How to Do Line Drawings on Procreate
StyleFrame Team9 min read
To do line drawings on Procreate, create a low-opacity sketch layer, then ink over it on a new layer with a stabilized, pressure-sensitive brush using long, confident strokes. For a fast line drawing from a photo, desaturate a duplicate of the image, duplicate that layer again, invert it, set it to Color Dodge, and raise the Gaussian Blur until the outlines appear. Either way, work on a high-resolution canvas and keep the lines on their own layer so they export cleanly into After Effects or any other compositing tool.
Set Up the Canvas Before You Draw
Most line quality problems start with the canvas. Pixelated edges, wobbly curves, and lines that fall apart when you scale them up can often be resolution issues, not skill issues.
- Resolution: Work at 300 DPI for print-bound illustration. If the drawing is headed into a motion project, match or exceed your comp size so you have room to scale in After Effects without softening the strokes.
- Gesture controls: Under Actions (wrench) > Preferences > Gesture Controls, enable Layer Select so you can hold the square button and tap the canvas with your Apple Pencil to jump to the layer you touched. Set up the Quick Menu as well. Both save time once you have a dozen layers.
- Reference: Use split screen to keep a browser or reference board beside Procreate, or bring the reference into the canvas as its own layer.
- Palm rejection: Turn it on, and consider an artist's glove if your hand drags on the glass.
Method 1: Draw Line Art by Hand
This is the approach for original illustration, character design, and anything you plan to animate frame by frame.
Build the sketch layer
Spend the sketch stage resolving problems. Gray, ambiguous areas in a rough sketch become decisions you have to make mid-inking, and those decisions slow you down and make the line work hesitant. Capture gesture and proportion in the sketch, then settle the details you can see in your reference.
Drop the sketch opacity way down
Reduce the sketch layer to somewhere around 3–15% opacity, and consider changing its color to something that contrasts with your ink. Then lock the layer so you can't accidentally draw on it.
This looks counterintuitive, but it is the difference between inking and tracing. When the sketch is barely visible, you are interpreting the drawing rather than following a path stroke by stroke, so the finished lines carry the energy of the original gesture. Use a Reference window to see the whole piece when you're zoomed in on details.
Pick a brush and tune stabilization
Create a new layer above the sketch. Choose a brush that responds to pressure so you can taper strokes and vary weight. Heavier pressure on downstrokes and shadow areas gives you the classic tapered look without extra work.
Then adjust StreamLine, which smooths and corrects your stroke. A higher setting makes long, clean curves easier, but too much will fight you on tight turns. For hair, hatching, circles, or other small curved shapes, lower it or switch to a less stabilized brush.
Draw with your shoulder, not your wrist
Aim for smooth, long strokes. Glide the pencil across the canvas in one movement rather than building a curve out of many short, stitched segments. If a stroke goes wrong, undo and redraw it rather than patching it. Stitched lines show up immediately when you scale a drawing in a comp.
Handle straight lines properly
Procreate has no dedicated line tool, and a finger or stylus tip covers the exact point where you want the line to end. Two reliable workarounds:
- Draw a line and hold at the end. Procreate snaps it into a straight line. Keep your finger on the screen to lock the angle.
- Draw the line on its own layer, then use Transform to position it exactly, so your hand is out of the way.
Separate line work from everything else
Keep ink on one layer or a small group of layers: outlines, interior detail, and accents. Put color fills beneath and shadows or texture above. That structure matters when you bring the drawing into After Effects, where you may want to recolor, wiggle, or trim the lines independently.
Method 2: Convert a Photo into a Line Drawing
Use this to generate a reference quickly, or as a base to refine with hand-inked lines. It produces an edge-style drawing rather than a clean vector-style one, so expect to tidy it up.
- Insert the photo. Actions > Add > Insert a Photo, and fit it to the canvas.
- Duplicate and desaturate. Duplicate the layer, then go to Adjustments > Hue, Saturation, Brightness and pull saturation to zero. You can nudge brightness here as well.
- Duplicate the black-and-white layer.
- Invert the top layer. Use Adjustments > Curves and flip the curve (drag the endpoints so the default "uphill" curve runs "downhill").
- Change the blend mode to Color Dodge. Tap the small letter (usually an N) on the layer thumbnail. Color Dodge is in the Lighten tab. The canvas will turn mostly white.
