How to Draw Blood Procreate
StyleFrame Team8 min read
To draw blood in Procreate, paint the shape on its own layer in a dark, slightly desaturated red, then add shading with a clipped Multiply layer and a few sharp highlights on a separate layer to make it look wet. Vary the edges, thickness, and spatter size so no two drops match, and use a dedicated blood brush set if you want textured spray and drips quickly. The same layered file can later be exported with transparency and animated in After Effects or another compositor.
What Makes Blood Look Believable
Most unconvincing digital blood comes from three mistakes: a flat, saturated red, uniform shapes, and no sense of wetness. Fix those and the rest is polish.
- Color shifts with thickness. Thin films look brighter and more translucent. Pools and thick drips look darker and heavier. Dried blood moves toward brown and near-black.
- Surface tension shapes everything. Drops form rounded beads, drips have a bulb at the bottom, and spatter leaves tiny satellite droplets around a main impact.
- Fresh blood is glossy. Wetness reads through small, crisp specular highlights, not a general glow.
- The surface matters. Blood beads on glossy skin, soaks into fabric, and spreads on paper. Decide what it's landing on before you paint.
Set Up Your Procreate Canvas
Work at a resolution you'd be comfortable using in a composite. If the blood is headed to video, a canvas that matches or exceeds your timeline resolution avoids soft edges later. Keep these layers separate from the start:
- Background or reference layer: the skin, wall, cloth, or surface the blood sits on.
- Base blood layer: flat shapes only.
- Shadow layer: clipped to the base.
- Highlight layer: clipped or free-floating.
- Spatter/detail layer: the small stuff you may want to move or delete independently.
Separate layers are the difference between a one-off illustration and an asset you can reuse, recolor, and animate.
Step 1: Choose a Palette
Skip pure red. Start with a deep, slightly desaturated red as the mid-tone and build a small palette around it:
- A darker crimson or maroon for shadows and thick areas.
- A brighter, warmer red for thin, translucent edges.
- A near-black red-brown for dried blood and contact shadows.
- Off-white (not pure white) for highlights.
Store these in a Procreate palette so you don't drift in color as you work. If the blood will sit on skin, sample from the skin to check that the red doesn't look pasted on. Colors that look right on a white canvas often look wrong on a warm skin tone.
Step 2: Block In the Base Shapes
Create a new layer and paint flat shapes with a hard-edged round brush or inking brush. Think in terms of how the liquid behaves:
- Drops: a rounded bead, slightly flattened where it rests on a surface.
- Drips: a thinner trail with a heavier bulb at the end, and slight width variation along the path.
- Pools: an irregular blob with soft, rounded lobes, not a perfect ellipse.
- Smears: a dragged shape with streaky, directional edges.
Turn on Procreate's StreamLine for clean drip lines, and use the Smudge tool sparingly to pull a trail. Avoid symmetry. Asymmetry is the quickest way to make shapes read as organic.
Step 3: Add Depth With a Clipping Mask
Add a new layer above the base and choose Clipping Mask so paint stays inside the shape. Set the layer's blend mode to Multiply, then paint darker tones where the blood is thickest: the center of a pool, the underside of a drop, the bottom of a drip bulb.
Add a second clipped layer for warmer, lighter tones near thin edges. Blood in thin layers lets light through, so a slightly brighter, more orange-leaning red at the margins gives the impression of translucency. Keep transitions soft in thick areas and tighter near the edges.
Step 4: Paint Highlights for the Wet Look
Wetness is mostly highlights. On a new layer, use a small hard brush and paint:
- A sharp, small highlight on the top curve of each drop.
- A thin, elongated highlight along a drip's length.
- A faint secondary reflection on the opposite edge, lower in opacity, to suggest bounce light.
Keep highlights small and deliberate. Overpainting them makes blood look like plastic or candy. Lowering layer opacity or switching the layer to Soft Light or Overlay can help them sit better in the image. For fully glossy results, try Add at low opacity, but watch for blown-out areas.
Step 5: Spatter, Splatter, and Texture
Spatter is where brush sets help most, because every droplet in a real impact is different. You have two approaches:
Painting it manually. Use a round brush with size jitter, flick small dots around the impact, then add a few elongated streaks pointing away from it. Directional streaks imply force and motion.
