How to Do Perspective in Procreate
StyleFrame Team8 min read
To do perspective in Procreate, open Actions (wrench) → Canvas, switch on Drawing Guide, tap Edit Drawing Guide, and choose Perspective. Tap the canvas to add one, two, or three vanishing points, drag them to set your horizon, and tap Done. Then turn on Drawing Assist in a layer's options so your strokes snap to the guide lines.
Step-by-step: set up a perspective guide in Procreate
- Tap Actions (the wrench icon) and open the Canvas tab.
- Toggle Drawing Guide on.
- Tap Edit Drawing Guide. This opens the Drawing Guides screen.
- Tap Perspective at the bottom of the screen.
- Tap the canvas to place your first vanishing point. Tap again for a second, and again for a third.
- Drag the nodes to position the points and rotate the horizon line.
- Adjust the guide's color, thickness, and opacity so it's visible but not distracting.
- Tap Done to commit, or Cancel to discard the changes.
On the Pocket version for iPhone, the path is slightly different. You expand the top toolbar with the ellipsis, go to Actions → Canvas, and then choose Edit Drawing Guide. Swiping up on the grey handle at the bottom expands the extra settings.
The guide is only an overlay. To make your brush follow it, select a layer, open its options, and turn on Drawing Assist. Without this step, the lines are just visual reference and your strokes stay freehand.
Choose between one-, two-, and three-point perspective
The number of vanishing points you place decides which kind of perspective you get. Pick based on where the camera sits relative to your subject. This is the same decision you make when you place a virtual camera in Cinema 4D or Blender.
One-point perspective
Place one vanishing point. Surfaces facing the viewer keep their true shape, with horizontals and verticals parallel to the canvas edges. Only the lines running toward or away from the viewer converge on the point. This suits corridors, roads, interiors seen straight on, and symmetrical, centered title-card compositions.
Two-point perspective
Place two points on the horizon. Verticals stay parallel, while horizontals converge toward the left or right point depending on which face they belong to. This is the natural choice for buildings, props, and products viewed at a corner angle. It reads as more realistic than one-point.
Three-point perspective
Place three points. Verticals now converge too, which gives the strongest sense of height or looming scale. Use it for low-angle hero shots of towers, high-angle drops, and dramatic establishing frames.
A practical tip: vanishing points don't need to sit on the canvas. Pushing them off-canvas often looks more natural, because it reduces the extreme foreshortening you get when points are close together. In a wide format like 16:9, off-canvas points are usually the right default.
Fine-tune the guide
Once the points are placed, a few adjustments make the guide easier to work with.
- Position and rotation: Drag the blue nodes and the horizon line to set the exact angle of the grid. On the Pocket version, drag just outside the circle around a vanishing point.
- Horizon behavior: With a single point, you can rotate the horizon line yourself. Once you add a second point, the horizon is defined by where the two points sit. That is useful for dutch angles, since tilting the points tilts the horizon.
- Per-point color: Tap a vanishing point and choose Select to change that point's line color. With two or three points active, giving each a distinct color tells you at a glance which set of lines you're following.
- Thickness and opacity: Lower these once you're comfortable. A dense grid at full opacity gets in the way when you start refining shapes.
- Delete a point: Tap it and choose Delete.
Draw with Drawing Assist
Drawing Assist is what turns the guide from a visual aid into a drafting tool. With it on, each stroke is adjusted to follow the direction of the guide lines, so you get clean, straight lines that converge correctly.
A few habits make this faster:
- Assign Drawing Assist to a QuickMenu slot. Drawing Assist is a per-layer setting, and it stays on until you switch it off. If you want to alternate between snapped lines and freehand strokes, a QuickMenu shortcut saves you from reopening layer options each time.
- Combine it with QuickShape. Used together, they let you build accurate boxes and volumes quickly.
- Start lines at the canvas edges and work inward. This tends to give cleaner results when the guide is dense.
- Keep a separate layer for construction lines. Put Drawing Assist on that layer, lower its opacity later, and sketch the loose final drawing on a new layer above it.
