How to Draw a Photo on Procreate
StyleFrame Team8 min read
To draw a photo in Procreate, insert it with Actions (wrench) > Add > Insert a Photo, lower its opacity, add a new layer above it, and trace or sketch with a brush of your choice. For a quick line-art base, duplicate the photo, desaturate it, duplicate again, invert the top copy with Curves, set it to Color Dodge, and add Gaussian Blur until the lines appear. Either way, hide or delete the photo layer when you finish, and export the drawing as a PSD or PNG for your motion pipeline.
This guide covers both approaches, the settings that save time, and how to carry the result into After Effects, Nuke, or an AI-assisted style pass.
Method 1: Trace Over a Photo on a New Layer
This is the most direct way to draw a photo in Procreate. It works well for animatics, rotoscope-style reference, storyboard frames, and character or prop design.
Step 1: Set up the canvas
Create a canvas that matches your delivery format. If the drawing is going into a 1920×1080 or 3840×2160 comp, build the canvas at that aspect ratio so you don't crop or resample later. Procreate limits your layer count based on canvas size and device memory, so a very large canvas gives you fewer layers.
Step 2: Insert the photo
Tap the wrench (Actions), choose Add, and select Insert a Photo. Procreate drops the image in the center of the canvas in a transform state. Use Fit to Canvas if you want it to fill the frame, or drag the corners to scale it. Turn off snapping and use Freeform if you need to position it without it jumping to guides. Tap the transform tool again to commit.
If you don't want the photo to appear in your exported timelapse, use Insert a Private Photo instead. This matters if you share process videos or have to keep a client's reference out of them.
Step 3: Lower the opacity and lock it
Open the Layers panel, tap the "N" on the photo layer or swipe with two fingers to reach Opacity, and bring it down to roughly 30–50%. That makes your own strokes readable against it. Many artists also lock the layer so they don't accidentally draw on or move it.
Step 4: Draw on a new layer
Add a new layer above the photo. Pick a brush. Inking brushes such as Studio Pen or Technical Pen work well for clean outlines. Dry-ink or pencil-style brushes suit looser sketches. Trace in large, confident strokes first and simplify as you go. A photo shows far more detail than a stylized drawing needs, so decide what to leave out.
Some practical habits:
- Hold at the end of a stroke to snap it into a straight line or a clean shape.
- Use separate layers for outlines, fills, and highlights. You'll want that separation if the artwork is going into a compositing package.
- Sample colors from the photo by touching and holding on the canvas to open the eyedropper.
- Reduce the photo further or hide it periodically to check that your drawing reads on its own.
Step 5: Color and refine
Add a layer below your linework for flat colors, then use Alpha Lock to recolor strokes without touching the edges. If you're using the photo only for proportions, finish with your own palette and shapes so the result isn't a copy of the source.
Method 2: Convert a Photo to a Line Drawing
If you want an automatic outline you can paint over, Procreate has no one-tap "photo to line art" button, but you can build the effect with adjustments and a blend mode. This is the classic "color dodge" sketch technique.
- Insert the photo (Actions > Add > Insert a Photo).
- Duplicate the layer (swipe left on it and tap Duplicate).
- Desaturate the duplicate. Open Adjustments > Hue, Saturation, Brightness and drop Saturation to zero, applying it to the layer.
- Duplicate the desaturated layer.
- Invert the top copy. Open Adjustments > Curves and drag the curve so it runs downhill instead of uphill.
- Set the blend mode to Color Dodge. Tap the "N" on the layer thumbnail, open the Lighten tab, and choose Color Dodge. The canvas will turn almost white.
- Apply Gaussian Blur to the inverted layer (Adjustments > Gaussian Blur, Layer mode) and slide your finger until pencil-like lines emerge.
Troubleshooting the technique
- You see a high-contrast black-and-white photo, not lines. The blur hasn't been applied to the inverted layer, or the blend mode is on the wrong layer. Check that the inverted copy is the one set to Color Dodge and the one you blurred.
