How to Draw Behind a Picture Procreate
StyleFrame Team7 min read
Procreate draws behind a picture by layer order: put the picture on its own layer, add a new layer beneath it, and draw there. If the picture is flat (a photo or an image with its background baked in), first select the subject with the Selection tool, copy and paste it to a new layer, then add an empty layer between the copy and the original and draw on that. The layer stack, not the brush, decides what sits in front.
How "behind" works in Procreate
Procreate stacks layers from bottom to top. Anything on a lower layer renders behind everything above it, so drawing behind a picture means creating a layer lower in the stack than the picture. Layers can be dragged up and down, so you can reorder at any time without redrawing.
Two things trip people up:
- The picture is not isolated. If your picture and its background are one layer, there is nothing to draw behind. You have to separate the subject first.
- The top layer is not fully opaque. Transparent areas, soft edges, or reduced layer opacity let the layer underneath show through. This is a common reason lines appear to "go through" an object.
If you come from After Effects, think of it as a layer stack with track mattes and alpha channels. The logic is the same, just with finger-sized controls.
Method 1: The picture already sits on its own layer
This is the simplest case, such as a PNG with transparency or a sticker-style cutout.
- Open the Layers panel (the square icon, top right).
- Tap + to add a new layer.
- Press and hold the new layer, then drag it below the picture layer.
- Tap the new layer to make it active and draw.
Anything you draw now appears behind the picture, and it only shows through where the picture is transparent. If you get unwanted bleed-through, check the picture layer's opacity slider and make sure it is at 100%.
Method 2: Select and copy the subject from a flat image
When the picture is a single flattened layer, you have to cut the subject out so there is something to sit in front of your drawing.
- Choose the Selection tool.
- Zoom in and trace around the edge of the subject. Precision matters here, because any gap becomes visible once you draw behind it.
- Close the selection, then tap Copy & Paste from the toolbar (or use the three-finger swipe-down menu). The subject now exists as its own layer.
- Add a new layer and place it between the pasted subject and the original flat image.
- Rename the layer something obvious, like "behind," so you do not lose track of it.
- Pick a brush and draw.
Your drawing now appears behind the cutout, over the original image underneath. Where your selection was rough, you will see small inconsistencies where strokes creep over the edge. Sometimes that reads as accidental depth, but if you want a clean result, redo the selection with more zoom.
A further trick: paste the subject several times. Make one copy black, blur it, and drop its opacity to get a simple shadow layer beneath the subject without any extra drawing.
Alternative: trace, fill, and cut
A more manual route is to trace the subject on a new layer, fill the shape, select it, and copy the original image content back through that selection. It takes longer than a direct selection, but it can produce a more accurate edge on complicated silhouettes, since you control the outline as a drawn shape before it becomes a selection.
Method 3: Color behind existing linework
If your "picture" is your own line art and you want color or a background behind it without filling in the open outlines, use Reference and ColorDrop.
- Tap the linework layer, then tap it again and choose Reference.
- Create a new layer below the linework.
- With the new layer active, drag a color from the color wheel onto the canvas (ColorDrop). Because the linework layer is the reference, the fill respects its shapes.
- Hold your finger down after dropping to reveal the threshold bar, and slide left or right to control how far the fill spreads. This helps when lines have tiny gaps.
- Turn Reference off on the linework layer when you are finished.
For more control, add another layer between the background and the linework, then use the background layer's Select option to restrict painting to a shape. Painting on a separate middle layer means you can erase mistakes without touching the lines or the background. If overlapping sketches are hard to color, give each small element its own layer.
When you are painting solid fills, switch to a brush that goes fully opaque. Not all brushes reach 100% coverage, so the layer below can keep showing through. A monoline-style brush from the Calligraphy set is a dependable choice for solid color.
Method 4: Knock out the layer below
Sometimes the problem is not drawing order but visibility. Your drawing is below the picture, but the picture is semi-transparent, so you see strokes through it. There are three clean fixes:
- Delete the overlap. Tap and hold with two fingers on the top layer to select its content. Switch to the lower layer and delete. The area under the top layer is now empty, so nothing shows through.
- Use a mask. Masks are another option for hiding the area on the lower layer instead of deleting it. Anyone used to After Effects masks and mattes will find the idea familiar.
- Add a white (or solid) layer between the two. Fill a layer with a solid color and put it between the picture and the layer below. It blocks everything underneath the picture, which is useful when the picture has partial transparency.
Masks are the better choice if you expect revisions. Deletion is faster but permanent unless you undo.
Common problems and quick fixes
Strokes appear on top of part of the subject. Your selection missed that edge. Zoom in further, reselect, and replace the cutout layer.
A halo or fringe shows around the cutout. The selection likely included background pixels. Shrink the selection slightly, or erase the fringe on the cutout layer with a hard-edged eraser.
The drawing disappears entirely. Check that the "behind" layer is above the original flat image and below the cutout. If it falls beneath the flat image, the flat image covers it completely.
Color seeps through line gaps. Increase ColorDrop threshold, or close the gap on the linework layer first.
Brush strokes look thin or ghosted. Switch brushes or raise the brush's opacity. Not all brushes build to full coverage.
Getting layered Procreate artwork into a motion pipeline
If the reason you are drawing behind a picture is to build a layered illustration for animation, planning the layers before you start saves work later. Name layers clearly, keep foreground and background elements on separate layers, and avoid flattening until you export. Keeping the layer order you built for drawing behind makes the artwork easier to reuse in a later composite.
This is also where AI tooling can sit alongside Procreate. is an AI video and motion tool that can work alongside Procreate artwork.
None of that replaces learning the Procreate fundamentals above. A clean cutout and a well-ordered layer stack make every later step easier, whether you animate by hand, in After Effects, or with generative tools.
Quick reference
Final tips
Zoom in before you select, because edge quality decides whether the result looks believable. Name your layers as you go. Keep an untouched copy of the original image in case you need to redo the cutout. And when in doubt, choose masks over deletion, since being able to undo a decision next week is worth the extra tap.