How to Do Neon on Procreate
StyleFrame Team9 min read
To make neon in Procreate, draw your shape with a monoline brush in a bright, saturated color on a dark canvas, then add a thinner white line down the center on a layer above it. Next, duplicate those layers, blur the copies with Gaussian Blur, and set them to the Add blend mode so the glow stacks into a hot core with a soft halo. For a faster version, apply Adjustments > Bloom to the colored layer and tune it by eye. Both methods work, and the layered blur gives you more control.
What You Need Before You Start
- Procreate on an iPad, ideally with an Apple Pencil
- A monoline brush, since real neon tubing has a constant width
- A palette of bright, saturated colors. Hot pink, cyan, electric green, and orange read best. Muted colors turn muddy when glow is added.
- A dark background. A flat black canvas works, and a brick wall or concrete photo adds context.
Set the canvas size for your final use before you draw. Blur radii depend on resolution, and changing size later means redoing the glow. If the piece will end up in a video timeline, start at 3840 × 2160 or at your comp's resolution, as long as your iPad's memory can handle the layer count.
Method 1: Layered Gaussian Blur (Most Control)
This is the method to use when the result needs to hold up on a big screen.
Step 1: Draw the base shape in white
Fill the background layer with black. On a new layer, draw your lettering, logo, or shape in white with the monoline brush. Keep strokes clean and consistent. If you're lettering, keep the forms simple, because bent glass tubes can't make tight, spiky details.
Step 2: Duplicate the layer for each glow stage
Duplicate the white layer so you have four copies. Name them from bottom to top:
- Shadow (optional, for depth)
- Wide glow
- Tight glow
- Core
Naming layers early keeps the file manageable once you add effects and groups.
Step 3: Colorize with Alpha Lock
Turn on Alpha Lock for the colored layers (two-finger swipe right on the layer, or choose it from the layer menu). Pick your neon color and fill the layer. Alpha Lock keeps the paint inside the existing shape, so you won't spill past the edges. Color the wide glow and tight glow layers. Leave the core layer white, or tint it a very pale version of your color. A white core with a colored body is what sells the look of a hot tube.
Step 4: Blur the glow layers
Go to Adjustments > Gaussian Blur, choose Layer, and slide across the canvas.
- Wide glow: a large blur, enough to spread the color well beyond the stroke.
- Tight glow: a smaller blur, so the color hugs the stroke and brightens its edges.
- Core: a very light blur or none. A slightly softened white core looks more luminous than a razor-sharp one.
Blur amounts depend on stroke width and canvas resolution, so there's no universal number. Judge by eye. The wide glow should look like a wash of color, and the core should still read as a distinct line.
Step 5: Switch blend modes to Add
Set the glow layers' blend mode to Add. Over a dark background this makes overlapping light accumulate toward white instead of just covering what's underneath, much as light behaves in a real scene. Adjust each layer's opacity until the halo doesn't overwhelm the shape. If the color blows out into white, lower the opacity on the tight glow first.
Group the layers when you're happy with the result. A group lets you move, scale, or duplicate the whole sign as one object.
Method 2: Bloom (Fastest Route)
Procreate's Bloom adjustment builds a glow in a single pass.
- Fill the canvas with black and draw your shape in a bright color with a monoline brush.
- Duplicate the layer. On the duplicate, push brightness up until it reads close to white. This will be the hot core.
- Select the colored layer, open Adjustments > Bloom, and drag across the canvas to preview it. Experiment with the three controls at the bottom of the screen to get the look you want.
- Duplicate the colored layer once more, set it to Add, and lower its opacity to reinforce the halo.
- Group everything.
Bloom is quick and works well for social posts, doodles, and concept sketches. Its drawback is that you can't separately tune the wide and tight glow, so the layered blur still wins for finished work.
Making It Look Like Physical Neon
A glow on a line can still look like a glowing line instead of a neon sign. Several details close that gap:
- Break the strokes where tubes would cross. Glass tubes don't overlap, so interrupt a line wherever it would pass over another.
- Add bends. At sharp corners, erase a small section of the white core on one side of the fold so the tube appears to pass behind itself.
