How to Draw Block Letters in Procreate
StyleFrame Team8 min read
Block letters in Procreate come from three things: a guide-based sketch, a clean outline drawn on its own layer, and a fill with optional depth on separate layers. Turn on a 2D grid drawing guide, rough out your words in a light color, then trace uniform, squared-off letterforms with a monoline brush on a new layer. Keeping every stage on its own layer is what makes the artwork easy to revise, export, and animate later.
What You Need Before You Start
You need Procreate on an iPad, and an Apple Pencil is recommended. Block lettering relies on consistent stroke width and straight edges, which are harder to control with a finger.
Set up the canvas for reuse rather than for a single print. If the lettering is headed for a video timeline, start with a canvas at or above your delivery resolution. A 3840 × 2160 px canvas works for UHD titles, and larger gives you room to scale in After Effects. Procreate limits layer count based on canvas size, so a bigger canvas means fewer layers. Plan your layer structure accordingly.
Brushes matter less than people assume. You need:
- A light-colored sketching brush (any pencil from the Sketching set works)
- A monoline brush from the Calligraphy set for outlines
- A flat or hard-edged brush for fills, or just ColorDrop
Step 1: Turn On a Drawing Guide
Open Actions (the wrench icon), go to Canvas, and switch on Drawing Guide. Tap Edit Drawing Guide and choose 2D Grid. Adjust grid size so each square is a useful unit for your lettering. For example, one square for letter width, or half a square for stroke thickness.
Enable Drawing Assist if you want strokes to snap to the grid's lines. It helps keep verticals and horizontals consistent, though it also makes curves harder, so toggle it off when you reach rounded letters.
Step 2: Sketch the Layout
Type or write your phrase and decide how it breaks into lines. Block lettering is mostly about composition, so make several quick thumbnails before committing:
- Write the words out and underline the ones that should dominate.
- Try different line breaks. A short word can become a full-width line when you scale it up.
- Sketch a rectangle or other container shape around the words to test whether the stack feels balanced.
Draw each line on its own layer. That lets you move, scale, and center lines independently with the Transform tool. When you're happy with the arrangement, merge the sketch layers by pinching them together, and lower the opacity of the merged layer so it works as a guide.
Step 3: Build the Base Letterforms
You have two reliable routes.
Option A: Draw Letters on the Grid
Use the grid to set a consistent cap height, letter width, and stroke thickness. Draw straight strokes first. For letters like A, E, H, and T, a quick-shape line (draw a line and hold until it snaps) gives a perfect edge. Hold a second finger on the canvas to constrain the angle.
Option B: Type and Trace
Use Add > Add Text and set your phrase in a bold, geometric typeface. Lower the text layer's opacity and trace over it on a new layer. This is a quick way to get consistent proportions and spacing, especially for longer phrases. Tracing a font only gets you a skeleton, though. The finished piece should still have the quirks of your own hand or a deliberate stylistic decision, so modify widths, corners, and counters as you go.
Step 4: Outline on a New Layer
This is the step that causes the most avoidable problems. Add a new layer above your sketch before you draw the outline. If you outline on the sketch layer, the guide becomes part of the final artwork and you can't separate them.
Pick a dark color and your monoline brush. Trace each letter's outer edge, keeping a steady stroke width. A few practical habits:
- Close every shape. Gaps in an outline make ColorDrop leak across the canvas.
- Draw letters individually rather than copy-pasting repeated characters if you want a hand-drawn feel. Duplicate them if you want a uniform, font-like result.
- Zoom in for corners. Squared joins look sharper when you end strokes exactly on the shape's edge.
- Use the Selection tool with a freehand or rectangle mode to erase overlap cleanly instead of scrubbing with the eraser.
Once the outline is complete, hide or delete the sketch layer.
Step 5: Fill and Add Depth
Create a new layer under the outline and fill the letters. ColorDrop is the fastest method: drag a color from the swatch into each enclosed shape and adjust the Threshold slider if the fill doesn't reach the edges. Procreate also has a Reference option in the layer menu, which lets you fill based on the outline layer while painting on the layer underneath.
Extruded Block Effect
Classic block lettering usually has a drop shadow or extruded side. A clean way to build it:
- Duplicate the filled letter layer.
