How to Do Tessellations Procreate
StyleFrame Team8 min read
To make a tessellation in Procreate, draw a shape that fits edge to edge with copies of itself, then use a square canvas, a grid or drawing guide, and layer duplication to repeat it with no gaps or overlaps. The most reliable method is the offset technique. Draw your motif on a square tile, shift the artwork halfway across the canvas so the seams land in the middle, fill the exposed gap, and repeat the process vertically. Export the finished tile and test it as a repeating pattern before you commit to it.
What a tessellation needs from your canvas
A tessellation is a pattern of shapes that covers a surface completely. The shapes don't overlap, and no gaps are left between them. Squares, triangles, and hexagons do this naturally. Organic motifs like fish, birds, and leaves only do it when each edge is drawn to match its neighbor.
You can build the effect from a few habits:
- A square canvas, so the tile wraps cleanly in both directions.
- A visible grid or guide, so you can measure and align.
- Duplicated layers moved by exact amounts.
- A seam check to catch mismatches before you export.
If you already work in a compositing tool, you may be used to letting a tiling effect hide imperfect edges. A tessellation drawn by hand has to be correct at the source, because any mismatch repeats across the whole surface.
Step 1: Set up the canvas
Create a square canvas. Pick a resolution generous enough that you can scale the tile up later, since repeating a small tile across a 4K frame magnifies every soft edge. Keep the canvas size a clean, even number so the half-way offset lands on a whole pixel.
Turn on a drawing guide and choose a grid. Adjust the grid spacing so it divides the canvas evenly. A grid that splits the canvas into equal quarters makes it easy to find the center lines and edges later. Some versions of the app may also offer snapping or magnetic behavior when you transform layers. Enable it if your version has it, because manual nudging by eye is where tessellations go wrong.
Create these layers up front:
- A background layer you can hide.
- A sketch layer for rough construction.
- A clean line or fill layer for the final motif.
Keeping construction work separate means you can discard guides without touching the final art.
Step 2: The offset method for a seamless tile
This is the method to learn first because it works for almost any motif.
Draw the motif in the center
Draw or place your shape near the middle of the tile. Keep it simple at first. A set of overlapping leaf shapes or a cluster of geometric forms works well. Don't let the motif touch the canvas edge yet.
Shift the artwork by half the canvas
Select the layer, then move it exactly half the canvas width to the right. If snapping is available and turned on, it may lock to the guide. Anything that moves off the right edge needs to wrap around to the left side. Do this by duplicating the layer and moving the copy exactly one canvas width in the opposite direction, so both halves of the artwork appear on the canvas. Merge the two layers.
Now the original center of your motif sits along the seam, and the empty space sits in the middle of the canvas.
Fill the exposed center
Draw new elements in the gap. Because the seams are now in the center of the canvas where you can see them, you can make sure forms flow across them without a visible break. Work with the edges in view rather than hiding them.
Repeat vertically
Do the same shift vertically by half the canvas height, wrapping the overflow with a duplicated layer. Fill the new gap. When you shift back, the tile should still look continuous at all four edges.
This offset trick is the same logic behind seamless texture work in any raster tool. If you've made tileable textures for Cinema 4D or Blender materials, it's the same process with a different brush.
Step 3: Build an Escher-style tessellation by modifying a shape
If you want interlocking creatures or shapes instead of a field of decoration, the approach is different. You start with a basic tiling shape, usually a square, and alter its edges.
- Draw a square matching your tile size.
- Cut a shape out of the left edge.
- Move that exact cut piece to the right edge, so it protrudes outward where the left side was indented.
- Repeat the cut-and-move on the top and bottom edges.
- Refine the resulting outline until it suggests a figure, such as a bird, a fish, or an abstract character.
The rule is that whatever you remove from one side must be added to the opposite side. Use duplicated layers and exact movement by one tile width or height so the piece lines up. Because the area removed equals the area added, copies will fit together without gaps.
Once the outline works, duplicate the finished shape and arrange the copies in a grid. For a more interesting result, flip every second row horizontally, or rotate alternate copies. Both give you reflection and rotation variants without redrawing.
