How to Draw an Eyeball on Procreate
StyleFrame Team8 min read
To draw an eyeball in Procreate, start with a new canvas (around 3000 x 2000 px), sketch a sphere with the iris and pupil as circles inside it, then paint the sclera in a soft gray rather than pure white. Add shadow from the upper lid, build iris texture with strokes radiating from the pupil, and finish with a crisp highlight on its own layer. Keeping each part (sclera, iris, pupil, lids, highlight) on a separate layer lets you adjust values without repainting, and it makes the drawing easy to export as a layered PSD for animation.
Set Up the Canvas and Reference
Create a new canvas at a size that gives you room to zoom in. 2000 x 2000 px works for a quick study, while 3000 x 2000 px or larger is better if you plan to scale the art in a video comp. If the eye will end up in a 4K timeline, work larger than you think you need. Upscaling a soft digital painting later is harder than starting with resolution.
Pick a reference photo before you draw. Import it into Procreate through Canvas > Reference, or drop it onto its own layer and lower its opacity. A reference matters more for eyes than for most subjects because viewers notice small errors in them immediately. Look at where the highlight sits, how much of the iris the upper lid covers, and how dark the shadow under the lid is.
Squint at the reference to flatten the detail into big value shapes. The darkest areas are usually the pupil, the upper lid shadow, and the outer edge of the iris. The lightest are the highlight and parts of the sclera.
Build the Structure on Separate Layers
Set up your layers before you start rendering. A workable stack from bottom to top:
- Skin or background color
- Sclera (the white of the eyeball)
- Iris base color
- Iris detail
- Pupil
- Shadow from the upper lid
- Upper and lower lids
- Lashes
- Highlights
Naming layers takes a few seconds and saves time later, especially if you hand the file to someone else or import it into After Effects.
Sketch the Basic Shapes
On a new sketch layer, use a pencil-style brush (a chalk or HB-type pencil works well) at low opacity. Draw these in order:
- A rough almond shape for the visible eye opening
- A full circle for the iris, larger than you think. In most eyes the upper lid covers the top of the iris, so the circle gets cropped by the lid.
- A smaller circle for the pupil, centered inside the iris
- A curved line above the opening for the lid crease, and a thin band for the thickness of the lower lid
Drawing the full circle and letting the lid cover part of it is the main trick for making the eyeball look like a sphere sitting under skin, rather than a flat sticker on a face. Use QuickShape (draw a circle and hold) if you want a clean geometric iris.
Drop the sketch opacity once the shapes feel right, then ink or define the contours on a new layer with a darker, more confident stroke.
Paint the Sclera, Iris, and Pupil
The Sclera Is Not White
Fill the sclera layer with a light warm or cool gray, not pure white. Pure white will compete with your highlight and flatten the form. Then add shading:
- Darken the corners near the tear duct and outer corner
- Add a soft shadow under the upper lid, since the lid blocks light and casts onto the eyeball
- Keep the center of the eyeball slightly lighter to suggest the curve of the sphere
A soft airbrush or a low-opacity blending brush works here. If you want faint veins, use a thin, low-opacity brush in a muted red and keep them minimal. Overdone veins look like a bloodshot effect, which may not be what you want.
Block in the Iris
Choose a base color for the iris and fill the circle on its own layer. Then add depth in passes:
- Darker outer ring. Paint a darker band around the edge of the iris (the limbal ring). It gives the eye definition and helps it read as a sphere.
- Radiating strokes. With a thin brush, draw light strokes outward from the pupil toward the edge. Mix lighter and darker variations of your base color.
- Light from below. The lower part of the iris often catches more light, since light passes through the iris from the opposite side of the eye. A gentle lighter gradient along the bottom adds realism.
Use Alpha Lock or a clipping mask on the iris layer so your texture strokes stay inside the circle. Clipping masks are the better option because you can keep adding texture layers without touching the base shape.
