How to Draw a Forest Background in Procreate
StyleFrame Team8 min read
To draw a forest background in Procreate, work from back to front on separate layers: flat sky fill, then a pale distant tree line, a darker midground, and finally the foreground trunks and foliage. Use soft airbrushes for haze and light, a hard brush or Studio Pen for trunk edges, and keep each depth plane on its own layer. For motion work, build the canvas at your comp resolution and export a layered PSD, so the planes can be separated in After Effects for parallax.
Set Up the Canvas for Motion Work
Many Procreate forest tutorials start on the default A4 canvas (297 × 210 mm at 300 DPI) with the standard sRGB profile. That is fine for a print illustration or a style study. For a background that will be animated, set up differently:
- Create a custom canvas at your comp size or larger. If you deliver at 3840 × 2160, start there. If you plan camera moves or parallax, go wider than the frame so layers can slide without revealing edges.
- Check the layer budget. Plan your depth planes before you start so you don't run short of layers halfway through.
- Keep the color profile sRGB unless your pipeline requires something else. It is Procreate's default profile and keeps things predictable on import.
- Build a palette first. Procreate lets you enter hex codes in the Value section of the color panel and save the swatches to a palette. You can also import a palette from a file. A fixed palette of 10 to 15 colors keeps the forest cohesive.
Choose your palette by depth rather than by object. You want a light, desaturated, slightly cool color for the far planes, mid-value greens for the middle, and your darkest, most saturated colors for the foreground. This one decision does more for readable depth than any brush choice.
Block In the Sky and the Base Value
Start with a flat color. Drag a color from the color circle onto the canvas to flood-fill it, then add a new layer above it.
For a forest, the sky is often just a sliver visible through the canopy, so keep it simple:
- Fill the background with your lightest or mid-toned sky color.
- On a new layer, use a soft airbrush at a large size to paint a gentle gradient. Make it lighter near the horizon and where light will enter the scene.
- If you want clouds, the Elements category has a clouds brush that works with loose circular strokes. Keep the shapes soft and low-contrast so they never compete with the trees.
Next, add a layer for the farthest ground or hill line. A common approach is to start at roughly mid-height on one side, dip into a shallow valley in the center, and rise again on the other side. Leave generous space above for canopy and a little less below for the forest floor. If the placement looks off, use Transform to nudge the whole layer rather than repainting it.
Build Depth With Tree Planes
This is the core of the drawing. Work in at least three planes, each on its own layer (or layer group).
Far Plane: Silhouettes in Haze
Use a mid-sized soft brush and a color only slightly darker than the sky. Paint vertical trunk shapes and clumps of canopy as simple silhouettes. Do not add detail. The goal is a shape that reads as "trees, far away."
Lower the layer's opacity or push the color toward the sky tone until the plane sinks back. If you want a misty look, add a second layer on top and paint a soft horizontal band of light color across the trunk bases.
Midground: Rhythm and Variation
Switch to a darker green and a harder-edged brush. A Studio Pen from the Inking set or a hard airbrush works well. Vary these things deliberately:
- Trunk width. Mix thin saplings with a few thick trunks.
- Spacing. Avoid evenly spaced trees. Cluster some and leave gaps.
- Lean. Slight tilts break the barcode effect that makes digital forests look artificial.
Add canopy masses with a textured or foliage brush. Procreate's Organic set includes brushes suited to leaf clusters. Paint in big shapes first, then carve into them with a smaller brush to suggest light coming through.
Foreground: Contrast and Detail
The foreground gets your darkest values, your most saturated colors, and your sharpest edges. Place one or two large trunks near the frame edges to create a natural frame, then add ferns, roots, rocks, or mossy ground in front.
Keep the foreground sparse. If everything is detailed, nothing reads as close. Use texture only where the eye should land.
Add Light, Atmosphere, and Mood
A flat stack of green planes becomes a forest when you add light.