Using a blood brush set. A free blood brush set is available on Procreate's Folio resource site, and it comes with a 5-step tutorial covering blood shapes, highlights, shadows, texture, and blend modes. If a downloaded .brushset file won't import, one community thread reports that the Share button worked for sending it to Procreate directly.
Whichever approach you choose, keep spatter on its own layer. Then:
- Duplicate it, scale slightly, and lower the opacity for a secondary mist.
- Erase some droplets so the pattern doesn't look stamped.
- Run a small amount of Gaussian Blur on a duplicate layer to fake a soft depth-of-field in the background.
Step 6: Integrate With the Surface
Blood rarely sits on top of an image without interacting with it. To integrate:
- Add a thin contact shadow under droplets on a Multiply layer.
- On skin, tint the blood's edges slightly toward the skin color to suggest it's absorbing and refracting.
- On fabric, soften edges with a textured brush or low-opacity eraser, and let the stain bleed along the weave.
- On paper or cardboard, use a slightly rough brush on the edges to show absorption.
For stylized or cartoon work, you can flatten the shading into two tones with a hard-edge highlight and skip most of the realism steps. The principles above still apply: consistent light direction, varied shapes, and a limited palette.
Painting Dried and Aged Blood
Dried blood is a separate pass, not just a darker color. Shift the palette toward brown, reduce highlight intensity to near zero, and add a textured brush to break up the edges. Cracking lines, flaking edges, and a slightly lighter, dusty rim help. Keep the blood matte, and set highlights to very low opacity or remove them entirely.
Exporting Procreate Blood for Motion Work
If the artwork is going into a video project, export deliberately:
- PSD preserves layers and blend modes for use in After Effects, though some blend modes can behave differently between apps, so check the result.
- PNG keeps transparency for individual elements such as drops, splashes, or smears.
- Hide the background layer before exporting so the blood sits on transparency.
- Export spatter, drips, and pools as separate files so they can be animated independently.
Procreate's Animation Assist can create short frame-by-frame sequences, which suits a quick spatter pop or a flicker of drops. For longer or more controlled movement, the layered assets are typically better animated in a compositing tool.
Animating in After Effects, Premiere Pro, and 3D Tools
Once your blood layers are out of Procreate, common approaches include:
- After Effects: reveal a drip with a mask or Trim Paths-style approach, scale or position-animate droplets, and use displacement or Turbulent Displace for slight wobble. Set the blood layer to Multiply or Linear Burn to sit on footage, then check for dark halos around edges.
- Premiere Pro: drop in transparent PNG elements for simple overlays, with Opacity and Motion for basic movement.
- Cinema 4D or Blender: use the painted maps as textures or decals, with your Procreate shading informing roughness or bump maps.
- Nuke: bring in the PNG, confirm premultiplication, and merge over plates with color correction to match grain and black levels.
Whatever you use, match the blood to the footage: grain, blur, and color temperature will do more for integration than additional detail.
Where Styleframe Fits
Hand-painted blood works well for stills and short elements, but animating it frame by frame is time-consuming. is an AI video tool you could explore as a way to extend your Procreate artwork into motion. Check its current features and export options before building a workflow around it.
As with any generative tool, review the results frame by frame. Check that droplet shapes stay consistent, that edges don't shimmer, and that the color matches your palette before committing to the comp.
A Note on Context and Content Standards
Blood is common in horror, action, medical, and game work, but platforms and clients have different content rules. Check age ratings, ad policies, and delivery specs early. Stylizing the look, such as using a darker, less saturated red or a graphic, illustrative treatment, can make content easier to place while still serving the story.
Quick Checklist
- Deep, slightly desaturated red, not pure red.
- Separate layers for base, shadow, highlights, and spatter.
- Clipped Multiply layer for depth.
- Small, sharp highlights for wetness.
- Varied spatter with directional streaks.
- Contact shadows and surface-specific edge treatment.
- Transparent exports, one element per file, ready to animate.
Follow these steps and you'll have blood that holds up as a standalone illustration or as a reusable asset in a motion pipeline.