- Add Gaussian Blur. Go to Adjustments > Gaussian Blur and drag until the lines appear at a weight you like.
If you just see a high-contrast black-and-white photo, or the result looks tinted instead of white, recheck that the layers you duplicated were fully desaturated and that the inversion was applied to the correct layer.
An alternative: Divide
A similar result comes from the Divide blend mode. Desaturate a duplicate, duplicate it again, set the top copy to Divide, and add Gaussian Blur (a low percentage is a good starting point). Merge the two layers down, then open Curves and drag the bottom point to the right to deepen the lines. Adjust the top point slightly, but don't overdo it or the image will invert.
Make the result colorable
The output has a white background, so painting beneath it won't show. Set the merged line layer's blend mode to Multiply (Linear Burn, Color Burn, and Darker also work, with subtle differences). Now white becomes transparent in effect, and you can add a new layer underneath for color.
Turn it into something better than a filter
An auto-generated edge map is a reference, not finished line art. A cleaner workflow is to lower its opacity, add a new layer, and ink over it using Method 1 with a simplified approach. Skip the details you don't need. That produces a more graphic, intentional result than the raw conversion.
Export Line Drawings for Motion Work
Getting a drawing out of Procreate cleanly takes a few deliberate steps.
- Transparent background: Hide or delete the background color layer before exporting, and choose an export format that keeps transparency.
- Layered handoff: Export in a layered format so line, fill, and shadow layers stay separate for After Effects. Check blend modes after import, since they may not translate identically.
- Naming and sizing: Name layers before exporting and keep canvas size consistent across a sequence. Mismatched dimensions are a persistent source of cleanup work later.
Where Styleframe Fits After the Line Drawing
Procreate is where the drawing gets made. Once you have a strong line drawing, you may want to push it into motion or a different look without redrawing every frame. That's where Styleframe, an AI video and motion tool built for artistic control, can slot in as a downstream step rather than a replacement for your drawing.
Because every Styleframe generation is driven by your own references, video clips, and keyframes, your line work stays the source of truth:
- Frames-to-Video: Set your drawn poses as keyframes, and Styleframe generates the motion between them. This is useful for in-betweening, or for testing a movement before committing to a full hand-drawn pass.
- Restyle and Ink-and-Paint: Use reference-driven style transfer to carry the look of your line drawing onto footage or renders, so a 3D or live-action shot adopts your line quality and ink character.
- 2D-to-3D and Turntable: Turn a character drawing into a 3D asset and generate a rotation, which helps with model-sheet checks and camera moves around a drawn design.
- Remove Background and 4K Upscale: Isolate the artwork and bring the output to production-ready 4K.
Iteration is non-destructive, so you can try several approaches from the same references without overwriting earlier results. Output exports as image sequences, so it drops into After Effects or Nuke just like any other plate or element, and you keep your existing compositing workflow. An After Effects plugin is on the way as well.
As with any AI-assisted step, check the results against your original drawing. The aim is to extend the line work you made, not to hand the look over to a black box.
Common Mistakes to Avoid
- Tracing instead of inking. Keep the sketch faint so you interpret it rather than outline it.
- Over-stabilizing. Heavy StreamLine produces smooth curves but can flatten tight corners.
- Short, stitched strokes. They show up clearly when you scale a drawing in a comp.
- Working at too low a resolution. You can't recover edge quality later without redrawing.
- Flattening too early. Keep line, color, and texture on separate layers until you're sure you're done.
- Treating the photo filter as final art. It's a helpful base, but it needs hand refinement.
Quick Workflow Summary
- Create a high-resolution canvas and enable gesture shortcuts.
- Sketch loosely, then reduce the sketch to a faint, locked layer.
- Ink on a new layer with a pressure-sensitive, stabilized brush using long strokes.
- For photo-based lines, use the desaturate, invert, Color Dodge, and Gaussian Blur method, then refine by hand.
- Set the line layer to Multiply if you want to color underneath it.
- Export with a transparent background and with your layers kept separate.
- Bring the drawing into After Effects, or use it as a reference in Styleframe, to extend it into motion.
Strong line drawings in Procreate come down to a clean setup, deliberate strokes, and tidy layers. Get those right and the work is ready for whatever comes next in your pipeline.