig the character, ink body parts as separate pieces that overlap where joints will go. An arm drawn only up to the shoulder edge will show a gap when it rotates, so extend it under the torso.
Flat Colors, Clipping Masks, and Shading
Put flat colors on layers beneath the line art. Drag a color from the palette into a closed shape to fill it with ColorDrop. If the fill is incomplete or spills, adjust the threshold by holding your finger down after dropping.
Then add detail without touching the base fill:
- Create a new layer above the base color and turn on Clipping Mask. Anything you paint stays inside the shape below. This is how you add belly patches, blush, or toenails in a different color.
- Add shadows on a Multiply layer and highlights on an Add or Overlay layer, both clipped.
- Keep shading simple and cel-like, with a hard edge and one or two tones. Heavy gradients are harder to animate convincingly and can clash with a flat motion style.
Organize Layers for Animation
How you name and arrange layers decides how painful the handoff is later. A good structure looks like this:
- Head, eyes, mouth set, brows, hair front, hair back
- Torso, upper arms, forearms, hands, thighs, shins, feet
- Accessories and props on their own layers
- Line art and color grouped per body part, or merged per part if you want fewer layers
Name every layer. Export as a layered PSD for After Effects, or as transparent PNGs if you need individual assets. Procreate's Animation Assist can handle quick frame-by-frame tests, but for production work, many artists move the character into After Effects, Blender, or a dedicated rigging tool.
Where Styleframe Fits After the Drawing
Once you've designed the character, the next problem is usually getting it into motion or into other styles and angles without redrawing everything. Styleframe is an AI video and motion tool built for artist-directed control, and it's most useful when you already have approved artwork to work from. Every generation is driven by your own reference images, video clips, and keyframes.
Practical uses for a Procreate character:
- Frames-to-Video. Use keyframes of your character in different poses and let Styleframe generate the movement between them. You control the start and end states.
- Restyle and Ink-and-Paint. These are reference-driven style transfer tools. Supply a reference for the look you want, such as a line weight or paint texture, and apply it to footage or frames of your character.
- 2D-to-3D and Turntable. Convert a flat character design into a 3D representation and generate a turnaround for model-sheet purposes or Cinema 4D and Blender reference.
- Remove Background. Isolate a character from a painted or photographed background for compositing.
Your compositing workflow stays where it is. Styleframe adds generation and style tools around a design you've already controlled, rather than replacing the drawing.
Common Mistakes to Avoid
- Flattening too early. Merge layers only on a duplicate file. Keep an editable master.
- Skipping the silhouette check. If a fill-only version doesn't read, line art won't fix it.
- Leaving gaps in outlines. This breaks ColorDrop fills.
- Drawing at low resolution. Scaling up in After Effects will soften your edges.
- Overly complex designs. Every extra detail has to be redrawn or tracked in each frame or pose. Simplify early.
- No expression or pose set. Draw at least a neutral pose, a few mouth shapes, and a few eye states before calling the character finished.
A Simple Workflow Summary
- Set canvas size, color profile, and palette.
- Sketch with circles, ovals, and guide lines.
- Refine the head with Liquify and symmetry.
- Place features using cartoon proportions.
- Check the silhouette.
- Ink on a separate layer, closing all shapes.
- Fill with ColorDrop, then add detail on clipped layers.
- Name and organize layers by body part.
- Export a layered PSD or PNG set for animation.
- Extend the design with tools like Styleframe for motion, restyling, or 3D reference as the project requires.
Following this order keeps the character editable and ready for production, whether it ends up as a sticker, a rigged puppet in After Effects, or a source design for a stylized sequence.