How to Do Multiply Blending Later Procreate
StyleFrame Team7 min read
To use Multiply in Procreate, open the Layers panel, tap the letter N on the right side of the layer you want to change, tap the blend mode name, and pick Multiply. Then drag the Opacity slider until the darkening is as strong as you want. Multiply multiplies the base color by the blend color, so the result is always darker or equal, and white on the layer leaves the artwork underneath unchanged. That makes it the standard mode for shadows, tinted glazes, and texture overlays.
Step-by-step: applying Multiply to a layer in Procreate
The process is the same on any recent version of Procreate. The layer must sit above the artwork you want to darken, because blend modes only affect layers beneath them.
- Create or select the layer. Add a new layer above your base color or line art. For shadows, a dedicated layer keeps the effect editable.
- Open the Layers panel. Tap the double-rectangle icon in the top right of the interface.
- Tap the "N" next to the layer. The letter shows the active blend mode. N means Normal, the default.
- Tap the mode name. A scrolling list opens, and each mode previews on your layer as you scroll.
- Select Multiply. Tap outside the list to close it.
- Adjust Opacity. Use the slider in the same menu. As a shortcut, two-finger-tap the layer and slide left or right on the canvas.
Once Multiply is active, any paint you add to that layer darkens what's underneath rather than covering it. If you don't like the result, switch back to Normal. Nothing about the layer's pixels has changed, which is why blend modes are a non-destructive way to experiment.
One detail that trips people up
The Opacity slider in the blend menu changes the opacity of the entire layer and ignores any active selection. If you want to soften only part of a layer, work with a selection and the layer's content directly, or split the elements onto separate layers.
What Multiply actually does
Multiply takes each pixel's brightness on your layer and multiplies it with the pixel below it. Think of values between 0 (black) and 1 (white):
- White (1) on the Multiply layer multiplies the base by 1, so nothing changes.
- Black (0) multiplies the base by 0, so the result is black.
- Mid-tones darken the base proportionally. A 50% gray roughly halves the brightness.
- Colors tint as well as darken. A saturated blue on a Multiply layer pulls the base toward blue and removes red and green in proportion.
Multiply is the digital equivalent of stacking two transparent filters, and it can only ever make an image darker.
Because of that, Multiply behaves best over mid-to-light base colors. On an already dark base, the effect is subtle. On a pure black area, it does nothing visible.
Practical uses for a Multiply layer
Shadows and ambient occlusion
The most common use is painting shadows. Pick a desaturated, cool or warm tint rather than pure black, and paint on a Multiply layer above your flat colors. Because the shadow color multiplies with whatever lies beneath, it automatically picks up the hue of each surface instead of producing a gray smear. A purple-leaning shadow over a skin tone and a green wall will each look different, which is what you want.
Color glazes and tonal unification
A flat wash of a single color on Multiply can pull an entire illustration toward a palette. Lower the opacity to 20–40% and the effect reads as a gentle grade rather than a filter. This works well for matching illustrated elements to a shared mood before they go into a motion piece.
Texture and paper overlays
Scanned paper, grain, or hand-painted textures set to Multiply let the light areas of the texture disappear and keep the darker marks. It's a quick way to make digital artwork feel printed or hand-made.
Inking and line work
If your line art is on a white-backed layer, setting it to Multiply drops the white out and keeps the lines, so you can place it over color without cutting out the background.
Making Multiply cleaner: clipping masks and layer structure
Painting a shadow that spills over the edge of a character is the most common Multiply mistake. A few habits help:
- Use a clipping mask. Place the Multiply layer directly above the base shape and clip it. The shading is then constrained to the shape underneath, so you can paint loosely without erasing afterward.
- Keep one purpose per layer. Separate layers for cast shadows, form shadows, and color glazes make it easy to change one without redoing the others.
- Name layers. If the file is heading into a motion pipeline, someone (possibly you in two weeks) will thank you.
- Avoid pure black. It flattens the result. Slightly saturated dark tones keep depth.
Multiply versus related darkening modes
If Multiply isn't giving the look you want, the neighboring modes in the same list behave differently:
- Darken keeps the darker of the base and blend colors rather than combining them. It doesn't blend pixels, so it's less smooth.
- Color Burn increases contrast and mid-tone saturation, and usually gives a darker result than Multiply. Useful for dramatic shadows, but it can get harsh.
- Linear Burn is darker than Multiply but less saturated than Color Burn, and it adds contrast in the darker tones.
- Darker Color looks at the combined color rather than each RGB channel separately.
A reasonable workflow is to start with Multiply, since it's the most predictable, and only move to Color Burn or Linear Burn when you need more punch.
Troubleshooting: why Multiply isn't working
Nothing changes. The layer is probably below the artwork, or you're painting with white (which has no effect under Multiply). Check the layer order and the color you're using.
The result is too dark or muddy. Reduce opacity, choose a lighter or less saturated paint color, or lighten the shadow color rather than relying only on the slider.
The effect disappears over dark areas. That's how the math works. If you need to shade a dark area, consider Color Burn, or paint a lighter base before shading.
Edges look wrong after export. Flattened PNGs bake in the blend, but if the Multiply layer is supposed to stay live, export in a layered format instead (see below).
Taking a Multiply layer from Procreate into After Effects
Procreate is often where the illustration starts for motion work: character art, textures, backgrounds, and hand-painted elements. The question then becomes how to preserve your Multiply setup.
Export a layered file. Check Procreate's export options for a format that keeps layers, such as PSD. Import it into After Effects as a composition (retain layer sizes) and check that each layer's blend mode carried through. If not, set the Multiply mode manually in the timeline's Modes column.
Or export flattened pieces. If you only need the finished look, export a PNG per element. This is simpler but removes your ability to adjust shadows later.
Mind the color math. Color settings in your compositing app can change how Multiply looks compared to what you saw on the iPad. Match your project's color settings to your goals, and compare against the Procreate original. A Multiply that looks perfect in Procreate may need small opacity tweaks once it's in a different pipeline.
Consider keeping shadows separate. Leaving the Multiply layer as its own element lets you animate it, parent it, or change its opacity over time. That's a real advantage over baked art.
Where Styleframe fits for motion artists
If you're painting in Procreate to build visuals for animation, Styleframe is useful downstream of the painting step, not in place of it. It's an AI video and motion tool built around artistic control: you drive generations with your own reference images, video clips, and keyframes rather than a text prompt alone.
In practice, a Procreate illustration with proper Multiply shading can serve as reference artwork, so your hand-painted shading language can carry across a whole sequence.
The point is that you keep your existing pipeline and use your own artwork to steer the result.
Quick reference
- Where: Layers panel → tap N → choose Multiply.
- Strength: the Opacity slider in the same menu, or a two-finger tap on the layer.
- Best for: shadows, glazes, textures, and dropping white from line art.
- Won't do: lighten anything; white has no effect and black stays black.
- Cleaner results: use clipping masks, tinted shadow colors, and one purpose per layer.
- Into motion: export a layered file, verify blend modes in After Effects, and check color settings.
Multiply is simple to apply, but the quality comes from the choices around it: the color you paint with, how the layers are organized, and whether the effect stays editable when the file moves into your animation pipeline.