How to Do Lettering in Procreate
StyleFrame Team8 min read
To do lettering in Procreate, sketch a few thumbnail layouts, build a guide layer (traced type, a drawing-guide grid, or both), then ink each letter on its own layer with a stabilized brush. Refine the shapes with Warp or Transform, then export a transparent PNG or layered PSD. Work on a large canvas with a clear layer structure, and the same lettering can go straight into an After Effects comp.
What You Need Before You Start
Procreate runs only on iPad, so the basics are an iPad that supports Apple Pencil, a pressure-sensitive Pencil, and the app, which is a one-time purchase rather than a subscription. You can letter with a finger, but pressure sensitivity is what gives you thick-and-thin stroke variation, which matters most for script and brush lettering.
A matte, paper-textured screen protector is optional. Some letterers like the extra friction for stroke control, though it is a preference rather than a requirement.
Set Up the Canvas for Motion Work
Most Procreate lettering tutorials target print, with 3000 × 2000 px at 300 DPI as a typical example. If your lettering will end up in a timeline, plan for the delivery format instead:
- Canvas size: Match your comp. A 3840 × 2160 canvas gives you room to scale in After Effects without softening edges.
- Color profile: Choose RGB for anything that lives on a screen. CMYK is for print.
- Layer budget: Procreate caps the number of layers based on canvas size and device. A larger canvas means fewer layers, so plan your structure before you start. One layer per word or letter is useful for animation but can eat your budget on a 4K canvas.
- Background: Hide or delete the default background color so your export has transparency.
If you expect to animate letter by letter, decide now. It is much easier to ink each letter on its own layer than to cut a flattened word apart later.
Step 1: Sketch Thumbnails First
Lettering is closer to illustration than handwriting. Treat the words as shapes that need a composition, not a sentence on one line.
- Write out your phrase and underline the words that carry the meaning. Those get the most visual weight.
- Draw several rough thumbnails, putting words on different lines and in different sizes. Quick and ugly is fine. You are deciding hierarchy and layout, not finishing letters.
- Try mixing styles, such as a flowing script for one emphasis word against a blocky or condensed style for the supporting words.
- Sketch a loose bounding shape, like a rectangle, circle, or banner, and test whether your words fill it comfortably.
Use a light, high-contrast sketch color such as bright red so it stays readable when you ink over it. Any pencil-style brush works for this stage.
Once you pick a thumbnail, select it, copy it to a new layer, and scale it to fit the canvas. Lower that layer's opacity so it becomes a reference for the next pass.
Step 2: Build a Guide Layer
There are three reliable ways to get clean proportions, and they combine well.
Trace a typeface
Use the Text tool to type your words, pick a font close to the structure you want, reduce the text layer's opacity, and trace on a new layer above it. This is especially useful for block or bubble letters, and for long quotes where spacing and alignment are tedious to eyeball. Proof the spelling before you trace, because a typo discovered after inking costs you the whole pass.
Turn on Drawing Guides
Go to Actions (wrench icon) > Canvas > Drawing Guide and set the grid size to match your letter scale. Baselines, x-heights, and cap heights are much easier to hold when the grid is visible. For angled or radial layouts, the Symmetry tool or a custom grid can help.
Use Quick Shape for straight lines
For rectangles, banners, and baseline rules, draw a line and hold the Pencil at the end of the stroke until it snaps straight. Holding a finger on the canvas while you do this constrains the line to perfectly horizontal or vertical. If a line overshoots, erase the overlap.
Step 3: Ink the Letters
This is where most beginners get frustrated, and almost every problem comes down to brush settings and stroke habits.
Pick a brush that fits the style
Script and calligraphy need a brush that responds to pressure with thin upstrokes and thick downstrokes. Block lettering and monoline styles are better served by a consistent-width brush. Start with the built-in inking brushes before downloading anything. Third-party lettering sets, such as outline, halftone, or woodcut-style brushes, are useful once you know the style you are after.
