How to Draw a Hexagon in Procreate
StyleFrame Team8 min read
To draw a hexagon in Procreate, open Actions > Canvas > Drawing Guide, switch to the Isometric grid, turn on Drawing Assist, and trace six equal edges: two vertical and four at 30° angles. Procreate has no polygon tool, so a regular hexagon needs a guide or a snapping rotation. The other reliable option is to draw one line, duplicate it, and rotate the copies in 60° steps with Transform snapping. Drawing freehand is the fastest route, but the result is only approximately regular.
Why Procreate Makes Hexagons Awkward
Procreate is a raster painting app. It gives you circles, ellipses, and rectangles through QuickShape, but no polygon tool where you type "6 sides." Artists making hex maps, honeycomb patterns, or geometric logos tend to run into the same problems:
- Hand-drawn edges end up slightly different lengths.
- Interior angles drift away from 120°.
- Scaling a finished hexagon up softens the edges, because the pixels are being resampled.
None of this stops you from getting a clean hexagon. It means you should use the app's snapping features rather than your eye, and know when to move the job to a vector or motion tool.
Method 1: Use the Isometric Drawing Guide
This is the most dependable approach for a pointy-top hexagon, which has a vertex at the top and bottom. The edge directions of a pointy-top hexagon are vertical and ±30° from horizontal, and those are exactly the axes of an isometric grid.
- Create a canvas large enough for your end use. A square canvas of 4000 × 4000 px gives you room to scale down later without losing sharpness.
- Open Actions > Canvas and turn on Drawing Guide.
- Tap Edit Drawing Guide, choose Isometric, and turn on Drawing Assist at the bottom of the panel.
- Adjust grid size until the cells are comfortable to count. A larger grid makes equal edge lengths easier to judge.
- On a new layer, draw the first vertical edge. With Drawing Assist on, your stroke snaps to the guide axis even if your hand wobbles.
- From the top of that edge, draw an upward-sloping edge toward the left and another toward the right, then complete the remaining edges around the shape.
Drawing Assist locks the direction of each stroke but not its length. To keep all six edges equal, count grid intersections along each edge and stop at the same number every time. If you want to check your work, draw a circle from the center. All six vertices should sit on the same circle.
Method 2: Rotate Duplicates With Transform Snapping
This method works well when you want a flat-top or pointy-top hexagon at any size without relying on a grid.
- On a new layer, draw a straight vertical line through the center of the canvas.
- Open Transform (the arrow icon) and make sure Snapping and Magnetics are turned on. Rotation should now snap in increments, and Procreate displays the angle as you drag.
- Duplicate the line layer, then rotate the copy by 60°.
- Duplicate again and rotate by 120° from the original (or another 60° from the first copy).
- Merge the three layers. You now have six spokes of equal length meeting at the center, each 60° apart.
- On a new layer, connect the six endpoints with straight lines. Zoom in so you can place each stroke end exactly on a spoke tip.
- Hide or delete the spoke layer.
Because the three lines rotate around the same center, the vertices all land on a common circle, and a hexagon's circumradius equals its edge length. That is what makes the shape regular.
If the angle readout drifts from a clean 60°, undo and redo the rotation with Snapping toggled on rather than nudging manually.
Method 3: Freehand for Fast, Approximate Hexagons
For thumbnails, quick sketches, or loose layouts:
- Draw six connected straight-ish edges in a single stroke, finishing back at the starting point.
- Redraw any edge that looks noticeably longer or shorter than the others.
Freehand drawing gives you rough edges and does not enforce equal sides. Treat the result as a sketch. If the hexagon is going into a logo, a pattern, or a title card, use Method 1 or 2 instead.
Pointy-Top vs. Flat-Top
Game maps, honeycomb grids, and tech-style motion graphics use both orientations, so decide before you draw.
- Pointy-top: vertices at top and bottom, vertical edges on the sides. Method 1 gives this directly.
- Flat-top: a horizontal edge at top and bottom. Build a pointy-top hexagon, then rotate it 30° (or 90°) with Transform and Snapping on.
