How to Do Makeup on Procreate
StyleFrame Team8 min read
To do makeup in Procreate, put each product on its own layer above a photo or portrait, then build the look from light to dark with soft, textured brushes: base and contour, blush, highlight, eyes, brows and lashes, lips. Clip or blend each layer with Multiply, Overlay, or Soft Light, and keep opacity low so you can stack the color gradually. Working this way keeps every change reversible, so you can adjust one product without repainting the face.
What You Need Before You Start
- An iPad that runs Procreate and an Apple Pencil (or a compatible stylus). Pressure sensitivity matters because stroke pressure controls how much pigment you lay down.
- A face to work on: a drawn portrait, a character illustration, or a photo of a model with little to no existing makeup. A neutral starting point makes your colors read more accurately.
- A brush set. Procreate's built-in Gouache brushes work for blending and shading. Dedicated makeup brush packs add soft, powdery, or satin textures designed to mimic skin, eyeshadow, and gloss.
- A palette. Pick skin tones directly from your image, then build a small palette of shades a few steps darker and lighter, plus your accent colors.
Step 1: Set Up the Canvas and Layer Structure
Import your photo or open your portrait, then lock or leave the base image untouched. Everything you paint goes above it.
Think of the layer stack the way a makeup routine runs, from the foundation up:
- Skin / base: optional tone correction or foundation
- Contour and shading
- Blush
- Highlight
- Eyeshadow (one to three layers)
- Liner, lashes, and brows
- Lips
- Accents: glitter, rhinestones, freckles
Name each layer. It feels like overhead until you want to lower only the blush opacity at the end, and then it saves real time. Group related layers (Eyes, Lips, Base) so you can toggle them on and off to compare before and after.
For clean edges, use a Clipping Mask on layers that should stay inside the skin or lip shape. If your portrait is a flat illustration, clip your shading layers to the skin layer so nothing spills outside the silhouette.
Step 2: Base, Contour, and Shading
Create a new layer, set its blend mode to Multiply, and pick a color a couple of shades darker than the skin, ideally with a warm tint such as a muted magenta or brown. Warm shadows look more like real skin than gray ones.
Paint contour where a face naturally falls into shadow:
- Under the cheekbones, stroking diagonally toward the ear
- Along the temples and hairline
- On the sides of the nose and where the nose bridge meets the brow bone
- Along the jawline and under the chin
Start with a larger brush at low opacity, then shrink the brush for the nose and brow area. Press lightly and layer up. In digital work you can always darken, and undo is cheap, but a heavy first pass is harder to blend out than a faint one.
Blend with a textured brush, not a pure soft airbrush. A perfectly smooth gradient is what makes digital makeup look like a phone filter. Using the same brush for painting and blending also helps keep the texture consistent.
Step 3: Blush and Highlight
Blush: On a new layer, choose a pink, peach, or coral from your palette. Apply it on the apples of the cheeks and sweep it up toward the temples for a lifted look, or keep it lower for a softer, rounder one. Set the layer to Normal, Multiply, or Soft Light depending on how saturated you want it, and drop the opacity until it looks like it's coming from within the skin.
Highlight: Use a light, slightly warm shade on its own layer, and place it where light would hit:
- Top of the cheekbones
- Bridge and tip of the nose
- Cupid's bow
- Center of the chin
- Inner corners of the eyes and the brow arch
Vary your brush size. Large strokes cover cheeks and forehead; very small dabs handle the nose tip and lip bow. Overlay or Soft Light modes give a glow, while Normal at low opacity gives a more matte sheen. Match the highlight to your light source. If the light comes from the upper left, the highlight shouldn't be symmetrical.
Step 4: Eyes
Eyes carry most of the look, so give them several layers.
- Base shadow: Use a soft, textured brush in a neutral or tonal shade across the lid, just under the crease. Work in small circular motions and follow the eye's natural shape.
- Depth: On a second layer, add a darker shade to the outer corner and crease, blended inward.
