How to Draw a Donut on Procreate
StyleFrame Team8 min read
To draw a donut in Procreate, sketch an oval ring on a square canvas, fill it with a dough color, cut out the hole with an Ellipse selection, then add a wavy icing shape on a new layer. Shade and highlight on clipping-mask layers so each layer stays editable, and finish with sprinkles on their own layer. The whole thing can be done with the default Procreate brushes, and it leaves you with a layered file you can export to After Effects for animation.
What You Need Before You Start
- Procreate on an iPad, with an Apple Pencil or a similar stylus.
- A square canvas. 2500 × 2500 px works well for a single illustration. If you plan to animate or zoom in later, go larger (3000 × 3000 px or more) so you have room to scale.
- A small palette of 6 to 8 colors: dough (golden tan), darker dough for shadows, icing (pink is the classic choice), a darker icing tone, an icing highlight, and 3 to 4 sprinkle colors.
- One smooth line brush and one textured brush. The Monoline brush in the Calligraphy set is a good clean choice, and any grain-style brush from the Sketching or Painting sets works for texture.
Set your palette up first as a saved Procreate palette. Picking colors as you go can make donut illustrations look muddy.
Step 1: Set Up the Canvas and Background
Create your canvas and fill the background with a flat color that contrasts with the donut. A saturated blue or teal makes pink icing pop. Keep the background on its own layer and name it. You'll want to hide it later when you export a transparent version.
Turn on the Drawing Guide (Actions > Canvas > Drawing Guide > Edit Drawing Guide) and choose a 2D Grid if you want help centering the donut. This is optional, but it helps when the donut will be animated around a center point.
Step 2: Draw the Dough Ring
- Add a new layer and name it "Dough."
- Pick your dough color. Draw an oval with a smooth brush, and hold your pencil at the end of the stroke so QuickShape snaps it into a clean ellipse. Use the Edit Shape option to adjust the ellipse before you commit.
- Drag the color swatch into the shape to fill it (ColorDrop). Make sure the shape is fully closed, or the fill will spill across the canvas.
Now cut the hole:
- Open the Selection tool (the S-shaped ribbon icon) and choose Ellipse.
- Draw an ellipse where the hole should sit. It should be slightly above center, because the hole in a donut seen from a three-quarter angle sits higher than the middle of the shape. If it lands in the wrong spot, undo with a two-finger tap and try again.
- Instead of erasing, add a layer mask to the Dough layer with the selection active, then fill the hole area on the mask with black. The hole is hidden rather than deleted, so you can resize it later.
Using masks here is a habit worth building. It keeps the file non-destructive and carries over cleanly if you open the PSD in another tool.
Step 3: Add the Icing
- Create a new layer above the dough and name it "Icing."
- Pick your icing color. Trace along the top edge of the dough with a loose, wobbly outline, staying slightly inside the outer edge on the top and letting the shape drip down the sides in uneven lengths. The inconsistency is what makes it look like real glaze.
- Fill the shape. Then repeat the hole: make an ellipse selection slightly larger than the dough hole and mask it out, so the icing wraps around the opening rather than stopping short.
Tip: if your lines come out shaky, open the brush settings (tap the brush in the Brush Library) and raise StreamLine. Higher values smooth the stroke, which is helpful for icing edges and the dough outline.
Vary the drip shapes. Make a couple long, a couple short, and one rounded. Evenly spaced drips look mechanical.
Step 4: Shade With Clipping Masks
Clipping masks let you paint shadows and highlights that stay inside the shape beneath them.
- Add a new layer above "Dough," tap it, and choose Clipping Mask. Name it "Dough Shadow."
- Pick a darker dough tone. Paint shadow along the bottom of the ring, around the inner edge of the hole, and anywhere the icing would cast shade onto the dough. Use a soft brush or the Smudge tool to blend.
- Add another clipped layer above "Icing" and name it "Icing Shadow." Use a darker pink along the lower edges of the drips and near the hole.
- Add a final clipped layer for highlights. Use a lighter icing tone and paint a curved highlight on the upper left of the icing, plus small glints on the drip ends. Keep highlights sparse. A few confident strokes read as glossier than a lot of soft ones.
