How to Draw and Shade with Procreate
StyleFrame Team8 min read
To draw and shade in Procreate, start with flat base shapes on their own layers, pick a single light source, then add shadow layers above each shape as clipping masks (or with Alpha Lock). Block in hard-edged shadows first, soften them with an airbrush or blending brush, and finish with a midtone, reflected light, and highlights. Keeping every value on its own layer means you can adjust the shading later without repainting, and the layers can be brought into After Effects when the artwork needs to move.
Before You Draw: Decide on Light and Values
Shading is a lighting decision before it is a brush decision. Before you touch a shadow layer, settle three things:
- Light direction. Mark it on the canvas with a small arrow on a throwaway layer. Every shadow you paint should answer to that arrow.
- Light quality. Hard, direct light produces crisp shadow edges and strong contrast. Overcast or diffused light produces gradual falloff and lower contrast.
- Value count. For most illustrations and motion boards, four tones are enough: base, core shadow, midtone transition, and highlight. You can add more later, but starting with fewer keeps the form readable.
If you work in motion, add a fourth consideration: where the light will move. A fixed light on a character that rotates, or a moving light on a static prop, changes how much shadow detail is worth painting.
Step 1: Draw Clean Base Shapes
Create a canvas at the resolution you will actually deliver. If the art is headed for a 4K timeline, work large enough that you won't be upscaling a soft painting later.
- Sketch loosely on a dedicated layer, then lower its opacity.
- Draw shapes with a monoline or inking brush. For geometry such as spheres, draw an ellipse and hold the stroke at the end to trigger QuickShape, then use the Transform tool to refine it.
- Fill each shape by dragging the color from the top-right swatch onto the closed outline. Use a fill threshold that avoids leaving a fringe at the edge.
- Put each major object (head, arm, prop, background element) on its own layer.
Flat, separated shapes are what make the later steps fast. They also make rigging or layer-based animation easier if you move the piece into After Effects.
Step 2: Set Up Shading Layers
You have two reliable ways to keep shading inside a shape.
Clipping masks
Add a new layer above the base shape, tap it, and choose Clipping Mask. Anything painted on this layer shows only where the base layer has pixels. Use one clipping layer per value (shadow, midtone, highlight) so you can change opacity, blend mode, or color independently.
Alpha Lock
Tap the base layer and choose Alpha Lock. Painting now affects only existing pixels on that layer. It is faster for quick studies, but it is destructive: your shading is merged with your base color. For anything you might revise, clipping masks are the safer choice.
Step 3: Block in Hard Shadows First
Pick a color for the shadow. Rather than simply choosing black or a darker gray, shift the hue slightly toward blue or purple and reduce the brightness. Shadows that carry a cooler, more saturated color usually look richer than a plain darkened version of the base.
On a clipping layer:
- Use a hard-edged brush with some pressure response.
- Paint the shadow shape on the side opposite your light, following the form. On a sphere, that is a crescent. On a cylinder, it is a band that wraps around the surface.
- Add cast shadows where an object blocks light from a neighbor, such as a chin onto a neck.
The Selection tool is a strong option here. Use the freehand selection mode to draw the exact shadow region with a crisp edge, fill it, then soften only where needed. This gives you a graphic shape you can reason about, and it works well for stylized or cel-style looks where you want clean shadow edges.
Step 4: Soften and Blend
Hard shadows are the skeleton. Softening decides the material and the mood.
- Airbrush. Use a soft airbrush at low opacity inside a selection or clipping layer. It builds gradients gradually, which is useful for curved surfaces.
- Pressure-sensitive brushes. A brush that gives a hard edge under firm pressure and a soft one under light pressure lets you vary edges within one stroke, with no need to swap tools.
- Smudge tool. Set it to a soft brush with moderate strength and drag along the form, not across it.
- Gaussian Blur. From the Adjustments menu, apply it to a whole shading layer, using a small amount. Too much blur removes the shape you just designed.
A useful rule from observation: shadow edges are sharpest where the shadow-casting object is closest to the surface, and they soften as the distance grows. A shadow directly under a chin is crisp at the contact point and diffuses outward.