Place the Pupil
Fill the pupil with a near-black rather than pure black if you want some tonal room, then keep it centered unless you want the eye to look off-axis. A small adjustment in pupil size changes the mood noticeably. Larger pupils read as softer or more startled, and smaller ones read as sharper or more intense.
Add the Lids, Lashes, and Shadow
Eyelids give the eyeball its context. Without them, you have a ball. With them, you have an eye.
- Upper lid. Paint a shadow band across the top of the iris and sclera, soft at the bottom edge and darker near the lash line. A Multiply layer clipped to the eye layers keeps this non-destructive.
- Lower lid. Draw two close lines to suggest thickness, with a thin lighter strip of the waterline catching light.
- Lashes. Draw them in tapered strokes that follow the lid's curve. Lashes grow in clumps with varied lengths and directions, so avoid making them evenly spaced. Procreate has lash brushes and stamps, but hand-drawn strokes usually look less repetitive.
Keep lashes on their own layer. If you later want to animate a blink, you will need them separate from the eye itself.
Finish With Highlights and Reflections
Highlights are what make an eyeball look wet. Create a new layer at the top and use a small hard brush in white (or a very light tint of the ambient light color).
- Place the main specular highlight where the light source sits relative to the viewer. It usually overlaps the iris and pupil edge.
- Add a smaller, softer secondary reflection on the opposite side if your reference shows one.
- Add a thin bright line along the lower lid's waterline to suggest moisture.
Resist the urge to add many highlights. One or two clear ones usually look better than a cluster.
Finally, add a subtle color layer set to Color Dodge at low opacity to suggest ambient light, such as a warm bounce along the lower iris. Check your work by flipping the canvas horizontally (Canvas > Flip) to catch asymmetries or drawing errors you've stopped seeing.
Prepare the Eye for Animation
If your eyeball is headed for a motion project, a few export choices save time:
- Export as PSD so layers carry into After Effects. Check that your blend modes and clipping masks survived the trip.
- Keep elements separate. Iris, pupil, highlight, upper lid, lower lid, and lashes on separate layers let you move the iris for eye direction, scale the pupil, or animate a blink with lid layers.
- Extend the hidden areas. Paint the full iris circle and full sclera, even where the lids cover them. When you animate the lids, nothing will be missing underneath.
- Hold highlights on their own layer. In a moving eye, the highlight often stays put while the iris shifts, which is part of what sells the glossy surface.
For simple motion you can work frame by frame, and for more complex motion many artists bring layers into After Effects and rig them there.
Where Styleframe Fits After the Drawing
Once you have a finished eyeball, you may want to take it further than a rigged layer stack: stylize it, push it into a different look, or turn a few poses into a moving shot. Styleframe is an AI video and motion tool built for that kind of controlled, reference-driven work, rather than one-click generation.
A few practical ways it can sit beside your Procreate file:
- Frames-to-Video. Export two or three keyframes, such as eye open, eye half-closed, and eye looking sideways, and use them as keyframes to generate the motion between them. You decide the poses, and the tool fills the transitions.
- Restyle and Ink-and-Paint. Use a reference image or clip to transfer a look onto your drawing, for example turning a clean digital eye into an ink-and-paint or painterly style, while keeping your composition.
- 2D-to-3D and Turntable. If the eye is part of a character or object, these can help you explore the form from other angles for reference or previs.
- Remove Background and 4K Upscale. These are useful for isolating the eyeball cleanly and delivering production-ready 4K output.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier versions. It exports image sequences, so the results drop into an After Effects or Nuke comp like any other footage. Your compositing workflow stays the same. Styleframe adds another source of controlled material to it.
Quick Checklist
- Large canvas with a reference photo
- Separate layers for sclera, iris, pupil, lids, lashes, and highlights
- Gray sclera with shading from the lids
- Dark limbal ring and radiating iris strokes
- Upper lid shadow on a clipped Multiply layer
- One or two deliberate highlights
- Full circles and extended hidden areas if you plan to animate
Drawing an eyeball well comes down to treating it as a glossy sphere under shadow rather than a flat symbol. Get the values, layers, and highlights right, and the rest is polish.