- Paint contact shadows. On a separate layer, add small dark shapes where tubes meet or cross. Use black, reduce the opacity, and try a duplicate set to Soft Light to make them feel less pasted on.
- Add mounting hardware. Small dark clips or a thin backing frame make the sign feel physical.
- Cast light on the wall. Paint a soft colored wash on the background layer behind the sign using a large airbrush in Add or Screen mode. This is the single biggest realism boost.
Building the Background
A neon sign needs something to glow against. A simple setup:
- Import a brick or concrete photo via Actions > Add > Insert a File.
- Reduce its saturation and brightness in Adjustments > Hue, Saturation, Brightness.
- Add a new layer filled with black, then erase the center with a large soft brush to create a vignette. Lower the layer's opacity slightly so some texture survives.
- Place the neon group above it and fine-tune its glow opacity against the texture.
Keep the background dark and desaturated. If the wall is bright, the neon will look washed out because Add-mode glows have little room to brighten.
Common Problems and Fixes
The glow looks flat. You probably have only one blurred layer. Use at least two glow radii plus a core.
Colors turn muddy or gray. The base color wasn't saturated enough, or the background isn't dark enough. Boost saturation and darken the surroundings.
The core clips to pure white and the color disappears. Reduce the opacity of the tight glow, or tint the core a pale version of your hue.
Banding in the glow. Large gradients on dark backgrounds can show steps. Add a subtle grain or noise layer over the final image to break them up.
Edges look jagged after export. Work at a higher resolution than you need, and export at the final size rather than upscaling a small file.
Taking a Procreate Neon Design Into a Motion Pipeline
Procreate gives you a still, but motion work usually needs layers. Export as a layered PSD or as separate PNGs with transparent backgrounds, with the core, tight glow, and wide glow kept apart.
In After Effects, you have two reasonable options:
- Use the painted glow layers as is. Import the PSD as a composition, keep the layer structure, and set the glow layers to Add. Animate opacity on each one independently to create flicker or a power-on sequence.
- Rebuild the glow procedurally. Bring in only the white or colored line art, then build the glow in After Effects with Fast Box Blur or Gaussian Blur duplicates, or the Glow effect, so you can animate the shape and have the light respond automatically. This is better when the sign needs to move or be redrawn per frame.
For flicker, a simple wiggle expression on opacity, such as wiggle(8, 30) clamped to a sensible range, gives you an irregular buzz. Stepping opacity with a few hand-set keyframes often looks more believable for a failing tube. Pair that with a faint matching color on the surrounding environment so the light feels like it's affecting the scene.
Where Styleframe Fits
Procreate is excellent for designing a single neon frame, but animating that look across many frames, or applying it to existing footage, is another job. Styleframe is an AI video and motion tool built for professional artistic control, and it can pick up where your Procreate design leaves off.
You could use your finished neon frame as a style reference for Restyle, which does reference-driven style transfer. That lets you carry the same tube-and-glow treatment onto other frames or clips instead of repainting each one. If you want a neon sign to animate between two states, such as off to on, or one logo to another, Frames-to-Video generates motion between keyframes you define. Other tools in the set include Ink-and-Paint, 2D-to-3D, Turntable for rotating a design, Remove Background, and 4K Upscale.
The emphasis is control rather than a one-click black box. Generations are driven by your reference images, video clips, and keyframes, iteration is non-destructive, and output is production-ready 4K. Results still need your judgment, so expect to review and refine them like any other shot.
It also fits existing pipelines. Styleframe exports image sequences, so you can bring the output into After Effects or Nuke and finish the glow, grade, and composite there. Your compositing workflow stays intact, with Procreate for design and Styleframe for generating or restyling motion.
Quick Recap
- Start with a dark canvas and a monoline brush.
- Draw in white, then duplicate into core, tight glow, and wide glow layers.
- Colorize the glow layers with Alpha Lock, blur them at different radii, and set them to Add.
- Use Bloom when speed matters more than control.
- Break tubes where they cross, add shadows, mounting details, and cast light to sell the physicality.
- Export layers separately for After Effects, where you can animate flicker or rebuild the glow procedurally.
With layered blur, Add blending, and a dark backdrop, you can get a convincing neon look in Procreate within a few minutes, and the layered file carries over cleanly into a motion workflow.