How to Draw Calligraphy on Procreate
StyleFrame Team9 min read
To draw calligraphy in Procreate, use an Apple Pencil with a pressure-sensitive brush, then press harder on downstrokes and lighter on upstrokes to get the thick-and-thin contrast. Add a moderate amount of StreamLine stabilization to smooth curves, practice basic strokes on a guideline layer, and build each word on its own layer. When the lettering is done, export it as a transparent PNG or an animated sequence so it can move into your motion pipeline.
What You Need Before You Start
Procreate's full app runs on iPad, so you need an iPad that supports Apple Pencil. A finger works for rough sketching, but calligraphy depends on pressure sensitivity, and the Pencil is the closest digital match to a pointed pen or brush pen.
Two other things help:
- A matte screen protector (optional). Many letterers find bare glass too slippery for controlled hairlines. A textured protector adds friction.
- A calligraphy-capable brush. Not every lettering brush produces real thick-thin contrast. Monoline brushes give uniform width, which suits casual hand lettering but not traditional script.
Understand How Thick and Thin Strokes Work
Pointed-pen calligraphy is built on a simple rule. Pressure widens the stroke, and release thins it. On paper, the nib's two tines spread as you press, letting more ink through. With no pressure you get a hairline.
In practice:
- Downstrokes (pulling toward you) get pressure and become thick.
- Upstrokes (moving away) stay light and become thin.
- Transitions at the tops and bottoms of curves should ease in and out rather than snap.
This logic carries over to the Apple Pencil, so it is worth internalizing before you touch brush settings. If you only copy letter shapes without the pressure logic, your lettering will look like outlined type instead of script.
Set Up Your Canvas
A few decisions up front save rework later.
Canvas size. If the lettering will end up in a video comp, create the canvas at the resolution you will need, or larger. A 3840×2160 canvas gives you room to scale in After Effects without softening your strokes. Lettering for print or social can use a smaller canvas.
Background. Work on a light background while learning, since it makes hairlines easier to judge. You can hide the background layer at export for transparency.
Guides. Turn on the drawing guide in Procreate's canvas settings. A 2D grid with a small grid size gives you a baseline, x-height, and ascender lines. Calligraphy depends on consistent slant and spacing, so a guide pays off. For slant, draw a few angled lines on a separate layer and lower its opacity.
Choose or Build the Right Brush
Procreate ships with stock brushes, and plenty of free and paid sets exist. Start with a stock brush to learn how pressure behaves, then customize.
Match the Brush to the Style
"Calligraphy" is an umbrella term, and different styles need different tools:
- Modern brush script: a round, tapered brush with moderate pressure response, similar to a brush pen.
- Copperplate or pointed-pen script: a high-contrast brush with a sharp, narrow tip and a strong response to pressure.
- Blackletter or broad-edge scripts: a flat, angled shape that holds a constant nib angle, where contrast comes from direction instead of pressure.
Customize in Brush Studio
Duplicate a brush before editing so the original stays intact. Open Brush Studio and focus on a few areas:
- Shape: the stamp that defines the brush tip. A teardrop-like or pointed shape suits brush pen styles. A thin rectangle at an angle suits broad-edge.
- Stabilization and StreamLine: controls smoothing along the stroke. Raising the amount smooths curves.
- Apple Pencil settings: the pressure curve and size/opacity response. Lowering the minimum size makes hairlines finer, and raising the maximum increases contrast.
- Properties: minimum and maximum brush size.
You can leave the grain alone for clean lettering. Textures matter for dry-brush effects, not for crisp script.
Adjust the pressure response until light pressure produces a fine line and firm pressure a clear thick one, without needing to dig into the glass.
Tame Shaky Curves with Stabilization
Procreate is sensitive, and curves tend to wobble at first. Increase StreamLine on the brush to smooth them. A mid-range value is often a good starting point. Going too high makes the stroke lag behind your hand, and your handwriting stops resembling what appears on screen.
If a brush feels like it is fighting you, lower the amount. For small, quick writing, less stabilization usually behaves better. For large, sweeping flourishes, more helps.
Practice the Fundamentals
Before writing words, spend a few sessions on drills. These train the muscle memory that makes finished lettering look fluid.
- Basic upstrokes and downstrokes. Draw rows of parallel slanted lines, thin up and thick down, with consistent spacing and angle.
- Ovals and compound curves. Fill a line with ovals, then loops. Watch where thickness swells and where it tapers.
- Entry and exit strokes. Practice the small hairline that starts and finishes each letter.
- Letter families. Group letters by shared shape (a, c, d, g, q, o share an oval) instead of going A to Z.
