How to Do More Than Two Layers on Procreate
StyleFrame Team8 min read
If you can only see two layers in Procreate, you can add more by tapping the + icon at the top of the Layers panel. Each tap creates a new layer above the active one. The number of layers you can have is not fixed. It depends on your canvas size and your iPad's memory, so large, high-DPI canvases hit the ceiling sooner than small ones. If the + stops working, reduce the canvas size or merge layers you no longer need to edit separately.
Add More Layers in Procreate
- Open your canvas and tap the Layers icon (two overlapping squares) in the top right.
- Tap the + at the top of the panel. A new, empty layer appears above whichever layer is currently active.
- Tap the new layer once to make it the active layer. It highlights in bright blue.
- Draw or paint. Everything you do lands on that active layer only.
Repeat as often as you need. New layers are named sequentially (Layer 1, Layer 2, Layer 3, and so on). Tap an active layer a second time to open the Layer Options menu, where you can rename it, select its contents, copy it, fill it, or clear it. Renaming matters more than it seems. Once you pass five or six layers, "Layer 9" tells you nothing, and the habit of naming layers pays off again when you export to a compositing app.
Duplicate instead of starting from scratch
If you want a second or third version of existing artwork, swipe left on a layer and tap Duplicate. This is the fastest way to build variations: a clean line layer, a color layer, a shading layer, a texture layer. Each can have its own opacity and blend mode, and you can change one without touching the others.
Why You Might Not Be Able to Add More Layers
If the + is unresponsive, or you suddenly can't create more layers, the cause is often memory. The maximum layer count generally depends on:
- Canvas dimensions. Larger canvases generally leave room for fewer layers than smaller ones.
- DPI. Higher DPI at the same physical size means more pixels.
- Your device. Different iPads can support different layer counts on the same canvas.
To check where you stand, open Actions > Canvas > Canvas Information and look at the Dimensions section, which shows the maximum number of layers for the current canvas. If you need more headroom, you have three realistic options:
- Merge layers you've finished with. Pinch two layers together with two fingers, or open Layer Options and choose Merge Down, to combine them.
- Group layers to keep the panel manageable (this helps organization).
- Start a new, smaller canvas and paste your artwork across, or rebuild the project at a lower resolution for sketching and upscale later.
Planning the canvas before you start is cheaper than fixing it mid-project. If you know you need 30+ layers, pick the canvas size with that in mind rather than the largest size your device allows.
Work With Many Layers Without Losing Control
Adding layers is easy. Managing a stack of 20 is where people lose time. These features, all in the Layers panel, make it manageable.
Select multiple layers
Tap a layer to make it your Primary layer. Then swipe right on other layers to add them as Secondary layers, which show in darker blue. You can only have one Primary layer, but as many Secondary layers as you like. Two details are worth knowing:
- Drawing and painting only affect the Primary layer, even with several layers selected.
- Selection and Transform actions apply to all selected layers, but Adjustments don't work with multiple layers selected, and Cut and Copy apply only to the Primary layer.
Once you have Secondary layers selected, Delete and Group options appear at the top of the panel, acting on the whole selection.
Group related layers
Select the layers you want, tap Group, and name the group something meaningful ("Character," "Background," "FX"). Collapsing groups gives you back screen space. Think of groups the way you'd think of pre-comps or folders: they exist so you can find things quickly.
Use Layer Select to find the right layer on the canvas
Scrolling a long panel to find the layer you want is slow. Turn on Layer Select under Actions > Prefs > Gesture Controls > Layer Select and assign a touch or Apple Pencil gesture to it. When you trigger it, touching the canvas highlights the layers beneath your finger or Pencil. Lift to select one, and if several layers overlap at that point, a pop-up lists them. On Apple Pencil Pro you can assign it to squeeze, though squeeze can only be bound to one gesture at a time.
Use Alpha Lock and clipping masks for non-destructive detail
Rather than adding a new layer for everything, use Alpha Lock (in Layer Options) to restrict painting to existing pixels on a layer. It's useful for shading or texture on a shape without painting outside it. Fill Layer with Alpha Lock on will recolor only the existing artwork and leave transparent areas alone. For shading you want to keep separate and editable, a clipping mask on a layer above does the same job without altering the base layer.
