How to Draw a Night Sky on Procreate
StyleFrame Team8 min read
To draw a night sky in Procreate, build a dark blue gradient on its own layer, add lighter color near the horizon, paint soft glows with Add or Overlay blending, then scatter stars on a separate layer with a small hard brush and a splatter brush. Keep the sky, stars, moon, and foreground on separate layers so you can export a layered PSD and animate each element later. That layered structure matters most if the artwork is headed for After Effects.
Set Up the Canvas for a Night Sky
Start with a canvas sized for where the art will end up. Hobbyist tutorials often use a square canvas around 2500 × 2500 px or an A4 canvas at 300 DPI. For motion work, create a custom canvas at your comp resolution or larger. A 16:9 canvas at 3840 × 2160 gives you a 4K frame. If you plan to push in, pan, or add parallax, go taller or wider so you have room to move.
Keep these settings in mind:
- Color profile: Stick with sRGB unless your pipeline is color-managed otherwise. Mismatched profiles can make a Procreate sky look different once it lands in a comp.
- Layer budget: Higher resolution can limit how many layers you have available. Plan your layer stack before you paint (see below).
- Orientation: Decide now whether the sky will be a locked background or a moving plate. A moving plate needs extra canvas on every side.
A practical layer plan:
- Sky gradient
- Color glows (horizon, nebula, aurora)
- Distant stars
- Bright stars and sparkles
- Moon or planet
- Clouds
- Midground (hills, trees)
- Foreground
Step 1: Build the Base Gradient
A convincing night sky is rarely black. It is a deep blue, indigo, or teal that gets lighter toward the horizon.
- Create a new layer and fill it with a dark, desaturated blue.
- Pick a slightly lighter, more saturated blue and paint a broad band near the bottom of the canvas with a large soft airbrush.
- Open Adjustments → Gaussian Blur, choose Layer, and slide across the canvas until the transition between the two tones disappears.
- Add a darker shade at the top edge with a soft brush and blur again if the transition is harsh.
The Gaussian Blur approach gives you a smoother, more controllable gradient than dragging a brush across the canvas. Because the gradient sits on its own layer, you can later adjust it with Hue, Saturation, Brightness or Curves without repainting.
For palette, a workable starting set is a near-black navy (around the 000925 range), a mid blue, a lighter cyan-blue for the horizon, and a pale icy tint for highlights. Pull colors from a reference photo using the eyedropper rather than guessing. Real night photography shows a lot of teal and violet that pure blue palettes miss.
Step 2: Add Color and Atmosphere With Blending Modes
Flat gradients feel like a placeholder. Blending modes add the glow that makes the sky read as luminous.
- Create a new layer above the gradient and set it to Overlay or Soft Light.
- Paint magenta, violet, or warm orange along the horizon with a large soft brush.
- For brighter spots, duplicate that layer, set the copy to Add (or Linear Dodge), reduce opacity, and blur.
- Use a clipping mask when you want color to stay inside a shape, such as a moon halo or a cloud.
Keep each glow on its own layer. In After Effects you can then animate opacity, hue, or position on individual layers instead of rebuilding the sky for each variation.
Optional: Nebula or Aurora Clouds
For a galactic look, adjust a textured brush's settings and paint large irregular patches on a new layer. Set the layer to Screen or Add, then erase soft channels through it. At least one tutorial takes this approach for nebula clouds, and it works because texture brushes create irregular edges that a basic soft brush cannot.
Step 3: Paint the Moon
The moon is the focal point, so build it carefully.
- Draw a circle. In Procreate you can draw an approximate circle and hold the stylus at the end of the stroke to snap it into a clean shape (QuickShape). Fill it by dragging a color onto it (ColorDrop).
- Turn on Alpha Lock for that layer so color stays inside the shape.
- Add soft shading with a textured brush in slightly darker and slightly warmer grays.
- Add craters with a small, low-opacity brush, then blur them a little so they do not look stamped.
- On a layer below the moon, paint a large soft halo and set it to Add or Screen.
Alpha Lock is a quick way to apply gradients to a shape without spilling over. A clipping mask does the same job without destroying the base layer, which is often the better choice if you expect revisions.