- Connections. Practice joining letters smoothly, since connections make script read as script.
Get Clean Stroke Endings
A common frustration is the end of a stroke, where you expect a flat finish and get a bump or a point. Two habits help:
- Pause briefly before lifting. A small hold at the end of a downstroke often produces a flatter termination than lifting as you move.
- Lift in line with the stroke. Lifting straight up or slightly back into the stroke avoids the little tail created by pulling away.
The same applies to starts. A brief pause before dragging avoids a tapered, pointy beginning when you want a blunt one. If you do want a gradual swell, use gradual pressure instead.
Build a Piece Step by Step
With drills done, work through a real word or short phrase.
- Thumbnail on a sketch layer. Write the text roughly in a bright color at low opacity. Think about composition: baseline, arc, and where flourishes can sit.
- Lower the sketch opacity and add a new layer for inking.
- Ink one word per layer where you can. This lets you reposition, resize, or redraw words without disturbing the rest.
- Use Undo liberally. Redrawing a single stroke is faster than fixing it.
- Rotate the canvas so the stroke direction feels natural for your hand. Most calligraphers rotate constantly.
- Refine spacing. Select a word layer and nudge it with the Transform tool to even out gaps.
- Add flourishes last. Extend terminal strokes and swashes once spacing is settled, so they do not collide with other letters.
Fix Mistakes Without Redrawing
Use the Eraser with the same brush so edges match the original stroke shape. For smoothing, the Smudge tool can soften small bumps, though it can also destroy tapering, so use it lightly. For larger problems, redraw the stroke on a new layer and erase the bad one.
Export for Motion Work
For motion designers, the lettering is usually the start of a piece, not the end.
Static export. Hide the background and sketch layers, then share as PNG, which keeps transparency. For vector workflows, you can trace the PNG in a vector tool, but heavy tracing can alter fine hairlines. Check the result at full size.
Animated export. Procreate's Animation Assist lets you build frame-by-frame animation, such as handwriting reveals, with each layer as a frame. Export options include animated formats and image sequences. A PNG sequence with transparency can be brought into your compositing or editing software.
Write-on in After Effects. A common alternative is to export the lettering as a PNG or vector and create the reveal in After Effects with a mask or Stroke effect. That approach is easier to retime, but the reveal will not follow the pressure and speed of a real stroke unless you build it carefully. Redrawing strokes in order in Procreate preserves the natural rhythm.
Where Styleframe Fits in a Calligraphy Workflow
Once your lettering exists as clean artwork, you may want to push it further than a flat PNG. is an AI video and motion tool built for artist control rather than one-click output. Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier work.
A few practical uses for calligraphy:
- Restyle and Ink-and-Paint. Use reference-driven style transfer to give lettering a different material look, such as brushed ink or painted texture, while using your own reference frames to steer the result.
- Frames-to-Video. Set keyframes from your lettering stages, for example an empty frame and a finished word, and let the tool generate the motion between them, guided by those frames.
- 2D-to-3D and Turntable. Turn flat lettering into a dimensional object and rotate it for title treatments.
- Remove Background and 4K Upscale. Clean up source artwork and deliver production-ready 4K output.
Styleframe exports image sequences, so the results drop into After Effects or Nuke, where you keep control of compositing, color, and timing. Your Procreate artwork remains the source of truth, and the AI step extends it rather than replacing your hand-drawn lettering.
Common Mistakes to Avoid
- Pressing too hard everywhere. If every stroke is thick, you lose the contrast that defines calligraphy. Keep upstrokes light.
- Writing too small. Large lettering on a zoomed canvas is easier to control, and you can scale down afterward.
- Skipping drills. Jumping to flourishes without basic strokes produces shaky, uneven work.
- Over-stabilizing. Excess smoothing makes strokes feel mushy and disconnected from your hand.
- Flattening too early. Keep word layers separate until the piece is final, especially if you plan to animate.
- Ignoring export resolution. Draw large enough for the biggest size the piece will appear at.
Final Checklist
- Apple Pencil and a calligraphy-suitable brush, matched to your script style
- Pressure curve and StreamLine tuned so hairlines and thick strokes both feel controlled
- A drawing guide for baseline, x-height, and slant
- Drills before words, and one word per layer
- Clean stroke starts and ends, using brief pauses
- Transparent PNG or PNG sequence export at a resolution suited to your comp
Calligraphy in Procreate comes down to pressure control, a well-tuned brush, and repetition. Once those three click, your lettering is ready for After Effects, Premiere Pro, or any other tool in your pipeline.