- The result has a yellow or colored cast. One of the layers wasn't fully desaturated. Redo the Saturation step.
- You can't find the blend modes. They live behind the small letter on the layer thumbnail, not in the Adjustments menu.
- The lines are too faint or too heavy. Change the blur radius. A lower blur gives finer, tighter lines, while a higher one gives bolder, softer ones.
Treat the output as a reference or underdrawing. Create a new layer on top and ink over it by hand to get cleaner, more intentional lines.
Method 3: Keep the Photo in a Reference Window
If you'd rather draw freehand than trace, use Procreate's Reference feature. Open the wrench, tap Canvas, and switch on Reference. Choose Image to pull in a photo from your library. A floating window appears beside your drawing that you can move, zoom, and resize.
This is useful for drawing from life-style references, checking proportions, or sampling a palette without cluttering the canvas. The reference window counts against your layer budget, so keep that in mind on large documents.
Choosing Reference Photos Responsibly
Tracing a photo is a legitimate way to get proportions and perspective right, but copying someone else's photograph and presenting it as your own work is a different thing. Use your own photography, licensed stock, or sources whose license covers your use, including commercial work. Then change the stylization, color, and composition so the piece is your own. For client work, confirm usage rights before the drawing goes into a deliverable.
Exporting Procreate Artwork for a Motion Pipeline
A drawing built on a photo is often just the first step for motion artists. Here's how to hand it off cleanly.
- Hide the photo layer before exporting if you only want the drawing. Or keep it in a separate group so it's easy to toggle.
- Export as PSD to keep layers. Layered files let you animate linework, fills, and highlights independently in a compositing package.
- Export as PNG for a flat image with transparency, useful for a single overlay or texture.
- Name and group your layers in Procreate. It saves time later when a comp has dozens of them.
- Work at your final resolution. Upscaling hand-drawn lines in a comp softens them.
If you plan to animate frame by frame, Procreate's Animation Assist can block out a short sequence on the iPad. Many artists then export the frames and finish timing and compositing in After Effects or Nuke.
Where Styleframe Fits After the Drawing
Procreate is where you make the drawing. If you want that drawing to turn into motion or a different look, picks up from there. It's an AI video and motion tool built for artists who want control, not a one-click black box. Every generation is driven by your own inputs: reference images, video clips, and keyframes.
A few practical ways it connects to a Procreate workflow:
- Frames-to-Video: Use keyframes you've drawn, such as a start pose and an end pose traced from photos, and generate the motion between them under your direction.
- Restyle and Ink-and-Paint: These use a reference image to drive style transfer. A Procreate drawing can serve as the style reference, so the look of your linework carries into other footage or frames.
- 2D-to-3D and Turntable: Turn a flat character or prop drawing into a 3D-style view, then rotate it for design review or lookdev.
- Remove Background: Clean out a backdrop.
The goal is to leave your pipeline as it is and add a controllable generation step, not to replace the drawing or the comp.
As with any AI-assisted step, check results frame by frame. Treat the output as material to composite and refine, and confirm that your reference images are ones you have the right to use.
Quick Reference Checklist
- Match the canvas to your final delivery aspect ratio and resolution.
- Insert the photo with Actions > Add > Insert a Photo, or use Insert a Private Photo to keep it out of the timelapse.
- Lower opacity, lock the photo layer, and draw on a new layer above.
- For auto line art: desaturate, duplicate, invert, Color Dodge, Gaussian Blur.
- Use the Reference window for freehand drawing without placing the photo on the canvas.
- Use references you're licensed to use, and make the final piece your own.
- Export PSD for layered handoff or PNG for flat transparency.
- Take the drawing into After Effects or Nuke, or use it as a keyframe or style reference in Styleframe when you need motion or a restyled look.
Once the workflow is in your hands, drawing from a photo in Procreate takes minutes. The more important decisions are what to simplify, what to change, and how the drawing will move once it leaves the iPad.