Don't forget Clear and Fill
Clear empties a layer without resetting its name, blend mode, or opacity, which is handy when you want to redo a pass while keeping the layer's setup. Fill Layer floods the whole layer with the current color, overriding everything on it, so use it deliberately.
A Practical Layer Structure for Motion Work
If your Procreate artwork is headed into animation or compositing, structure the layers as you'd want them to arrive in After Effects. A reasonable baseline:
- Separate by movement. Anything that will move independently (a limb, an eye, a cloud, a logo element) gets its own layer.
- Keep line, color, and shading apart if you'll need to change them later. Merging too early is the most common regret.
- Paint under and over where elements will separate. If a character's arm will swing, paint the part of the torso hidden behind it.
- Name everything and group by asset.
- Keep a flat reference layer at the bottom or in a hidden group so you can compare against the original composition.
When you're done, export from Actions > Share. Choosing PSD keeps your layers, so the file opens in After Effects (and Photoshop) with layer separation intact. In After Effects, import the PSD as a composition and your Procreate layers become individual layers you can parent, animate, and apply effects to. Procreate also offers flattened formats like PNG and JPEG, plus animation export options if you used Animation Assist.
One caution: check your blend modes after import. Not every Procreate blend mode or layer behavior translates identically, so test a few layers early rather than discovering differences at the end.
Where Styleframe Fits After Your Procreate Layers
Procreate is where many artists draw keyframes, backgrounds, and style references. Styleframe is an AI video and motion tool built for professional artistic control, and it can pick up from there without replacing your compositing setup. Because every generation is driven by reference images, video clips, and keyframes, the artwork you made in Procreate becomes the direction rather than a rough prompt.
A few practical ways the two combine:
- Keyframes to motion. Export two or more of your Procreate frames and use them as keyframes in Frames-to-Video, so you control where the shot starts and ends instead of relying on a one-click black box.
- Style transfer from your own art. Use a painted frame as a reference for Restyle or Ink-and-Paint, which are reference-driven style transfer tools, to carry your look across footage or other frames.
- 2D to 3D and turntables. If you've drawn a character or prop, 2D-to-3D and Turntable can help you explore it from other angles. Remove Background can isolate subjects for compositing.
- Delivery quality. 4K Upscale takes output to production-ready 4K, and iteration is non-destructive, so you can try variations without overwriting earlier versions.
Styleframe exports image sequences and works alongside After Effects and Nuke, so the compositing stage stays where it is. Your layered Procreate PSD, your generated sequences, and your CG renders from Cinema 4D or Blender can all come together in the same comp.
Troubleshooting Common Layer Problems
"I added a layer but nothing happens when I draw." Check which layer is active (bright blue). Painting only affects the Primary layer, and the new layer might be hidden or locked, or you might have a different layer selected.
"I can't use Adjustments on my layers." Adjustments don't work with multiple layers selected. Deselect the Secondary layers by swiping right on them again, or tap a single layer.
"My layers disappeared into a group." Open the group by tapping its arrow. If you want to pull a layer out, drag it above or below the group.
"I can't add any more layers." Check Canvas Information for your maximum layer count, merge finished layers, or move to a smaller canvas.
"Copying a layer only copies part of what I selected." Cut and Copy only apply to the Primary layer. Group the layers first, or duplicate each one separately.
"I want to move everything at once." Select the layers (Primary plus Secondary), then use the Transform tool. The Layer Options "Select" command is meant for selecting pixels, not for moving all layer content, so it's the wrong tool for this job.
Quick Summary
- Tap + in the Layers panel to add a layer; Duplicate to copy existing ones.
- The layer limit depends on canvas size, DPI, and your iPad's memory. Check Canvas Information.
- Swipe right to add Secondary layers, then Group, Delete, or Transform them together.
- Rename layers, group by asset, and keep line, color, and shading separate if you'll animate later.
- Export as PSD to bring layers into After Effects, and use Procreate frames as keyframes and references in Styleframe when you want controlled AI motion that still finishes in your usual compositing pipeline.