A reliable workflow for drawing an object or scene
This process works for a prop, a set piece, or a whole environment.
1. Start with a box. Block the overall form as a simple cuboid. For a two-point object, draw the nearest vertical edge first. Then follow the left point for the left face and the right point for the right face. Choose the depth of the form once and keep it consistent, because that first measurement controls the rest.
2. Keep verticals vertical. In one- and two-point perspective, verticals shouldn't lean. Holding one finger on the canvas while you draw a line is a quick way to lock a perfectly vertical stroke.
3. Put details on the right planes. Anything that sits on a face follows that face's vanishing direction. Handles, windows, panels, and signage all inherit the perspective of the surface they belong to.
4. Find true centers. To center a feature on a face, draw light diagonals from corner to corner. Then run a line from the intersection to the correct vanishing point. This corrects the drift that comes from eyeballing positions on foreshortened planes.
5. Reduce the construction layer. Lower the opacity of your perspective lines, create a new layer, and draw the final linework freehand. You'll keep the structure while avoiding a sterile, ruler-drawn look.
6. Use a reference photo when it helps. If you're building an environment, such as a street, find a photo with strong converging lines. Trace the key structural lines (road edges, rooflines, window rows) on a construction layer, then sketch freehand on top. You don't need to trace everything, only enough to anchor the space.
Perspective is more than vanishing points
The guide handles linear perspective. Believable depth usually combines several cues:
- Scale: Objects get smaller as they move away.
- Overlap: Closer elements cover farther ones. Without this, shapes feel like paper cutouts.
- Tonal value: Distant elements get lighter and less saturated.
- Atmospheric perspective: Haze between the viewer and distant forms lowers contrast and washes out color.
For motion work, these cues also map onto layer structure. Foreground, midground, and background separations in your Procreate file translate directly into parallax planes in After Effects.
Using Procreate perspective in a motion pipeline
Procreate's perspective tools are most useful early in a project, when you're working out the camera and the space. Typical uses for motion designers and VFX artists include:
- Storyboards and animatics: Setting a horizon and vanishing points for each shot quickly communicates lens height and camera angle.
- Style frames and concept art: Using accurate perspective makes a still easier to rebuild as 3D, or to use as a matte painting base.
- Set and prop design: A two-point sketch of a prop is a fast way to define its proportions before modeling in Cinema 4D or Blender.
- Camera-match references: Drawing the guide over a plate helps you check where the horizon and vanishing points fall before you commit to a layout.
One limitation to keep in mind: Procreate's guide is a 2D drafting aid, not a camera solve. It won't give you lens data or a 3D scene. If a shot has to match a real plate or a 3D render exactly, treat the sketch as a design reference and use proper tracking and a 3D camera downstream.
Common perspective mistakes to avoid
- Vanishing points too close together. This gives a distorted, fisheye-like look. Move them apart or off-canvas.
- Forgetting to enable Drawing Assist. If your lines aren't snapping, check the layer options first.
- Leaving Drawing Assist on when you want freehand. The reverse mistake is just as common. A QuickMenu toggle fixes it.
- Mixing perspective systems in one scene. If the room is two-point, the furniture in it should use the same points.
- Drawing circles as perfect circles on angled surfaces. They become ellipses. The more the surface turns away, the narrower the ellipse.
- Over-relying on the grid. Use it to build structure, then loosen up on a separate layer so the drawing still has character.
Quick answers
How many vanishing points can Procreate's perspective guide have? Up to three, which gives one-, two-, or three-point perspective.
Can I place vanishing points off the canvas? Yes. You can drag them on or beyond the canvas edge, and off-canvas placement often reads more naturally.
Why aren't my lines following the guide? Drawing Assist is probably off. Turn it on from the layer's options for the layer you're drawing on.
Can I change the guide's look? Yes. Color, thickness, and opacity are all adjustable, and on the Pocket version they can be set per vanishing point.
Does Procreate's perspective guide work as a 3D camera? No. It's a 2D drafting aid. For camera-accurate work, use your 3D application or tracking tools and treat the sketch as a design reference.