Step 5: Add Midtones, Reflected Light, and Highlights
With the main shadow soft enough, build the rest of the value structure.
Midtones
Add a clipping layer between the base and the shadow. Paint a transitional color along the shadow edge, so the shift from light to dark has a step rather than a jump. This is what gives rounded forms their volume.
Reflected light
Light bounces. A thin band of lighter, slightly warmer or cooler color along the shadow-side edge, picked up from nearby surfaces, stops the shadow from feeling flat. Keep it dimmer than the lit side, or the form will look as if it has two light sources.
Highlights
Add one more clipping layer on top. Use a lighter tint of the base (not pure white) for matte surfaces, and brighter, smaller, sharper highlights for glossy ones. Place highlights where the surface faces the light most directly, and follow the curvature.
Step 6: Use Blend Modes for Color and Atmosphere
Instead of painting every tone with local color, you can create shading layers using blend modes:
- Multiply for shadows. Paint with a mid-saturated purple or blue and let the mode darken the base while preserving its hue.
- Overlay or Soft Light for gentle color shifts and contrast.
- Add (Linear Dodge) for glow, rim light, and emissive highlights.
- Color for tinting a region without changing value.
Because these sit on separate layers, you can change the whole mood by changing a few layer colors or opacities. Rim lights are a good use case: a thin Add-mode layer on the edge facing a colored background light often sells integration with a scene better than any amount of local blending.
Common Shading Mistakes
- Pure black shadows. They flatten color and make the art look dirty. Use a tinted dark.
- Multiple conflicting light sources. Unless you intentionally have key and fill lights, keep one direction.
- Shading that ignores form. Strokes that run straight across a curved object read as stripes. Follow the contour.
- Overblending. If every edge is soft, nothing looks solid. Keep some crisp edges to define planes and contact points.
- Merging layers too early. Keep separate layers until the piece is approved.
Taking Procreate Shading into a Motion Pipeline
Procreate is a good place to design the look of a frame. For professional motion work, the question is what happens next.
Export with layers intact. Export as a layered PSD so the layers can be brought into After Effects. Check that blend modes map correctly, since some Procreate modes may not translate identically, and verify the result against your reference. Alternatively, export key layers as PNGs with transparency.
Name and group layers. Rename the layers before export (such as arm_base, arm_shadow, arm_rim). In After Effects, those names will determine how easy the file is to rig, parent, or animate.
Keep a clean plate. If a background will move or be replaced, export it separately from character art and include any shadow layers that need to be composited on top with Multiply.
Use the painting as a style target. A shaded Procreate frame can serve as a reference for how a whole sequence should look: line weight, shadow shape, edge softness, color temperature. This is where can fit in a production, as a tool that works from references you provide, so the shading decisions you made stay yours.
It is not a replacement for painting the key frame. Hand-shaded frames give you the intent; a tool like this can help carry that intent across more frames when hand-painting every one would be impractical.
A Quick Practice Routine
To build the skill without overcomplicating it:
- Draw a sphere, a cube, and a cylinder on separate layers.
- Place the light at upper left. Shade each with clipping layers: shadow, midtone, highlight.
- Repeat with the light moved to the back right, producing rim lighting.
- Repeat with hard light, then soft light, and compare edge quality.
- Group the three objects into a simple still life, add cast shadows with Multiply, and export as a layered PSD to test the round trip into After Effects.
After this exercise, shading complex subjects such as faces, fabric, or hard-surface props becomes a question of breaking them down into those same basic forms.
FAQ
Should I use Alpha Lock or clipping masks? Use clipping masks when you expect revisions, and Alpha Lock for quick sketches and studies.
What brush is best for shading? A soft airbrush for gradients, a hard round brush with pressure response for crisp shadow shapes, and a blending or smudge brush for refining edges. Brush choice matters less than light direction and value structure.
How many layers should I use? As many as you need to keep adjustments non-destructive. For a single object, a few shading layers is often enough.
Can I animate Procreate artwork? Yes. Layered exports can be rigged or animated in After Effects. For longer or more complex sequences, a compositing pipeline gives you more control.