How to Draw a Moon in Procreate
StyleFrame Team8 min read
To draw a moon in Procreate, create a dark canvas, draw a perfect circle on its own layer, and block in pale blue-gray tones with a soft airbrush. Add the darker maria (the large dark patches) and craters on clipped layers with a textured brush, then finish with a subtle outer glow on a separate layer. Keep every element on its own layer and export a PSD or transparent PNG so the moon can be reused in other scenes and composited in After Effects.
What You Need Before You Start
You don't need a complicated setup. A good moon uses a few brushes, a restrained palette, and disciplined layering.
- Canvas: A square canvas at the highest resolution your iPad allows. A larger canvas gives you room to crop, scale, and animate later without softness.
- Brushes: A soft airbrush, a medium airbrush, and one gritty or textured brush for surface detail. Procreate's default Airbrushing and Industrial sets cover all three.
- Palette: Five to seven values, running from a deep blue-gray shadow through mid-tones to a near-white highlight. Avoid pure white until the final pass. Moons read as luminous when the highlights are rationed.
- Reference: A lunar photograph for the placement of the maria and large craters. You're after the pattern, not a photographic copy.
Step 1: Set Up the Canvas and Background
Open a new canvas and fill the background with a very dark color. Solid black works for an isolated moon asset. A deep navy gives a more natural night-sky feel if you plan to paint the surrounding scene in the same file.
Working on dark helps you judge value correctly. A moon looks bright because of contrast with its surroundings, so a pale gray that seems dull on white will glow against black.
Step 2: Draw the Moon Disc
Create a new layer and name it "Moon Base." Pick your mid-tone, then use one of these methods to get a clean circle:
- QuickShape: Draw a rough circle and hold your pencil down at the end of the stroke. Procreate snaps it to a shape. Tap Edit Shape and choose Circle to make it perfect, then fill it by dragging the color swatch into it.
- Ellipse selection: Choose the Selection tool, set it to Ellipse, and drag out a circle. Hold two fingers on the canvas to constrain it to a true circle before filling.
The selection method is useful if you want to reuse the same circle as a mask later. Once the disc is filled, leave the layer as-is and don't paint on it any further. Treat it as the silhouette that every other layer will be clipped to.
Step 3: Block In the Base Tones
Add a new layer above the disc and set it as a clipping mask (tap the layer, then Clipping Mask). Anything you paint here stays inside the moon's edge, so you can paint freely without cleaning up edges.
With the soft airbrush at a large size and low opacity:
- Build up a lighter value toward the area facing the light.
- Let the opposite edge fall into a deeper blue-gray.
- Keep the transition gradual. At this stage the moon should look like a softly shaded ball.
If your moon is full, light it fairly evenly and darken only the outer rim slightly. If you want a crescent or gibbous phase, shift the light source decisively and let the shadow side nearly merge with the background. Painting the shadow with a darker clipped layer is easier to adjust than erasing light areas later.
Step 4: Paint the Maria and Craters
This is where the moon becomes recognizable. Create another clipped layer called "Maria."
Maria
Using your medium airbrush and a darker blue-gray, paint the large irregular dark patches. Study your reference for their rough arrangement, but simplify. These shapes should be soft-edged and varied in size. Drop the layer opacity if they look too heavy. Real maria are low-contrast, and over-darkening them is the most common reason a painted moon looks cartoonish.
Craters
Create a separate clipped layer called "Craters" and switch to a textured brush. Use a small size and varying pressure.
- Paint craters as a lighter rim on the side facing the light and a darker crescent on the opposite interior edge.
- Vary their sizes. A few large craters, several medium ones, and many tiny ones make a convincing surface.
- Avoid evenly spacing them. Clusters and empty areas look more natural.
For the bright ray systems that radiate from large craters, use a small soft brush and short, tapering strokes at low opacity.
Surface Texture
Add one more clipped layer for grit. Dab a textured brush lightly across the disc, then lower the layer opacity until the texture is only just visible. You can also try a Soft Light or Overlay blend mode on this layer for a more integrated result. Subtlety matters here: texture should suggest the surface rather than cover it.
Step 5: Add Shading and Glow
Terminator and Edge Shading
If you're showing a phase, add a clipped layer set to Multiply and paint the shadow side with a deep blue. Soften the boundary between light and dark with a large soft brush. For a full moon, a slight darkening at the limb (the outer edge) gives the disc volume.
Highlights
Add a final clipped layer for highlights. Use your lightest tone, not pure white, and touch only the crater rims and brightest ray areas facing the light.
Atmospheric Glow
Create a layer below the Moon Base layer, not above it. With a large soft airbrush and a pale blue, paint a wide halo around the disc at low opacity. Then try a second, tighter halo closer to the edge. Set the glow layer to Add or Screen if it feels flat. Because the glow is on its own layer, you can scale it, blur it, or change its opacity without touching the moon itself.
Resist the urge to make the glow too large. A big haze washes out the nighttime contrast that makes the moon feel bright.
Step 6: Place the Moon in a Scene
Because the moon is built from separate layers, it can live in many illustrations:
- Paint the scene around it. Add clouds, treelines, or buildings on layers above the moon. For silhouettes, you can use the Selection tool's automatic mode to isolate a subject, fill it with a dark color using Alpha Lock, and position it against the moon.
- Add cloud interaction. Paint thin, dark cloud wisps across the disc on a layer above, with soft edges, so the moon appears to sit behind atmosphere.
- Match the light. Any foreground subject should receive a faint rim light in the moon's color from the correct direction.
Common Mistakes to Avoid
- Pure white highlights too early. Save them for the very end of the painting.
- Hard, uniform craters. Vary size, softness, and opacity.
- Painting directly on the base layer. You lose the ability to adjust the maria, craters, and glow independently.
- Oversaturated blue. A slightly desaturated palette feels more natural. You can push color later with an adjustment layer.
- A perfectly symmetrical shading falloff. Pick a clear light direction and commit to it.
Taking the Moon Into After Effects
Procreate is a good place to build the asset, and After Effects is where it becomes motion.
- Export as a layered PSD if you want to keep the base, maria, craters, and glow separate. Import it into After Effects as a composition.
- Export the moon alone as a transparent PNG if you only need a clean element. Hide the background layer first.
- Animate the layers independently. Slowly scale the glow, add subtle drift to a cloud layer, or use a Gaussian Blur and Glow effect to enhance the halo.
- Work at a larger size than you need. A moon painted on a high-resolution canvas can be scaled down cleanly. Scaling up a small one costs sharpness.
If you plan to use the moon in a 3D scene, paint a flat, evenly lit version and use it as a texture on a sphere in Cinema 4D or Blender, then light it in 3D. Avoid baking strong directional shading into the texture if the lighting will change.
Where Styleframe Fits in the Workflow
Once you have a finished moon painting, is one option for extending it into motion or other treatments while keeping your own artwork as the starting point. Your compositing, color management, and delivery pipeline can stay the same.
Quick Recap
- Start on a dark background and draw a clean circle on its own layer.
- Clip all painting layers to the disc and block in a soft base shading.
- Add maria with a medium airbrush at low contrast.
- Paint craters and texture with a textured brush on separate layers.
- Add a terminator, restrained highlights, and a soft glow behind the moon.
- Export a layered PSD or transparent PNG, then animate it in After Effects or extend it with Styleframe.
Keeping each element on its own layer takes a little more setup, but it makes the moon far more adaptable. You can restyle it, animate it, or drop it into a completely different scene without repainting.