How to Draw a Beard on Procreate
StyleFrame Team8 min read
To draw a beard in Procreate, start with a reference photo, sketch the beard's outline on a guide layer, fill that shape with a soft dark base tone for shadow, then build up individual hair strokes on separate layers above it. Use a sharp pen or a dedicated hair brush, vary the direction and length of every stroke, and finish with lighter highlights and a rough, broken hairline. Working in layers lets you adjust density, color, and shape without repainting.
This guide walks through that process in order, then covers how to prepare the artwork if it's headed into a motion or compositing pipeline.
What You Need Before You Start
You don't need much, but a few choices make beards easier to control.
- Canvas: A portrait canvas of 3000 × 4000 px at 300 dpi gives you room to zoom in on individual hairs and still export something usable. If the beard will end up in video, consider a canvas that matches your comp's aspect ratio instead.
- A reference photo: Import one through the Actions (wrench) menu using Add > Insert a photo. Drawing over a photo teaches you how facial hair actually grows and clumps, which is the hardest part to invent from memory.
- A sharp pen and a soft brush: Studio Pen works well for outlines, and any soft airbrush handles the base tone.
- Optional hair brushes: Stubble, single-strand, and multi-strand brushes speed things up considerably. Many are free in the Procreate Folio community or sold in brush packs. To install a downloaded set, open the file, tap the share/export option, and choose Copy to Procreate.
Step 1: Map the Beard Shape
Create a new layer above your reference and choose a bright color that won't match the final beard, such as cyan or magenta. With your sharp pen, trace the outer boundary of the facial hair: along the cheek line, around the jaw, across the chin, and down the neck if the beard extends there. Include the mustache area if it's part of the design.
This line doesn't need to close perfectly. It's a guide for where the base color goes, and you'll delete it later. Spending a minute here saves you from stray color and uneven edges downstream.
Step 2: Block In the Base Tone
Add a new layer beneath the guide and above any face layer. Pick a mid-to-dark tone that matches the beard's overall color, such as dark brown for brown hair or charcoal for a gray beard. Using a soft brush, fill the area inside your guide.
This layer acts as the shadow and mass of the beard. Real beards aren't a flat color; the roots and the underside are darker than the tips. A soft, slightly uneven fill gives later strokes something to sit on.
Next, use the eraser with the same soft brush to clean up any color that crossed the guide line. Keep the erased edges soft. A hard edge now will look like a sticker later. Once you're satisfied, hide or delete the guide layer.
If there's stubble creeping down the neck or up the cheeks, add a light dusting of the base tone there with low pressure. Subtle is better, since this area is easy to overdo.
Step 3: Add Individual Hairs
This is where the beard starts to look like a beard. Create a new layer above your reference photo and name it something clear, like "hairs dark." Lower the reference photo's opacity (a two-finger tap on the layer in Procreate lets you drag opacity down) so you can see your own strokes against it.
Choose a brush:
- Studio Pen or a similar sharp brush gives you total control, one hair at a time.
- A multi-strand hair brush lays down several hairs in a single stroke, which is much faster and still looks natural if you vary pressure and angle.
Some principles that make the biggest difference:
- Follow growth direction. Cheek hair generally grows downward and slightly forward, neck hair downward, and mustache hair outward and down from the center. Study your reference before committing.
- Randomize everything. Hairs that are perfectly parallel, evenly spaced, or identical in length look like a pattern fill. Mix up curvature, length, and spacing. Cross a few strands over each other.
- Work in sections. Start at the mustache, move to the cheeks, then the chin and neck. Zoom in tight on each section.
- Vary stroke size. Smaller, shorter strokes near the edges and skin; longer, heavier strokes toward the center of the chin.
- Use pressure. Hairs taper. A pen with natural pressure response makes tapered ends automatically.
If you use a brush with a Streamline setting, raising it to about half smooths out wobble in longer strands. Open the brush settings and adjust the stabilization if your hairs look shaky.
Step 4: Build Depth With Light and Dark Layers
A single layer of dark strokes looks flat. Add separate layers for each tonal group so you can adjust them independently.