Step 4: Add Stars That Do Not Look Pasted On
Stars are where many night skies fall apart. A uniform sprinkle looks like noise. A believable star field has variation in size, brightness, density, and color.
Distant stars
- Use a small hard round brush at low opacity, or a splatter or spray brush.
- Place stars in clusters, with sparse areas in between.
- Keep them mostly near white, with faint blue and warm yellow tints.
Mid-brightness stars
- Switch to a slightly larger brush.
- Place fewer of them, with irregular spacing.
- Duplicate the layer, blur the copy slightly, and set it to Add to create a soft bloom.
Hero stars
- Paint a handful by hand. A small bright dot plus a tiny cross-shaped flare is enough.
- Put these on their own layer so you can animate a twinkle later.
If you need hundreds of stars quickly, build or install a scatter brush with high jitter and varied size, and tap in short passes. Then reduce the star layer's density by erasing areas to create clusters and gaps. Fewer stars near a bright moon also reads as more realistic, since the glow washes out dim ones.
Step 5: Add Clouds, Silhouettes, and Depth
A sky alone feels empty. A little foreground gives scale.
- Paint thin clouds on a new layer using a soft textured brush at low opacity, then set the layer to Soft Light or Screen so they catch the moon or horizon color.
- Add a dark silhouette layer such as hills, a tree line, or a rooftop. Pine tree brushes and grass brushes are common shortcuts, but hand-shaped silhouettes avoid the repeated-stamp look.
- Add atmospheric perspective: make farther hills lighter and bluer, closer shapes darker.
Separate midground and foreground layers are also what make parallax possible later.
Step 6: Finish, Check, and Export
Before exporting, do a few quality checks:
- Zoom out to thumbnail size. If the moon and horizon glow do not read at that size, strengthen contrast.
- Check for banding in the gradient. Dark blue gradients are prone to visible steps. A very subtle noise layer (Adjustments → Noise) can break them up.
- Toggle layers on and off to verify nothing relies on a hidden layer for its color.
For export, choose PSD to keep layers. After Effects imports PSDs as a composition with layers retained, which is useful for parallax, camera moves, and per-layer effects. Use PNG for a flattened still or a single plate. Procreate's time-lapse export is fine for social content but is not a production asset.
Take the Night Sky Into Motion
A Procreate sky is a strong starting point for a styleframe or a background plate. A few common routes:
- Parallax in After Effects: Import the layered PSD, convert layers to 3D, and add a camera. Stars, clouds, and silhouettes can drift at different rates.
- Twinkle and glow: Animate star layer opacity with an expression such as
wiggle()on a few separated layers, and add Glow or Fast Box Blur adjustments to taste. - Color shift: Use Hue/Saturation or Curves on the gradient layer to animate dusk into night.
- Grain and finishing: Add film grain in the comp to unify the painted layers and reduce banding.
Where Styleframe Fits
If you need more than parallax, such as the sky actually evolving from dusk to deep night, is an AI video and motion tool that may help extend your painted frames into video. You could paint two or three Procreate keyframes (dusk, twilight, full night) and use them as references for generating the transitions between them.
Common Mistakes to Avoid
- Pure black skies: Use deep blue, indigo, or teal. Pure black flattens the image and makes glows look pasted on.
- Evenly spaced stars: Cluster them and vary size and brightness.
- Everything on one layer: You lose the ability to animate, recolor, or revise.
- Too many bright elements: Keep one clear focal point, usually the moon or a horizon glow.
- Skipping a resolution plan: Painting at a small size and upscaling later softens fine star detail. Start at the target size.
Quick Workflow Recap
- Create a canvas at or above your comp resolution in sRGB.
- Paint a dark-to-light gradient and smooth it with Gaussian Blur.
- Add glows on Overlay, Soft Light, or Add layers.
- Paint the moon with Alpha Lock or clipping masks and a halo underneath.
- Layer distant, mid, and hero stars separately.
- Add clouds and silhouettes for depth.
- Check banding and thumbnail readability, then export a layered PSD.
Once those layers are in After Effects, you have a night sky you can parallax, relight, or extend into full motion.