Use stabilization, but not too much
Procreate is sensitive enough that curved strokes can come out shaky. Open the brush settings, find Stabilization (also called StreamLine), and raise the amount. Around 60% is a sensible starting point. Push it much higher and the stroke starts lagging behind your hand, which makes control harder. If a brush feels like it is overcorrecting, lower the value. A sketching pencil with no built-in stabilization will follow your natural handwriting more closely, which is why you may want different settings for sketching and inking.
Control stroke endings
If your strokes end in a small bump or a point instead of a clean flat edge:
- Pause for a beat before lifting the Pencil.
- Lift straight up or back along the stroke, not away from it.
- Pause briefly at the start of a stroke before dragging if the top is coming out tapered.
If you want a tapered stroke, use gradual pressure instead. The point is to choose the ending deliberately.
Ink in sections
Work on a new layer above your guide. Draw each stroke in one confident motion, and undo with a two-finger tap rather than correcting by overdrawing. For animation-bound pieces, ink each letter or word on its own layer and name the layers as you go.
Step 4: Refine Shapes and Spacing
Digital lettering lets you fix things that paper never would.
- Transform and Warp: Select a word or letter and use Warp to straighten a wobbly baseline or even out spacing between words.
- Move letters individually: If you inked on separate layers, kerning is a drag away.
- Hide the guides: Turn off the sketch and traced-text layers regularly to check the lettering by itself. Awkward gaps show up quickly once the scaffolding is gone.
- Add flourishes last: Swirls, stars, and underlines go on once the core letterforms and spacing are settled.
Step 5: Color, Texture, and Finish
Lock the transparency of an inked layer (Alpha Lock) to recolor it without touching the edges. Add texture or shading on clipped layers above it, so the base lettering stays clean. Keeping line work, fills, and texture on separate layers makes the file far more useful in a compositing pipeline.
Common Lettering Mistakes in Procreate
- Stabilization set too high: Strokes feel disconnected from your hand.
- Letters on one flattened layer: You lose the option to animate or adjust individual shapes.
- Canvas too small: Scaling up in post softens the edges.
- Lettering as a single line of text: Without hierarchy and composition, it reads as typed text rather than designed lettering.
- Skipping the proofread: Check spelling before tracing and inking.
Take Your Lettering Into After Effects
Procreate can export PNG with transparency, layered PSD, and other formats. For motion work, a layered PSD or a set of transparent PNGs per word is the usual hand-off. In After Effects you can then:
- Import the PSD as a composition with layers retained and animate each letter's position, scale, and opacity.
- Add a Trim Paths–style reveal by converting a traced version to shape layers, or use masks and track mattes to write letters on.
- Layer textures and grain in the comp rather than baking everything into the Procreate file.
- Pre-comp finished lettering so it can be reused across a title sequence.
Procreate also has Animation Assist for frame-by-frame work, so you can hand-animate a boiling line effect or a write-on directly on the iPad and export the frames. Either way, keep a clean master lettering file you can return to.
Extending Hand Lettering with Styleframe
Once you have finished lettering, a common next question is how to push it further without redrawing everything. is an AI video and motion tool built for artistic control rather than one-click output, and your Procreate artwork can serve as an input for it. Procreate remains the place where the lettering itself gets made, and Styleframe is a way to extend it into motion.
Quick Workflow Checklist
- Create a canvas at your delivery resolution, in RGB.
- Sketch thumbnails and choose a hierarchy.
- Build a guide with traced text, a drawing guide grid, or Quick Shape lines.
- Ink with stabilization around 60% and deliberate stroke endings.
- Refine with Warp and Transform, then add flourishes.
- Color with Alpha Lock and clipped texture layers.
- Export a layered PSD or transparent PNGs and animate in After Effects.
Practice a handful of pieces using this same loop, and your layouts, stroke control, and file hygiene will improve quickly.