How to Draw Bricks in Procreate
StyleFrame Team9 min read
To draw bricks in Procreate, build one brick on a square canvas with the 2D Grid drawing guide on, then duplicate it into a row (a "course"). Offset every second course by half a brick width, using Transform with Snapping and Magnetics, to get a running bond. For angled walls, switch to the Perspective guide. Finish with mortar lines, noise, and color variation on separate layers so you can export a clean, layered file.
Set Up the Canvas Before You Draw Anything
Brick walls expose sloppy setup immediately, because small spacing errors repeat across dozens of bricks. Spend two minutes on the foundation.
- Canvas: Start with a square canvas such as 2048 × 2048 or 4096 × 4096 px if your device allows it. Square sizes make tiling in After Effects, Cinema 4D, or Blender much easier. Maximum size and layer count depend on your iPad's memory, so check the canvas size screen before committing.
- Resolution: 300 DPI is fine for print, but for video work, pixel dimensions matter more than DPI.
- Drawing Guide: Open Actions > Canvas > Drawing Guide > Edit Drawing Guide. Choose 2D Grid, then adjust grid size until one cell matches a convenient unit of your brick, for example one cell equals half a brick length.
- Drawing Assist: Turn this on for the layer you're drawing on if you want strokes to snap to the grid while you draw.
- Color profile: If the texture is going into a compositing pipeline, create the canvas in RGB and keep an eye on the color profile so the result doesn't shift when you import it.
Decide your brick proportions now. Real bricks are noticeably longer than they are tall. Pick a ratio and stick to it so every course feels consistent.
Method 1: Draw One Brick and Build a Course
This is the most controllable method and the one you'll use most often.
- Make the brick shape. Create a new layer. Use the Selection tool in Rectangle mode, drag out a rectangle that fits your grid cells, and fill it by dragging a color into it (ColorDrop). Alternatively, draw a rectangle with a hard brush and hold at the end of the stroke to trigger QuickShape.
- Soften the shape. Real bricks rarely have razor-sharp corners. Use a small, hard eraser at the corners, or use Selection > Feather lightly before filling.
- Duplicate. Swipe left on the layer and tap Duplicate. Open Transform with Magnetics and Snapping on, then drag the copy sideways until it sits next to the first with a gap that will become the mortar joint.
- Merge and repeat. Merge the two bricks, duplicate the pair, and snap again. Doubling the group each time (2, 4, 8) fills a row in a few moves.
- Duplicate the whole course. Once a row spans the canvas, duplicate it and move it down by one brick height plus the joint gap.
Keep a "master brick" layer hidden at the bottom of your stack. If you decide to change proportions or color later, you'll want a clean source.
Method 2: Create a Running Bond Offset
Many brick walls use a running bond, where each course is shifted by half a brick. The same logic powers half-brick repeat patterns in surface design.
- With your first course complete, duplicate it for the second row.
- In Transform, move the duplicate down one course height with Snapping on.
- Nudge it horizontally by exactly half a brick length. If your grid cell equals half a brick, this is a one-cell move and Snapping handles the precision.
- A half-brick will hang off one edge. Select that overhanging brick, cut it, and paste it on the opposite edge so the row wraps. This is what keeps the texture tileable.
- Repeat for every second course, or build two courses (A and B) and duplicate that pair down the canvas.
Zoom in and check the seams after each move. The orange guide lines that appear during snapping are helpful, but a one-pixel drift is only obvious when you view the finished wall.
Method 3: Draw Bricks in Perspective
If you're painting a wall receding into the distance, such as a matte painting, a style frame, or a background plate, use the Perspective guide instead.
- Open Drawing Guide > Edit Drawing Guide > Perspective, then tap to place a vanishing point. For a flat wall at an angle, one point is usually enough. Add a second for a corner.
- Turn on Drawing Assist. Horizontal mortar lines will now converge on the vanishing point as you draw.
- Draw the first course with a thin brush, then draw vertical brick edges. Remember that vertical edges stay vertical in a one-point or two-point setup, while their spacing compresses as distance increases.
- Alternatively, build a flat wall using Method 1 or 2, flatten it to one layer, and use Transform > Distort or Perspective Warp-style adjustments to fit it onto a plane. This is faster, but check that the brick spacing tapers naturally.
For an environment you'll later build in 3D, skip perspective drawing altogether. A flat, tileable texture mapped to geometry in Cinema 4D or Blender will give you correct perspective for free.