- Shimmer or accent: On a third layer, add a lighter color or glitter to the center of the lid or the inner corner. Try Overlay for sparkle.
- Liner: Use a small, firm brush so wings and lines come out smooth. Draw from the inner corner outward in a few confident strokes rather than one long wobbly one.
- Lashes: Paint individual lash strokes with a thin brush, curved outward. Zoom in for control, then zoom out regularly to check that the lashes read at normal size.
If you want matching eyes, turn on Drawing Assist with vertical symmetry. It works well for stylized face charts and stylized characters. Turn it off for details that depend on light direction, like reflections in the eyes, or for photos where the face isn't perfectly symmetrical.
Step 5: Brows and Lips
Brows: Use short, directional strokes in a shade slightly darker than the hair or a couple of tones darker than the skin if you're sketching. Paint the thicker, softer start of the brow first, then taper toward the tail. Use a pencil-like brush for hair strokes and a soft brush to fill gaps.
Lips:
- Start with a base color on its own layer, clipped to the lips or masked.
- Add a darker shade at the outer corners and the lip line to give shape.
- Add a lighter value in the center of the lower lip for fullness.
- Finish with a small, crisp specular highlight for gloss, or skip it for a matte finish.
For a lip color that follows the photo's texture, try Multiply or Color blend modes on the base layer so the natural lip lines show through.
Step 6: Blend, Review, and Adjust
Once the main layers are in, turn groups on and off to compare. Then fix common issues:
- Looks pasted on: Lower the opacity, switch to Soft Light, or soften the edges with a textured brush.
- Muddy color: You've probably layered too many mid-tones on a single layer. Separate colors into their own layers and blend each lightly.
- Flat skin: Add a subtle skin-texture layer, or reduce overly smooth blending on the forehead and cheeks.
- Color mismatch: Use Adjustments (Hue, Saturation, Brightness, or Color Balance) on one layer instead of repainting. Because everything sits on separate layers, you can recolor an eyeshadow without affecting the blush.
Finish with a light global pass: a Curves adjustment on top, a slight grain layer, or a gentle Gaussian Blur on a duplicated layer set to Soft Light for a glow.
Using Face Templates and Face Charts
If you're designing looks rather than painting on a specific portrait, a face template or chart speeds things up. Templates typically come with pre-organized layer groups for skin, eyes, lips, and accessories, so you can drop in a color and start layering immediately. For face charts:
- Lower the outline layer's opacity and lock it.
- Add a drawing layer beneath it.
- Turn on Drawing Assist with vertical symmetry in the Canvas menu.
- Paint each look on separate layers so you can recolor later.
This approach suits makeup artists mocking up looks for clients, and it's also useful for character designers who want to test several makeup variations on a single face.
Taking a Procreate Makeup Look Into Motion
Some motion designers and VFX artists use Procreate for look development: a makeup design for a character, a beauty-shot concept, or a styleframe for a pitch. The painted still then needs to move.
This is where can fit in. It's an AI video and motion tool. You can use your finished makeup portrait as a reference for motion work, so the animation starts from a look you designed.
You keep control of color, grading, and final comp where you already work.
Common Mistakes to Avoid
- Painting everything on one layer. You lose the ability to adjust individual products.
- Using pure black for shadows. Use a darker, warmer version of the skin tone.
- Over-blending. Real makeup has texture, so leave some grain in the skin.
- Ignoring the light source. Highlights and shadows should agree with the photo.
- Skipping zoomed-out checks. Fine detail can look great at 300% and disappear, or look harsh, at normal size.
Quick Workflow Recap
- Set up a clean layer stack and name each layer.
- Contour with a warm Multiply layer.
- Add blush and highlight on separate layers.
- Build eyes in several thin passes.
- Define brows and lips.
- Blend with textured brushes, then adjust opacity and blend modes.
- Export your stills, or take them into a motion pipeline for animation.
The core habit is simple: stack thin, separate layers, keep opacity low, and adjust non-destructively. Once that workflow is second nature, you can create a new look in minutes and carry it into whatever motion or compositing tool your project needs.