A second option is Alpha Lock. Tap a layer with two fingers and swipe right to lock transparency, so painting only affects existing pixels. Clipping masks are more flexible for animation prep because shading stays on a separate layer.
Add dough texture
For a baked look, add a clipped layer over the dough and use a textured brush at low opacity to create subtle speckles. Set the layer to Multiply for darker spots or Overlay for lighter ones, and reduce its opacity until the texture is just visible.
Step 5: Draw the Sprinkles
- Create a new layer named "Sprinkles" above the icing, and clip it to the Icing layer so the sprinkles can't land on the dough or the background.
- Use a small round-ended brush (the Monoline brush at a small size works). Draw short, rounded strokes at varying angles.
- Switch colors every few strokes. Keep sprinkles clustered unevenly, with some areas denser and some bare.
- Add a tiny shadow layer beneath the sprinkles (clipped to the icing) by duplicating the sprinkles layer, locking its alpha, filling it with a darker pink, and nudging it down and slightly right.
Resist the urge to rotate them evenly. Real sprinkles overlap and sit at random angles, and a few overlaps add believability.
Step 6: Add a Ground Shadow and Final Polish
- Add a new layer beneath the donut and paint a soft, flattened ellipse in a darker background tone. Blur it with Gaussian Blur (Adjustments > Gaussian Blur) at a low percentage.
- Zoom out and check the silhouette. If the donut reads as a flat sticker, increase contrast between the shadowed underside and the highlight on top.
- Check value separation by temporarily adding a black-and-white adjustment layer or duplicating and desaturating the canvas. If the icing and dough blend into the same gray, adjust.
- Name every layer and group related ones (Dough, Icing, Sprinkles, Shadow). Clean organization is the difference between a file you can animate and a file you have to redraw.
Common Mistakes to Avoid
- Unclosed fills. If ColorDrop floods the canvas, undo and close the gap or lower the ColorDrop threshold.
- A perfectly centered hole. Place it slightly high for a more natural perspective.
- Everything on one layer. You can't isolate sprinkles or shadows later without redrawing.
- Uniform drips. Vary the length, width, and spacing.
- Too many colors. Stick to your palette. The harmony matters more than detail.
Taking Your Donut Into Motion Work
If you're a motion designer, a Procreate donut is a handy starting asset. You can export it as a layered PSD or as separate PNGs with a transparent background, then bring it into After Effects, where a well-organized, named layer structure gives you separate elements to animate. From there you can animate sprinkles falling, icing dripping with a puppet tool, or the donut bouncing in a looping scene.
Procreate also has Animation Assist for frame-by-frame animation inside the app, which suits short loops, but it isn't built for the kind of compositing, camera work, or finishing that After Effects handles.
If you want to push the illustration further without redrawing it, Styleframe can serve as an extension of that workflow. It's an AI video and motion tool built around artistic control rather than one-click output. Each generation is driven by your own reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier results. A few practical ways it could apply to your donut:
- Frames-to-Video: Use two or more illustrated keyframes (for example, the donut before and after a bite is taken) and generate the motion between them.
- Restyle and Ink-and-Paint: Use a reference image to carry a style (marker, ink, or paint) across your illustration or footage.
- 2D-to-3D and Turntable: Turn the flat donut into a 3D-style asset and generate a rotating view, which is useful for product-style shots or reference.
- Remove Background: Clean up the cutout.
You keep your layers, your comp, and your finishing steps, with Styleframe handling the generative step in the middle.
Quick Recap
- Create a square canvas and a saved palette.
- Draw the dough with QuickShape, and mask out the hole using an Ellipse selection.
- Add icing on its own layer with irregular drips.
- Shade and highlight with clipping masks and Alpha Lock.
- Add sprinkles on a clipped layer, with varied angles and colors.
- Add a ground shadow, check values, and organize your layers.
- Export a layered PSD or transparent PNGs for use in After Effects or other tools.
Once you have this workflow down, the same layer structure (base shape, clipped shading, clipped detail, shadow) applies to almost any object you draw in Procreate. A donut is a good first project because it covers selections, masks, clipping, and layering in one small, forgiving piece.