- Move the duplicate down and to the right with the Transform tool, using a small offset.
- Darken it using Adjustments > Hue, Saturation, Brightness.
- Draw connecting lines between the matching corners of the front and back shapes, then fill the sides.
A simpler version is a solid offset shadow: duplicate the fill, shift it, and darken it. Either way, keep the front face, side, and shadow on separate layers.
Highlights and Texture
Use Alpha Lock or a clipping mask on a layer above the fill to add highlights, inline strokes, or textures without spilling outside the letters. A clipping mask is the more flexible option because you can delete or edit the texture without touching the base color.
Step 6: Clean Up for Consistency
Before calling it finished, check the following:
- Spacing: Optical spacing matters more than equal gaps. Round letters can sit slightly closer than straight ones.
- Stroke weight: Compare vertical and horizontal strokes. Horizontals usually need to be a touch thinner to look equal.
- Corner treatment: Pick sharp, rounded, or chamfered corners and use them throughout.
- Alignment: Turn the grid back on and check baselines and cap lines.
- Spelling: Check it before you spend an hour on fills.
Use the Warp or Distort tools in Transform if a line of letters drifts, then re-check straight edges.
Common Mistakes to Avoid
- Drawing outlines on the same layer as the sketch
- Working on a canvas that is too small, then scaling the art up and softening the edges
- Mixing too many stroke widths in a single word
- Leaving open gaps in outlines, which breaks fills
- Flattening everything before you're sure you're done
- Using inconsistent depth direction (shadows pointing different ways)
Preparing Block Lettering for Motion Work
If the lettering is going into a title sequence, lower third, or animated graphic, the export matters as much as the drawing.
- Export as PSD (Actions > Share > PSD) to keep layers. In After Effects, import as Composition – Retain Layer Sizes to get fill, outline, shadow, and highlight as separate layers you can animate individually.
- Export transparent PNGs if you only need the finished artwork. Hide the background layer before exporting.
- Separate letters onto their own layers if you plan per-character animation, such as staggered pop-ins or offsets. This is much easier to do in Procreate than to cut apart later.
- Consider vectorizing if you need infinitely scalable edges or want to use shape-layer tools like Trim Paths. Procreate is raster, so you'd typically retrace in Illustrator or use After Effects' Auto-trace on a clean outline layer, then review the result by hand.
Where Styleframe Fits
Styleframe is an AI video and motion tool built for artists who want direction over the result, not a one-click generator. It takes your Procreate lettering as source material and is driven by reference images, video clips, and keyframes. That makes it useful when you want to extend hand-drawn block lettering into motion without redrawing every frame.
A few practical uses:
- Frames-to-Video: Draw a start frame and an end frame of your lettering (for instance, an empty canvas and the finished word, or two different poses of an extrusion), set them as keyframes, and generate the motion between them.
- Restyle and Ink-and-Paint: These are reference-driven style transfer tools. Use your Procreate lettering as the style reference to carry its linework and color onto footage or other frames, so the look stays consistent.
- 2D-to-3D and Turntable: Turn flat block lettering into a 3D form and generate a turntable view. This is useful for previs or look development before committing to a full Cinema 4D or Blender build.
- Remove Background and 4K Upscale: Isolate lettering from a paper or textured background, and bring output up to production-ready 4K.
Iteration is non-destructive, so you can try variations without overwriting earlier versions. Styleframe exports image sequences, which drop straight into After Effects or Nuke, and an After Effects plugin is on the way. Your compositing stays where it is. Styleframe adds a generation step before it, not a replacement for it.
Quick Workflow Recap
- Create a large canvas and turn on a 2D grid guide.
- Sketch phrase layouts, one line per layer.
- Build base letters on the grid or by tracing text.
- Outline on a new layer with a monoline brush.
- Fill with ColorDrop on a separate layer.
- Add extrusion, shadow, and highlights on their own layers.
- Check spacing, stroke weight, and spelling.
- Export as PSD or transparent PNG for After Effects, or use the art as source material in Styleframe.
Once the grid, outline, and layer habits are in place, block lettering gets quick. The clean, separated layers give you more to work with in After Effects, Nuke, or Styleframe.