Step 4: Use symmetry for rotational and mirror patterns
If your version offers a symmetry drawing guide, it can mirror your strokes automatically so you draw once and get repeated results. Radial symmetry, where available, is useful for rosette-style tiles and kaleidoscopic motifs.
Be aware that symmetry alone doesn't guarantee a seamless tile. It mirrors your strokes across axes inside the canvas, but it doesn't make the left and right edges match. For repeatable results, combine symmetry with the offset check from Step 2. Use symmetry for fast ideation, then verify the edges.
For hexagonal or triangular tessellations, turn on an isometric or custom grid guide if your version offers one. Otherwise, build a single hexagon or triangle precisely with a shape tool, then duplicate and position copies carefully.
Step 5: Test the tile before exporting
Never trust a tile you've only seen as a single image. Test it in one of these ways:
- Duplicate the layer group, arrange four copies in a 2×2 block on a larger canvas, and look for seams, lines, or sudden color shifts.
- Export the tile and bring it into your compositing or 3D tool, where a tiling effect or texture repeat makes problems obvious.
- Zoom out and squint. Repetition artifacts, such as a conspicuous diagonal line, show up when you see the pattern at a distance.
Common problems and fixes:
- A faint line at the seam. Usually caused by soft brush edges or antialiasing at the canvas boundary. Extend artwork slightly past the edge, or paint seam areas with a hard brush.
- Visible repetition. Add variation inside the tile, or make the tile larger with more motifs so the repeat is less obvious.
- Mismatched colors across edges. Use flat fills where the edge crosses color areas, or sample colors rather than eyeballing them.
- Distorted shapes after resizing. Always scale uniformly, and avoid free transform on only one axis.
Step 6: Export for motion and 3D work
Export the tile as a lossless image format if you need clean edges and transparency. Keep a layered working file as well, so you can change colors or motifs without redrawing.
Once the tile is out of Procreate, a few paths open up for motion designers:
- After Effects: Place the tile on a layer and tile it to fill the composition, then animate the offset for scrolling backgrounds.
- Cinema 4D and Blender: Use the tile as a repeating texture, then animate its scale or offset for subtle movement.
- Nuke: Bring the tile in as an image and tile it in your comp.
Keep the tile at a size larger than you think you need. You can always scale down in the compositor, and you can't recover detail you didn't paint.
Taking a finished tessellation into motion with Styleframe
A static tessellation is the starting point for many motion pieces: title backgrounds, transitions, textured environments. Styleframe is one tool you could consider once your tile exists. It isn't a replacement for the drawing process above.
Whichever tool you use, work from your own reference frames where you can, so the animation stays anchored to a tessellation you've already made geometrically correct.
A practical workflow, start to finish
- Sketch the motif and decide on the tiling type: simple offset, Escher-style edge modification, or symmetry-based.
- Set up a square canvas with a grid and, if available, snapping.
- Build the tile with the offset method, shifting by half the canvas in each direction and filling the gaps.
- Test with a 2×2 arrangement and fix any seams.
- Export a high-resolution tile and keep the layered file.
- Bring it into After Effects, Cinema 4D, Blender, or Nuke for tiling and animation.
- If you need generated motion, style transfer, or 3D-style views of the artwork, consider tools such as Styleframe, then bring the results back into your compositor.
Quick answers
Do I need a special brush? No. A hard-edged brush makes seam checking easier, but any brush works if you review the edges.
Why does my tile show a line when repeated? Usually a soft edge, a mismatch between opposite sides, or a canvas size that doesn't divide evenly. Recheck the offset and use hard edges near the boundary.
Can I make non-square tessellations? Yes. Hexagonal and triangular patterns work, but they need careful grid setup and precise duplication. Start with squares until the edge-matching logic feels natural.
Is symmetry enough? Not by itself. It's excellent for generating ideas, but you still need to verify that opposite edges match.
Learn the offset method first, check every tile in a repeated layout, and export larger than you think necessary. After that, the creative decisions about motif, color, and motion are yours, and the technical side stops getting in your way.