When rotating, do it before you fill and finalize, and rotate on the original layer rather than a flattened copy. Each resample of a raster layer softens edges slightly.
Fill and Clean Up
Once you have an outline, fill it so you have a solid shape to work with:
- Select the outline layer and create a new layer beneath it.
- Use ColorDrop by dragging a swatch into the closed shape. If color leaks, increase the Color Fill Threshold or check for gaps at the corners.
- Alternatively, use the Selection tool in Freehand mode and tap the six vertices to define a polygon selection, then fill the selection.
Zoom in to 400% or more and inspect each vertex. Small gaps or overlaps at the corners are the most common flaw, and they show up badly once the shape is scaled in a composition.
Building a Hex Grid or Repeating Pattern
Single hexagons are straightforward. Grids are where Procreate gets difficult. Some users trying to make hex-map brushes for tabletop games report that tiles stop lining up unless the whole grid is painted in a single brush stroke, and that scaling a raster grid degrades its resolution each time. A few practical rules:
- Spacing math: for pointy-top hexagons with edge length s, center-to-center horizontal spacing is √3 × s, vertical row spacing is 1.5 × s, and every other row is offset by half the horizontal spacing.
- Duplicate and move deliberately: build one tile, duplicate the layer, and use Transform with Snapping and Magnetics so each copy moves in controlled steps. Group tiles per row, then duplicate rows.
- Decide the final size first: never scale a finished raster grid. Rebuild at the right size or accept the softness.
- Use vector for precise grids: if the grid has to be mathematically exact, such as for a map, make it in a vector app and bring it in as a reference or placed image.
When to Skip Procreate: Use a Vector or Motion Tool
If the hexagon is a graphic element in a motion piece, Procreate may not be the best place to draw it. A vector or motion tool lets you build the shape precisely and scale it without the softening you get from resampling raster pixels. That is a better fit for animated borders, trims, and infographics.
Procreate is the better choice when you want the hexagon to feel hand-drawn: wobbly ink outlines, textured fills, chalk or pencil edges, or a stylized frame sitting inside illustrated artwork. A sensible split is to draw the character of the shape in Procreate and build the structure in a vector or motion tool.
Getting Procreate Art Into Your Pipeline
- Export as PNG for transparency, or PSD to keep layers separate for compositing in After Effects, Photoshop, or Nuke.
- Draw at the final delivery resolution or higher. A 4K comp needs art that holds up at 3840 × 2160 px.
- Keep outline, fill, and texture on separate layers so you can animate or retime them independently.
- For frame-by-frame animation, you can use Procreate's Animation Assist; check its export options to see what fits your compositing pipeline.
Where Styleframe Fits After the Drawing
A hand-drawn hexagon is often just the first frame of a bigger idea, such as a logo reveal, a honeycomb transition, or a stylized title sequence. is an AI video and motion tool you can explore for taking your Procreate hexagon artwork further. Check the product's site for its current features, supported outputs, and integrations.
Troubleshooting Common Problems
The hexagon looks lopsided. Check that all edges are the same length. Count grid cells in Method 1, or confirm that spokes are equal in Method 2.
Drawing Assist is snapping to the wrong angles. Make sure the Isometric guide is selected, not 2D Grid. Turn Drawing Assist off and on again if strokes ignore the axes.
Corners have gaps after filling. Zoom in and extend each line slightly past the vertex, then erase the overshoot on a layer mask or with the Eraser.
The edges look soft after resizing. Redraw at the target size, or move the shape into a vector workflow for scaling.
Rotation won't land on 60°. Toggle Snapping and Magnetics in Transform, then rotate again from the original layer.
Summary
Use the Isometric Drawing Guide with Drawing Assist for a clean pointy-top hexagon, or duplicate and rotate a line in 60° steps for any orientation. Use freehand drawing only for rough sketches. For exact grids or animated shapes, build the structure in a vector or motion tool and keep Procreate for hand-drawn character.