How to Draw a Grid in Procreate
StyleFrame Team8 min read
To draw a grid in Procreate, open Actions (the wrench icon), tap Canvas, switch on Drawing Guide, then tap Edit Drawing Guide and choose 2D Grid. Set the grid size, color, opacity, and thickness, then tap Done to commit. Turn on Drawing Assist if you want your strokes to snap to the grid lines as you draw.
How to Draw a Grid in Procreate, Step by Step
Procreate's grid is a Drawing Guide, a non-destructive overlay that sits above your artwork. You can adjust or remove it at any time without touching your layers.
- Open or create a canvas. Set your canvas size before you build the grid, because the grid size is tied to the canvas dimensions. If the work is headed for an After Effects comp, match the comp's aspect ratio now.
- Tap the wrench icon to open Actions, then choose Canvas.
- Toggle on Drawing Guide. A default grid appears over the canvas.
- Tap Edit Drawing Guide. This opens the Drawing Guides screen.
- Select 2D Grid. It is the default guide type, so it may already be selected. The other options are Isometric, Perspective, and Symmetry.
- Adjust the settings (covered below), then tap Done to commit. Tap Cancel to leave without saving changes.
On Procreate Pocket, the flow is the same, with two differences. The settings live in a panel you pull up with the grey handle at the bottom, and you confirm with the blue tick instead of Done.
What Each Grid Setting Does
Once the 2D Grid is active, the Drawing Guides screen gives you several controls.
Position and Rotation
Two nodes sit on the grid. Drag the blue Positional node to slide the whole grid across the canvas. Drag the green Rotational node to rotate the lines. This is useful when you want the grid to align with a tilted horizon or a diagonal composition instead of the canvas edges.
To snap back to the default, tap either node and choose Reset.
Appearance
- Color: Use the hue bar at the top of the screen. Pick a color that contrasts with your artwork. Light cyan or magenta usually reads better than gray on dark frames.
- Opacity: Controls how visible the lines are, from invisible to fully opaque. Lower values keep the grid from competing with your sketch.
- Thickness: Controls line weight. Thin lines suit detailed layout work, while heavier ones help when you're working at a distance or on a small screen.
- Grid Size: Sets the scale of each square. A larger value gives you fewer, bigger cells.
Drawing Assist
With Drawing Assist on, strokes are automatically adjusted to follow the direction of the grid lines. That makes it easy to lay down straight, aligned lines for UI layouts, title cards, or architectural elements. Turn it off when you want to use the grid as a visual reference only and keep your natural linework.
Measurement Units (Pocket)
In Procreate Pocket, the Grid Size slider has a numerical input. Tapping it lets you set the grid in pixels, centimeters, millimeters, or inches. This is handy when your canvas already has specific digital or print dimensions.
Sizing the Grid to Match Your Comp
Most motion designers don't need a grid for its own sake. They need one that maps to a frame. A little arithmetic makes the grid useful for layout.
Say you're sketching a 16:9 styleframe on a canvas of 3840 × 2160 px. A grid size of 240 px gives you 16 columns and 9 rows, a clean 16 × 9 grid where every cell is the same proportion as the frame. Some other combinations that work:
- Rule-of-thirds layout: Divide the canvas width by 3. On a 3840 px canvas, a grid size of 1280 px gives three columns, though the rows will need to be checked against the height. Alternatively, use a smaller grid size and mentally group the cells.
- Title-safe and action-safe thinking: Pick a grid size that divides evenly into the frame, then use the outer cells as a rough margin guide.
- Square-based design systems: If your motion graphics use a base unit, such as 60 or 120 px, set the grid size to that unit so your Procreate layouts reflect the same spacing you'll use in After Effects.
Pick a size that divides cleanly into both the width and height. If it doesn't, you'll get partial cells at the edges, which makes it harder to judge proportions.
Using the Grid to Transfer a Reference
A classic use of the 2D grid is observational drawing: breaking a reference image into manageable squares so proportions stay accurate. Here is a workflow that works well for storyboard panels, character poses, and product shapes.
- Create a canvas at a sensible size, ideally above 2000 × 2000 px so you have room for detail.
- Insert your reference through Actions → Add → Insert a Photo, and use uniform scaling so you don't distort its proportions.
