How to Draw Backgrounds Behind Picture Procreate
StyleFrame Team7 min read
To draw a background behind a picture in Procreate, add a new layer, drag it below the layer that holds your picture or line art, and paint on it. Procreate stacks layers from bottom to top, so anything lower in the Layers panel sits behind everything above it. If your line art has gaps or transparent areas, set the art layer as Reference and use ColorDrop on the layer beneath it so the fill stops at your lines instead of flooding the whole canvas.
How Layer Order Works in Procreate
Everything in Procreate depends on stacking order. Open the Layers panel (the two-squares icon in the top right) and you'll see a vertical list. Layers at the top are in front, and layers at the bottom are behind.
That means "drawing behind" a picture is mostly a layer-management task, not a drawing technique. Your picture, whether it's a photo, a character, or inked line art, stays on its own layer. The background lives on a separate layer below it. Because the two never share pixels, you can repaint, recolor, or replace the background without touching the subject.
If you've worked in After Effects, this is the same mental model as a composition's layer stack, minus the timeline. Treat each Procreate layer as a footage layer and the workflow will feel familiar.
Method 1: Add a New Layer Beneath Your Picture
This is the simplest case, and it works when your subject has transparent areas around it (a cutout character, a PNG with alpha, or art on a transparent canvas).
- Open the Layers panel and tap + to create a new layer.
- Press and hold the new layer until it lifts out of the list, then drag it below your picture layer.
- Tap the new layer to select it so it's active.
- Paint, fill, or import your background art on this layer.
Anything transparent on the upper layer will reveal the background beneath it. If you can't see your background, check two things: that the layer's visibility box is ticked, and that your picture layer isn't fully opaque across the canvas. A photo that fills the whole frame will hide everything behind it, which leads to the next scenario.
Tip: Hide the background layer's visibility while you work on the subject, and hide the subject when you work on the background. This keeps you from painting around things that don't need to be avoided.
Method 2: Fill Behind Line Art with Reference and ColorDrop
The problem many illustrators hit is that the picture is line art, where some shapes are closed and some are only outlines. If you fill a layer underneath, the color bleeds through every open area and floods the drawing. The fix is to use Reference.
- Select your line art layer, tap it again to open its menu, and choose Reference.
- Create a new layer and drag it below the line art layer.
- Drag a color from the top-right color swatch and drop it onto the canvas area you want to fill (this is ColorDrop). Because the line art is the reference, the fill respects its edges.
- Hold your finger down after dropping to reveal the threshold bar. Slide left or right to adjust how tightly the fill hugs the lines.
If the fill leaks through small gaps, increase the threshold carefully or close the gap on the line art layer with a quick brush stroke. ColorDrop works best on well-defined, closed shapes.
Add a Separate Color Layer Between Line Art and Background
For illustrations with many small elements, a three-layer structure keeps you flexible:
- Top: line art (Reference turned off after you've set up your fill)
- Middle: color layer for the individual elements
- Bottom: the overall background
Select the shape you want via the background layer's Select option, then switch to the middle layer and scribble in your colors. The selection keeps you inside the boundary, and because everything is on its own layer, mistakes are easy to erase. For heavily overlapping elements, give each one its own layer. If colors look translucent, switch to a brush that lays down opaque color, since not every brush builds to full opacity.
Method 3: Replace the Background Behind a Photo
When the picture is a photo, the background is baked into the image. Procreate has no dedicated one-tap background remover, so you isolate the subject first and then place a new background behind it.
- Import the photo (Actions → Add → Insert a photo).
- Open Selection and choose Freehand for a manual trace, or Automatic to tap and drag across areas of similar color.
- Select the part you want to remove, or select the subject and tap Invert.
- Delete the unwanted area, for example by scrubbing three fingers left and right on the canvas to delete the selected area.
- Create a new layer, move it below the photo layer, and paint or place your new background.
Automatic selection works best on clean, high-contrast edges. Hair, motion blur, and semi-transparent edges usually need manual cleanup with the eraser at a soft, small size. Zoom in and check edges against both a light and dark background, because halos only show up once the new background is in place.
If you plan to refine the cutout later, duplicate the photo layer before you delete anything. Keeping the original hidden below lets you recover pixels without re-importing.
Keep Paint Inside the Lines: Alpha Lock and Clipping Masks
Two features keep background and subject work tidy:
- Alpha Lock restricts painting to pixels that already exist on a layer. It's useful for recoloring a shape without spilling outside it.
- Clipping Mask attaches a layer to the one beneath it so that content only appears where the base layer has pixels. Use it for shading, texture, or color variations that must stay within a shape.
For backgrounds, a clipping mask is handy when you want a gradient or texture to appear only inside a defined area, such as a window, a speech bubble, or a letterform. Put the texture layer directly above the shape layer, tap it, and choose Clipping Mask.
Common Problems and Fixes
- The fill covers my drawing. The fill layer is above the art layer. Drag it below.
- Color leaks everywhere. You haven't set the line art as Reference, or the outline has gaps. Close the gaps or adjust the fill threshold.
- A white halo surrounds my cutout. Edge pixels from the old background remain. Shrink the selection slightly before deleting or erase the fringe manually.
- I can't paint on the background. Another layer is selected, or the layer is locked. Tap the right layer and check for the lock.
- The background looks flat. Add depth with a soft gradient, a texture layer set to Multiply or Overlay, and a subtle blur on distant elements.
Moving Procreate Backgrounds into a Motion Pipeline
For motion designers, the real value of separate layers shows up after you leave Procreate. Export as a layered PSD and your subject, background, and effects arrive in After Effects as individual layers. From there you can parallax the background, animate the subject, add camera moves, or relight the scene.
A few habits make this smoother:
- Paint the background larger than the final frame so camera moves and parallax don't reveal edges.
- Keep distinct depth planes (foreground, midground, background) on separate layers.
- Work at a canvas size that covers your delivery resolution, since upscaling later softens painted detail.
- Name your layers before export. Procreate's default names make large comps hard to manage.
Quick Reference
- Put the background on its own layer.
- Drag that layer below the picture in the Layers panel.
- For line art, set the art layer as Reference and use ColorDrop on the layer beneath.
- For photos, select and remove the old background, then paint a new one below.
- Use Alpha Lock and Clipping Masks to keep color contained.
- Export a layered PSD (or PNGs per layer) to carry your work into After Effects or another compositing tool.
Once layer order is second nature, backgrounds stop being a fill-and-fix chore. They become a flexible, replaceable part of the image that you can rework at any stage.