How to Draw a Body on Procreate
StyleFrame Team7 min read
To draw a body in Procreate, start with a loose gesture line on a new layer, block in the figure with simple shapes using the eight-head proportion as a guide, then lower that layer's opacity and refine the contours on a new layer above. Keep the head, torso, arms, and legs on separate layers so the figure stays easy to adjust, and so it can be rigged or animated later. The steps below cover the full process and then show how to hand the drawing off to a motion pipeline.
Set Up the Canvas Before You Draw
A little prep saves a lot of rework, especially if the drawing is headed for After Effects or another compositing tool.
- Canvas size: Match your delivery format. A 3840 × 2160 canvas gives you a 4K frame, but larger canvases reduce how many layers Procreate allows on your iPad, so check the limit under Canvas Information before committing.
- Color profile: Use RGB and pick a profile that matches your project. Mismatched profiles are a common reason colors shift once the art lands in a comp.
- Background: Hide or delete the default white background layer if you plan to export transparent PNGs or a layered PSD.
- Brush: Pick a monoline or lightly textured pencil for construction, and a cleaner inking brush for final lines. Turn Streamline up a bit for smoother curves.
Create at least four layers to begin with: gesture, construction, line art, and color. Name them now. Layer names carry over in a PSD export, and tidy names matter once someone else opens the file.
Step 1: Capture the Gesture
The gesture line sets the pose before anatomy gets in the way. On your first layer, draw one flowing curve for the spine, from the base of the skull through the pelvis. Add a second, shorter line through the shoulders and another through the hips.
Where those lines tilt against each other is what makes a pose feel alive. Shoulders and hips usually angle in opposite directions when weight shifts onto one leg. Spend thirty seconds on this stage, not five minutes. Quick gestures are the point.
If you need practice material, use a timed figure-drawing reference tool that cycles through photos at set intervals (from 30-second gestures to ten-minute studies) and keep Procreate open alongside it. Quick timed sessions build the habit of drawing the whole figure at once, not one part at a time.
Step 2: Block In Proportions
Once the gesture feels right, lower that layer's opacity and add a new layer for construction. The classic starting point is the eight-head rule: the figure stands about eight heads tall, with the head at the top, shoulders and upper chest in the second unit, lower torso in the third, the pelvis near the fourth, and thighs, knees, shins, and feet filling the rest.
You can set this up quickly in Procreate:
- Turn on Drawing Guide in Canvas settings and choose 2D Grid, then adjust the grid size so eight rows span the figure's height.
- Draw an oval for the head and use it as your unit of measure.
- Mark the eight divisions with short horizontal ticks along the spine line.
Treat the eight-head rule as scaffolding. Heroic or stylized characters often run taller than eight heads, while cartoon characters often run much shorter. Having a standard to deviate from is what makes your deviations look intentional.
Step 3: Build the Figure from Simple Forms
Now construct the body with basic volumes:
- Head: an oval, with a cross-contour line showing which way the face points.
- Ribcage: an egg or bean shape, tilted along the shoulder line.
- Pelvis: a smaller, boxier shape, tilted along the hip line.
- Limbs: cylinders or tapered tubes, with circles at the joints (shoulders, elbows, wrists, hips, knees, ankles).
- Hands and feet: mitten and wedge shapes for now. Detail comes later.
Draw through the forms. Sketch the full shape of a limb even where another part will overlap it. This keeps overlaps believable and makes foreshortening easier.
Procreate's QuickShape (draw a circle or line and hold) helps you place clean ovals and straight guides. Use the Transform tool to scale or rotate a limb without redrawing it. If a leg is too short, select it, then drag it into place instead of starting over.
Step 4: Refine the Contours
Drop the construction layer to a low opacity and create a new layer above it. Now draw the actual outline, using the shapes underneath as support rather than something to trace slavishly.
A few habits make a big difference:
- Vary line weight. Heavier lines go on shadow sides and overlaps, lighter lines on the lit side.
- Look for the big shapes first. Define the torso silhouette and leg shapes before you worry about muscle detail.
- Simplify. For illustration and motion work, a readable silhouette beats a fully rendered anatomy chart.
- Use Liquify sparingly. It's good for nudging proportions late in the process, but it can soften line edges.
Check the figure by flipping the canvas horizontally (Canvas > Flip). Asymmetries you stopped seeing become obvious right away.
Step 5: Add Clothing, Color, and Shading
Put flat color on a layer beneath the line art. Use ColorDrop or a hard brush with a selection, and keep each major element (skin, hair, top, trousers, shoes) on its own layer or in a clearly named group.
For shading, create a layer above the base color and set it as a Clipping Mask. That limits the shading to the shape below it, so you can paint freely without spilling past the edges. Multiply works well for shadows, and Add or Screen for highlights. Alpha Lock does a similar job for quick tonal changes on a single layer.
Step 6: Prepare the Body for Animation
This is where drawing for illustration and drawing for motion diverge. A single flattened figure is fine for a poster, but animators need parts they can move. Before you export:
- Separate the limbs. Put the upper arm, forearm, hand, thigh, shin, and foot on their own layers.
- Paint the hidden areas. Extend the shoulder under the torso overlap, and complete the top of the thigh behind the pelvis, so joints don't reveal gaps when rotated.
- Keep the head modular. If you want blinks, mouth shapes, or head turns, put the eyes, mouth, and hair on separate layers.
- Name everything clearly. Something like
arm_L_upperis much better thanLayer 47.
Then export as a layered PSD. After Effects imports PSD files as a composition with the layers intact, and you can set anchor points at the joints and parent the layers for a puppet-style rig. Rigging tools in After Effects can handle the rest.
If you'd rather keep your art frame-by-frame, Procreate's Animation Assist lets you draw short sequences directly. Export those as PNG sequences or an animated file and bring them into your editor. It's well suited for quick tests and rough pose animation, but long-form character work usually moves into a dedicated animation or compositing tool.
Common Mistakes to Avoid
- Skipping the gesture. Starting with outlines produces stiff figures. Gesture first, always.
- Treating the eight-head rule as law. It's a measuring stick, not a requirement.
- Merging layers too early. Once the limbs are flattened together, rigging gets painful. Keep a layered master file and merge only in a duplicate.
- Ignoring overlaps. Joints that look fine in a static pose break when rotated if you haven't painted the hidden areas.
- Drawing small. Low-res art becomes soft when scaled in a comp. Work at your target resolution or higher.
A Simple Practice Routine
Skill with figures comes from repetition. A routine that works well in Procreate:
- Do ten 30-second gesture drawings on a single layer.
- Pick your best gesture and build it into a full construction on a new layer.
- Refine one of those into clean line art and flat color.
- Separate the parts and export a PSD, then test a basic rotation of one limb in After Effects to see whether the joints hold up.
That last step closes the loop. Seeing where a drawing fails under motion teaches you what to paint differently next time, and over a few rounds your figures will become both better-looking and easier to animate.