Add Mortar, Texture, and Wear
Flat rectangles don't read as brick. The character comes from variation, so do it on separate layers.
- Mortar layer: Place a layer beneath your bricks and fill it with a mid-gray or warm tan. The gaps between bricks reveal it. This is easier to adjust than drawing joints on top.
- Color variation: Lock the brick layer with Alpha Lock, or use a Clipping Mask layer above it. Paint loose patches of slightly warmer, cooler, lighter, and darker tones using a large textured brush at low opacity. Randomize which bricks get which patch.
- Surface grain: Add a clipped layer set to Multiply or Overlay and paint with a rough, speckled brush. You can also use Adjustments > Noise, then reduce the layer's opacity.
- Edge wear: On another clipped layer, use a small chalky brush to lighten the corners and edges of a random selection of bricks.
- Cracks and stains: Use a thin pencil-style brush for hairline cracks. Use a soft brush on Multiply for water stains running down from above.
- Depth: Duplicate the mortar layer, shift it by a pixel or two, darken it, and blur slightly for a simple shadow in the joints.
Resist the urge to make every brick unique by hand. Vary a minority of them noticeably, and leave the rest close to the base. Controlled variation reads as realistic, while heavy variation looks like patchwork.
Turn Your Bricks Into a Reusable Brush
If you'll be drawing many walls, a brush saves time. Draw a single brick or a small tileable section on a square canvas in black and white. Open the Brush Library, tap +, and import the artwork as a Shape Source (one brick per dab) or Grain Source (a fixed brick pattern that fills any area). Then adjust spacing, jitter, and rotation in Brush Studio. Keep jitter low if you want straight courses, and increase it for rubble or crumbling masonry.
Export for After Effects and 3D
How you export depends on where the bricks are going.
- PSD: Keeps layers intact. After Effects imports PSD files as a composition with editable layers, so you can animate wear or lighting independently.
- PNG: Best for a flattened texture with transparency.
- Separate passes: Export mortar, color variation, and wear layers as individual images. In Cinema 4D or Blender, these can feed color, roughness, and bump channels. Convert a grayscale version of your brick layer to a height map by blurring it slightly and inverting the mortar.
- Tile test: Before finalizing, place the texture in After Effects with the Motion Tile effect, or in a 3D material with repeating UVs, and check for visible seams.
Bringing Drawn Bricks Into Motion
A hand-drawn brick wall is a still. Getting it into a shot usually means camera moves, parallax, or a stylized look applied across footage.
Styleframe is an AI video and motion tool built around artistic control, and it can extend a Procreate-drawn wall into motion without handing the look over to a black box. A few practical uses:
- Frames-to-Video: Use your drawn wall as a keyframe, and a second drawing (say, the same wall at dusk or partially collapsed) as another. Generation is driven by those frames, so you decide the start and end states.
- Restyle: Use your brick drawing as a style reference so live-action or 3D-rendered footage takes on your painted look. Because it's reference-driven, the result follows your art rather than a generic preset.
Styleframe can export image sequences, which you can bring into your compositing software. Your compositing workflow stays where it is. Styleframe adds a controllable generation step in front of it.
Common Mistakes to Avoid
- Uneven joints: Skipping Snapping and nudging by eye leads to gaps that grow across the wall. Use the grid.
- Too-perfect repetition: Identical bricks create obvious tiling. Vary color and wear on separate layers.
- Drawing joints on top of bricks: It makes edits painful. Keep mortar as its own base layer.
- Ignoring the wrap: If the texture will repeat, every edge element needs a matching counterpart on the opposite edge.
- Working too small: A 1024 px texture stretched across a 4K frame looks soft. Draw at the size you'll need, or larger.
FAQ
What's the fastest way to draw a full brick wall in Procreate? Draw one brick, duplicate it with Snapping on to fill a course, then duplicate courses with a half-brick offset. Doubling groups of bricks is quicker than copying one at a time.
Can I make the brick pattern seamless? Yes. Move any brick that overhangs one edge to the opposite edge so the pattern wraps, then test it with a tiling effect in your compositing or 3D software.
Should I draw in perspective or use a flat texture? Use the Perspective guide for a one-off painted scene. For anything that will be mapped onto geometry, a flat tileable texture is more flexible.
Can I animate the result? Export layers as a PSD and animate them in After Effects, or use a keyframe-driven tool like Styleframe to generate motion between drawn states.