- Turn on the Drawing Guide and open Edit Drawing Guide.
- Set a grid size that gives you enough cells to isolate details without becoming noisy.
- Create a new layer above the reference and draw one cell at a time, matching where shapes cross the grid lines.
- When the construction lines are done, hide or delete the reference layer and refine your drawing on a fresh layer.
Because the grid is an overlay, you can lower its opacity as soon as the proportions are locked in and continue drawing without distraction.
Saving a Grid for Reuse: Make a Grid Layer or Brush
The Drawing Guide isn't a layer, so it doesn't travel with your file the way artwork does. If you want a grid that shows up in exports, or one you can reuse across projects, there are two options.
Draw the grid onto a layer. Turn on Drawing Guide with Drawing Assist enabled, create a new layer, and draw lines along the grid with a thin monoline brush. You now have a grid layer that can be toggled, recolored, or exported along with the rest of your file. This is also how you'd make a reference grid to bring into After Effects as an overlay.
Build a grid brush. If you do lettering or layout work, you can turn a grid into a brush. One approach from the community:
- Create a square canvas (for example 3000 × 3000 px) with a black background.
- Turn on the Drawing Guide, set the lines to white, and set the grid size to a quarter of the canvas (750 px).
- On a new layer, place small white circles at each grid intersection, or draw lines for a stamp-style grid.
- Export the result as a JPG.
- Duplicate an existing brush, then import the JPG as its Grain (for a pattern brush) or Shape (for a stamp brush).
- Adjust scale, spacing, and opacity to taste.
Once built, a grid brush lets you stamp guide patterns anywhere without opening the Drawing Guide screen.
Other Drawing Guides Worth Knowing
The 2D Grid is one of four guide types in the same menu:
- Isometric: For technical illustration, game assets, and 3D-looking explainer graphics. It has the same unit options as the 2D Grid in Procreate Pocket.
- Perspective: For perspective setups. Useful for environment concept art before you build the scene in Cinema 4D or Blender.
- Symmetry: For mirrored designs, mandalas, and logo construction.
Switching guide types doesn't affect your layers, so you can try different ones on the same sketch.
Common Problems and Fixes
- I can't see the grid. Check that Drawing Guide is toggled on under Actions → Canvas, and that opacity and thickness aren't set to their minimums.
- The grid is the wrong scale. Reopen Edit Drawing Guide and adjust Grid Size. Remember that scale is relative to your canvas dimensions.
- My strokes aren't straight. Turn on Drawing Assist. Without it, the grid is only a visual aid.
- The grid doesn't appear in my export. It's an overlay, not a layer. Draw the grid onto a layer if you need it baked into the file.
- My lines are fighting with the grid. Lower the opacity, change the color, or turn off Drawing Assist for freehand passes.
Where Styleframe Fits in a Grid-Based Workflow
A grid in Procreate is a layout tool. It helps you plan a composition, keep proportions accurate, and hand off clean frames. Those frames can then become inputs for the rest of your pipeline.
is an AI video and motion tool built for artists who want control over the result. A grid-built layout from Procreate can work as a reference frame in that kind of workflow. For example, you can draw a start frame and an end frame on a consistent grid.
A practical workflow looks like this:
- Block out your composition in Procreate with a grid sized to your frame.
- Export clean layout frames, with or without the grid layer depending on need.
- Use those frames as keyframes or style references in Styleframe.
- Bring the results into your compositing tool, such as After Effects or Nuke, for compositing, color, and finishing.
Quick Recap
- Actions → Canvas → Drawing Guide → Edit Drawing Guide → 2D Grid.
- Move the grid with the blue node, rotate it with the green node, and reset by tapping a node.
- Tune color, opacity, thickness, and grid size, then tap Done.
- Turn on Drawing Assist for snapped strokes, or leave it off for reference-only use.
- Choose a grid size that divides evenly into your canvas so cells match your frame proportions.
- Draw the grid onto a layer if you need it in exports, and build a grid brush if you reuse it often.
With a grid sized to your frame, Procreate becomes a quick, precise layout tool for storyboards, styleframes, and reference work. That's especially true when those drawings feed into the rest of your motion pipeline.