Sun rays and shafts
- Create a new layer and set it to Add or Screen.
- Use a soft brush in a warm pale yellow and paint long diagonal wedges from the light source.
- Erase or lower opacity where rays pass behind foreground trunks. Painting a mask-like cutout around trunks makes the rays feel like they exist in the space.
Atmospheric perspective
- Lighter, cooler, lower-contrast planes read as farther away.
- Add a haze layer between each depth plane. A single low-opacity gradient layer between midground and far plane often does more than extra detail.
Glow and magic
- For fantasy or firefly-style scenes, work with a dark palette and add small light sources in a high-contrast layer with a soft glow. A small bright dot on a dark layer, with a larger low-opacity soft halo behind it, is enough.
- Keep the number of glowing elements small. They are focal points, not texture.
Color temperature
- Pick a dominant temperature. A mossy path might lean yellow-green and warm. A moonlit scene leans teal and blue.
- Add an accent from the opposite side of the wheel, such as warm light in a cool forest, so the scene has a focal point.
Add Texture and Surface Detail
Once the structure works, add detail sparingly.
- Moss and bark: Use a grainy brush or a chalk-style brush at low opacity over trunks, rocks, and the forest floor. Clip the texture to the layer below using Clipping Mask so it does not spill outside the shapes.
- Leaf litter and ground cover: Scatter small marks with a textured brush at varying sizes, and lean toward the foreground for larger marks.
- Edge variation: Soften a few edges with a smudge tool or low-opacity airbrush, and keep a few crisp. Uniform edges look mechanical.
Check your drawing in grayscale from time to time. If the planes do not separate by value alone, color will not rescue them.
Prepare the Artwork for After Effects
If the background is going into an animation or edit, treat the Procreate file as a layered asset, not a finished image.
- Name your layers by depth:
sky,far_trees,mid_trees,fg_trunks,fg_plants,rays,haze. - Paint beyond the frame. Extend trunks, canopy, and ground past the canvas edges you expect to see, so a camera move or parallax drift does not reveal empty areas.
- Keep light effects on their own layers so you can adjust blend modes and opacity in the comp.
- Separate any element you may want to animate, such as drifting fog, rays, or fireflies.
- Export a layered PSD and import it into After Effects as a composition with retained layer sizes. For other tools, export PNG sequences or flattened versions of individual layer groups.
In After Effects, place the layers in 3D space or use scale-and-position offsets to create parallax. The far plane should move least, the foreground most. Add a subtle camera drift and animate the haze and ray layers for a living feel.
Where Styleframe Fits in the Workflow
Procreate gives you complete control over the look of a still background. Styleframe is an AI video and motion tool you can use when you want that look to carry into motion or into other shots, while still working from your own references. The painting stays yours, and compositing stays in the tools you already use.
Common Mistakes to Avoid
- Painting everything at the same value. The result is a flat green wall. Separate your planes by value first.
- Over-detailing the background. Detail belongs where the viewer should look.
- Merging layers too early. Once flattened, you lose the ability to separate depth in the comp.
- Forgetting overscan. Parallax exposes any area you did not paint.
- Using pure black for shadows. Tint shadows with a deep green or blue so they sit within the palette.
A Quick Workflow Summary
- Create a custom canvas at your target resolution, set to sRGB.
- Save a depth-ordered palette.
- Flood-fill and paint the sky gradient.
- Block in far, mid, and foreground tree planes on separate layers.
- Add haze between planes.
- Paint sun rays or glow on Add or Screen layers.
- Add texture with clipped, low-opacity brushes.
- Name layers, extend beyond the frame, and export a layered PSD.
- Build parallax in After Effects, and use Styleframe where you need reference-driven motion or restyling.
The brushes matter less than the structure. A forest that reads well has clear depth, a controlled palette, and one place where the light is strongest. If those three things are in place, the background will hold up whether it stays a still or becomes a moving shot.