- Dark layer: Deep strands in the undercut of the jaw and along the neck, which pushes the beard back in space.
- Mid-tone layer: The bulk of the hair, in the main color.
- Highlight layer: Lighter strokes catching light along the cheeks and the front of the chin. For a gray or white beard, this is where you'll do most of the visible hair work, using light gray or off-white strokes over a dark base.
Placing each tone on its own layer means you can lower the opacity of a highlight that's too loud, or recolor a whole group with a color adjustment, without touching the rest.
For a graying beard, scatter light strands unevenly, with more at the chin and mustache corners and fewer toward the sideburns. Even gray distribution looks artificial.
Step 5: Refine the Hairline and Edges
The edges are what sell realism. A beard with a clean, solid outline looks like a mask.
- Use a small, sharp brush or a stubble brush to push tiny hairs outward past the base tone along the cheek line.
- Break up the neckline with short, scattered strokes that fade into skin.
- Add a few flyaway strands near the mustache and below the lower lip.
- If you'd rather not draw every edge strand, a dedicated beard-line brush can speed this up. Tweak the result with the eraser so it doesn't look stamped.
Hide your reference photo periodically to check how the beard reads on its own. If it looks too uniform without the photo behind it, add irregular clumps and a few gaps.
Step 6: Adapt the Technique for Different Styles
Stubble: Use a stubble or speckle brush with low opacity on a soft base tone. Build it up in passes, and keep density heavier around the chin and upper lip.
Long or curly beards: Think in clumps rather than single hairs. Draw the overall flowing shape first with a large soft brush, then add curved, overlapping strands that follow the flow. Curls need S-shaped strokes that cluster and overlap.
Stylized or cartoon beards: Skip the reference photo and block in bold shapes, then add a handful of directional lines to suggest texture. Fewer, cleaner strokes read better at small sizes.
Gray or white beards: Start with a mid-dark gray base, then layer lighter strands on top, since the contrast between the base and the highlights gives the beard its volume.
Preparing Your Beard Art for Motion or Compositing
If your beard drawing is going into an animation or video project, a few habits will save you time.
- Separate the beard from the face. Keep it on its own layer group so you can export it with transparency.
- Name your layers. "Beard base," "hairs dark," "hairs highlight," and "flyaways" will make sense when you open the file in another tool.
- Export a layered file. Choose a layered format your compositing tool can open. For flat deliveries, export a file with a transparent background.
- Keep your canvas size intentional. Draw at the resolution you'll need so you aren't upscaling a small beard to fit a 4K frame.
- Hide the reference. Make sure the photo layer is off or removed before you export, to avoid accidentally publishing a traced-over photo.
Taking a Procreate Beard Into Animation
A static beard drawing can become a character design, a style reference, or a set of keyframes. For beard work specifically, a practical approach is to paint the hero beard frames in Procreate, use them as stylistic anchors, and finish grading, tracking, and compositing in your usual tools.
Common Mistakes to Avoid
- Perfectly uniform strokes. If your beard looks like a texture overlay, vary the angle, length, and spacing.
- A hard outline around the base color. Keep the edge soft and let hair strokes break it up.
- Putting everything on one layer. You lose the ability to fix problems without redrawing.
- Ignoring the skin underneath. Stubble and thin beards should let skin tone show through. Don't paint opaque color over the face.
- Skipping reference. Even experienced illustrators check how hair clumps and how density changes across the face.
Quick Recap
- Set up a high-resolution canvas and import a reference photo.
- Draw a guide outline on its own layer.
- Fill the base tone with a soft brush and erase the overflow.
- Add hair strokes in layers, randomizing direction, length, and spacing.
- Build dark, mid-tone, and highlight layers separately.
- Roughen the hairline and add flyaways.
- Export layered or transparent files if the beard is going into motion work.
Once the process is familiar, the main variable is brush choice. A good stubble brush and a multi-strand hair brush will cover most styles, but the realism comes from observing real beards and treating every stroke as slightly different from the last.